keckdaq Observations Logbook
Please add observation logs in reverse chronological order. All data
taken for analysis (both observations and instrument tests) should be
noted here. Include UT start and stop times (format is
YYMMDD hh:mm:ss, as in the log files), and a brief description of the
state of the instrument and tests carried out.
keckdaq Run 9 (Rx0, Rx1, Rx2, Rx3, Rx4; Feb 6 2016 - )
LINKS:
keckdaq Run 8 |
keckdaq Run 7 |
keckdaq Run 6 |
keckdaq Run 5 |
keckdaq Run 4 |
keckdaq Run 3 |
keckdaq Run 2 |
keckdaq Run 1 |
keckdaq Run 0 |
mapodaq (summer lab tests)
-
191115 21:15:05
- Blanking plate removed from rx1 21:00 191115.
- Rx3 compressor off 22:45 UTC
- Had some trouble retuning but now writing to
/data/smurf_data/20191115/1573858477/outputs/1573859000.dat
. Steps still there
-
191114 02:14:13
- Compressor off on rx0 02:13:00. Pulled plug on motor driver 2 minutes later.
- Heaters all set to 2.0V, 04:24:15
- Cycle rx13 only, 18:16:19
- rx0 FPU ~100K. Gauge reads 13 torr.
- rx2 FPU off at 23:00UTC.
-
191112 19:45:05
- 191112 02:00 removed forebaffles on rx13. Installed blanking plates on both, without WTF plate
- Restarted masd on the 4 mce receivers to explicitly zero their biases. We will start pulling crates today.
191112 19:38:10 mce_stop_acq
191112 19:41:05 mceGeneric mce_zero_bias, mce=mce0
191112 19:41:07 mceGeneric mce_zero_bias, mce=mce2
191112 19:41:08 mceGeneric mce_zero_bias, mce=mce3
191112 19:41:09 mceGeneric mce_zero_bias, mce=mce4
- MCE power supply off 21:50:04.
- Removed mce's on rx024. Leaving smurf and rx3 in case we want to do further testing.
- compressor off on rx4 191113 02:15:16. Pulled plug on motor driver 2 minutes later.
- 09:43 all pumps, heat switches set to 4.5V to add more heat. FPU above 20K, He3/4 condensers around 50K.
- Okay maybe that was too much heat. 09:47:01 bumping down to 2.0V each. Much more controlled!
- 14:50 pressures went up to 1e-2mbar. Heaters bumped up to 4V on pumps, 3V on heatswitches. They're probably not doing very much.
- 01:48 FPU at 178K, pressures 2.2torr. Pulled rx3 mce out; flipped off the MCE power supply, pulled smurf crate off
-
-
- Robert is gone :( Marion and Cyndia and Ta-Lee will attempt not to break anything
- Forebaffles for rx024 removed. Blanking plates installed. rx4 (receiver E) had an Allen ball stuck into its screw, making it impossible to get the forebaffle off. Took the WTF plate and forebaffle off together. Steele will fix it. rx13 forebaffles remain.
- Fridge cycle completed; rx0 looks good.
- Taking CMB data with forebaffles neighboring rx3 removed, in case that proves useful for correlated noise debugging
- Unlocked mount, slewed back to el=65
- 191109 02:21:36 Starting schedule: /home/keck/sch/mce_autotune.sch
- 191109 02:26:45 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_498.sch
- 191109 22:32:48 Exiting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_498.sch
- Why was that so quick? Looks like it only did one phase and then gave up. Trying again
- 191109 23:53:58 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_499.sch
- Realized that masd1 isn't receiving commands. Tried rebooting masd1, to no avail. Abort schedule, reboot all of masd.
- Trying again: 191109 23:59:20 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_499.sch
- masd1 looks happy again
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_497.sch
- rx0 only reached 0.315K, this time I disengaged the connectors on the cryostat side of the HK backpack
- FPU temperature shot up to 3K and rising
- looks like a connection between cryostat and HK backpack was the problem
- rx0 is cooling, did another cycle, reached target temperature
- 191107 13:42:51 abort_schedule
- 191107 13:43:11 Starting schedule: /home/keck/sch/mce_autotune.sch
- 191107 13:48:20 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_497.sch
- 191108 19:44:52 abort_schedule
- terminated last CMB run for SPUD/Keck :'( :)
- /home/keck/sch/runend.sch
- weather: mostly clear, overcast, clearing
- windows and baffles:
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_496.sch
- rx0 still warm, trying to cool it back down
- 191105 13:50:16 abort_schedule
- restarted with all 5rx again
- 191105 13:50:21 Starting schedule: /home/keck/sch/mce_autotune.sch
- 191105 13:53:44 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_496.sch
- rx0 doesn't cool down all the way about 40mk above traget
- 191105 23:32 started cycle on rx0
- restarted system check and setup on smurf per request
- multiple cycles on rx0 but only reached about 0.32K but each successive cycle was a bit lower
- removing cables and reinserting them didn't help, also command all heaters off
- /home/keck/sch/runend.sch
- /home/keck/sch/heaters_off.sch
- weather: clear, getting hazy
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 191104 10:54:33 Starting schedule: /data/keckdaq/autoqueue/pending/1_stareandscan_1_002.sch
- 191104 15:20:06 Starting schedule: /data/keckdaq/autoqueue/pending/1_stareandscan_1_003.sch
- 191104 17:37:50 Starting schedule: /data/keckdaq/autoqueue/pending/1_stareandscan_1_004.sch
- rx0 warmed up fast about 2h after the fridgecycle
- did only a cycle on rx0 which looked good on the graph, but FPU went totally nuts and warmed up to 20K
- no indication what was wrong, all other temps looked normal!!!??
- weather: clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- installed blanking plate on rx1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_495.sch
- 191103 09:47:25 abort_schedule
- mostly clear running the special schedules
- the schedules will start with 1 and 2 so I can queue them for the next few hours
- 191103 09:56:20 Starting schedule: /data/keckdaq/autoqueue/pending/1_stareandscan_1_001.sch
- 191103 12:03:24 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_withazscan_1_001.sch
- 191103 20:50:49 Starting schedule: /data/keckdaq/autoqueue/pending/2_knoise_responsivity_withazscan_1_002.sc
- /home/keck/sch/runend.sch
- weather: thin clouds, overcast, mostly clear, clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- finally rx0 had a good cycle, also the fastest again
- for whatever reason, examiner plots are only produced for every second run
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_494.sch
- rx0 didn't take the fridgecycle during last run well, problems to get it cold
- problems with cooling rx0
- /home/keck/sch/runend.sch
- weather: clear overhead, clear, thin clouds
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_493.sch
- updated ephem
- restarted gcp and masd at skydip
- 191029 14:26:09 Starting schedule: /home/keck/sch/mce_autotune.sch
- 191029 14:27:59 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_493.sch
- doesn't look like the update of ephem worked
- 191029 23:19:42 abort_schedule
- tried the update again, thanks Justin
- restarted gcp and masd, this time it worked :)
- 191029 23:21:17 Starting schedule: /home/keck/sch/mce_autotune.sch
- 191029 23:23:06 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_493.sch
- /home/keck/sch/runend.sch
- weather: clear, thin clouds, mostly clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- rx0 cycle used to be the fastest one, but now slower than rx2,3,4, but we gonna make it for another week ;)
- KeckViewer froze, keck32 unresponsive, restarted keck31 and 32
- ephem files need updating, will try today during DSCS
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_492.sch
- /home/keck/sch/runend.sch
- weather: hazy, clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_491.sch
- /home/keck/sch/runend.sch
- weather: hazy
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_490.sch
- rx1 took a while for the temperatures to normalize and be ready to cycled
- cycled rx1
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: windows clear, very little snow on the baffles
-
- cyclefridge enable=2, on all rx
- massive He leak on B high, rx1 that is why the last cycles were so elongated
- replace bad line with last spare on the right side
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_489.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: clear overhead, clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- TCM C on rx0 is on???
- restarted gcp, masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_488.sch
- keck 33 unresponsive, had to be rebooted but never started to take data
- /home/keck/sch/runend.sch
- weather: hazy, mostly clear overhead
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 2, 3, 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_487.sch
- run crashed, but wired, since there were still a few updates
- 191017 12:47:14 Starting schedule: /home/keck/sch/mce_autotune.sch
- 191017 12:49:03 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_487.sch
- cycled rx1, did only single cycles ?????
- /home/keck/sch/runend.sch
- weather: overcast, clearing, hazy
- windows and baffles: windows clear, some snow in and on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_486.sch
- only rx2,3,4 are cold for this run
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, clouds moving in
- windows and baffles: windows clear, very little snow on the baffles
-
- cyclefridge enable=2, on all rx
- 191015 01:09:09 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- 191015 02:49:33 Exiting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- rx1 warmed up dramaticall, FPU went to 40K, only after pumping on rx1 did the temperature go back down
- aborting the cycle also affected the other cycles, rx0 FPU warmed up to 6K
- run another single cycle on all rx, except rx1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_485.sch
- masd4 running again but masd1 is not
- 191013 06:19:44 abort_schedule
- rerun rx1 setup
- 191013 06:22:59 Starting schedule: /home/keck/sch/mce_autotune.sch
- 191013 06:24:47 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_485.sch
- masd1 still not running
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clearing
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_484.sch
- masd4 stopped, restarting keck37 didn't help
- masd1 not running
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow
- windows and baffles: windows clear, little snow in the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_483.sch
- was notfied today that rx1 is doing test during DSCS, that explains strange behaviour
- system crashed
- restarted gcp, masd
- kicked rx1 out of the loop until I hear back
- 191009 12:06:34 Starting schedule: /home/keck/sch/mce_autotune.sch
- 191009 12:12:43 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_483.sch
- cycled rx1
- but did only a single cycle again
- also some "ghost" schedules showed in the queue, after the crashed run, but removing them acutually removed runend and fridgecycle schedules from the queue
- so late fridgecycle start, but good enough for the all rx except rx1
- /home/keck/sch/runend.sch
- weather: thin clouds, overcast, blowing snow
- windows and baffles: windows clear, some snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- installed the last 2 az spare lines
- installed baffle for star pointing telescope
- power cycled all keck computers, because of wired kviewer behaviour during last run
-
- network problem, had to run out to MAPO to start run, frist scanset missing
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_482.sch
- kviewer seemed a bit strange, downsample < 9 jumped in and out during scanset/li>
- clk count and bolos kicking in and out on keck34
- /home/keck/sch/runend.sch
- weather: thin clouds
- windows and baffles: windows clear, very little snow in the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_481.sch
- keck35 froze, restarted keck35 and masd2
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clearing, thin clouds
- windows and baffles: windows clear, very little snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 2, 4
- leak in A high replaced with spare line, another leak on comp 2
- swapped to spare line
- installed one new spare
- swapped C low to spare line, hard to tell with multiple leaks, where He is coming from
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_480.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: thin clouds, overcast, blowing snow
- windows and baffles: windows clear, some snow in the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 4, leak in A low??
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_479.sch
- /home/keck/sch/runend.sch
- weather: thin clouds
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 3, 4
- A2 osborn roller dropped, shaft was sheered off, but looks like an old "injury"
- installed a new osborn roller
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_478.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: little haze, thin clouds
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_477.sch
- mediator crash
- 190927 16:54:23 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190927 16:57:24 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_477.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: clear, little haze
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_476.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 3, 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_475.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: mostly clear, thin clouds
- windows and baffles: windows clear, very little snow on the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_474.sch
- massive az-diff jump, rehomed, data are good after schedule resume
- 190922 01:11:31 suspend_schedule
- 190922 01:23:42 resume_schedule
- cycled rx1
- /home/keck/sch/runend.sch
- weather: thin clouds, overcast, clearing
- windows and baffles: windows clear, little snow in the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_473.sch
- kviewer, plots look strange but pages are being updated??
- also see the plots on the monitor website, so I assume it's just a kview glitch
- restarting kview, fixed the problem
- /home/keck/sch/runend.sch
- weather: mostly clear, thin clouds
- windows and baffles: windows clear, some snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- removed blanking plate on rx1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_472.sch
- cycled rx1
- 190918 15:57:16 suspend_schedule
- one az-diff value, sporadically went just over 30k, the data will be good!!!!, rehomed
- 190918 15:57:16 suspend_schedule
- /home/keck/sch/runend.sch
- weather: blowing snow, overcast, clearing
- windows and baffles: windows clear, some snow in the baffles
-
- cyclefridge enable=2, on all rx
- replaced bad He line with new spare
-
- /home/keck/sch/mce_autotune.sch
- since weather is good I will run k_noise schedule for rx1
- 190915 08:15:47 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_12_003.sch
- 190915 14:39:53 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_471.sch
- /home/keck/sch/runend.sch
- weather: clear, very cold, storm moving in, blowing snow, overcast
- windows and baffles:
-
- cyclefridge enable=2, on all rx
- leak E high
- replaced line with spare
- installed blanking plate on rx1 for knoise test
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_470.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: thin clouds, clear overhead, getting cold again
- windows and baffles: windows clear, very little snow on the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 5, possible leak
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_469.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: clearing, thin clouds
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_468.sch
- 190909 14:21:11 suspend_schedule
- az-diff jump, replaced readhead 1A
- rehomed
- 190909 14:59:33 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear, overcast, blowing snow
- windows and baffles:
-
- cyclefridge enable=2, on all rx
- 190909 03:10:36 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 190909 07:06:59 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_467.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: thin clouds, clear
- windows and baffles:
-
- cyclefridge enable=2, on all rx
- recharged comp 2, 3, 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_466.sch
- 190905 16:17:02 suspend_schedule
- massive az-diff jump, rehomed, data good after resume schedule
- 190905 16:24:44 resume_schedule
- cycled rx1
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow
- windows and baffles: overcast, blowing snow, improving, thin clouds
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_465.sch
- 190905 02:33:13 abort_schedule
- because weather is really bad I used the last few minutes for some magnetic testing on rx1
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow
- windows and baffles: windows clear, lots of snow in and on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_464.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: clouds moving in, blowing snow, overcast
- windows and baffles: windows clear, lots of snow in the baffles
-
- 190903 03:03:49 Starting schedule: /home/keck/sch/mce_autotune.sch
- before fridgecycle, I did some magnetic testing on rx1
- see obs log "magnetic testing rx1"
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_463.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_462.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: thin clouds, clear, hazy
- windows and baffles:
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_461.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, hazy, thin clouds
- windows and baffles: windows clear, some snow in and on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- vibration testing on rx1 and all other rx
- /data/keckdaq/autoqueue/pending/9_kCMB_50_460.sch
- mediator crashed right at end of cmb schedule
- restarted gcp and masd
- weather: overcast, clearing
- windows and baffles: windows clear, very little snow in the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_459.sch
- /home/keck/sch/runend.sch
- weather: overcast, mostly hazy
- windows and baffles: windows clear, some snow in and on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_458.sch
- /home/keck/sch/runend.sch
- weather: little hazy, overcast
- windows and baffles: windows clear, quite a bit of snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_457.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: little haze, mostly clear overhead
- windows and baffles: windows clear, very little snow on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_456.sch
- vibration test rx1, see log file
- /home/keck/sch/runend.sch
- weather: clear, getting hazy
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- replaced raid controller in keck34
- dev 1 shows error, but keck34 boots of dev0
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_455.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: mostly clear, clear, cold
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 3, 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_454.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: very hazy, clearing
- windows and baffles: windows clear, some snow in and on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_453.sch
- /home/keck/sch/runend.sch
- weather: clear, getting hazy
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_452.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: clear, wind easing
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- removed blanking plate on rx1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_451.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: mostly clear, blowing snow
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_450.sch
- keck 35 unresponsive
- 190804 10:37:52 abort_schedule
- rebooted keck35 restarted masd
- 190804 10:42:12 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190804 10:44:00 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_450.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_449.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- 190802 06:37:05 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 190802 07:52:04 abort_schedule
- didn't see suddenly any stars, besides totally clear skies and clear camera
- after restarting the schedule it worked again, started where I left off in the previous starpoint
- 190802 07:59:26 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 190802 09:55:38 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_448.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_447.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_446.sch
- cycled rx1
- /home/keck/sch/runend.sch
- vibration test on rx1 with 0 bias, see log entries "vibration test"
- weather: clear, hazy, blowing snow, clearing
- windows and baffles: windows clear, some snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 2, 4
-
- /home/keck/sch/mce_autotune.sch
- vibration test on rx1, see log file
- /data/keckdaq/autoqueue/pending/9_kCMB_50_445.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_444.sch
- Justin asked to cold reboot computers, did during galaxy scan, since weather is still bad
- 190724 10:23:17 abort_schedule
- rebooted keck31-37
- 190724 11:29:33 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190724 11:32:34 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_444.sch
- /home/keck/sch/runend.sch
- weather: high winds, blowing snow, very hazy, wind dying, clearing
- windows and baffles: windows clear, some snow in the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_443.sch
- cycled rx1
- /home/keck/sch/runend.sch
- weather: high winds, blowing snow, overcast, hazy
- windows and baffles: windows clear, lots of snow in and on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 190719 11:51:16 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_12_002.schx
- 190719 18:17:09 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_442.sch
- /home/keck/sch/runend.sch
- weather: clear, getting hazy, high winds, blowing snow
- windows and baffles: windows clear, lots of snow in and on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_441.sch
- 190717 12:21:19 abort_schedule
- rehomed
- 190717 12:21:39 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_441.sch
- /home/keck/sch/runend.sch
- weather: clear, cold, first time below -100F
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_440.sch
- cycle on rx1
- powercycled smurf computer and run setup of crate
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_439.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_438.sch
- cycle on rx1
- /home/keck/sch/runend.sch
- weather: overcast, clearing, clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_437.sch
- /home/keck/sch/runend.sch
- weather: clear, overcast, warming up
- windows and baffles: windows clear, some snow in the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_436.sch
- cycle on rx1
- /home/keck/sch/runend.sch
- weather: mostly clear, but still blowing snow, wind dying, clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_435.sch
- started one scanset late, see below
- cycle on rx1
- /home/keck/sch/runend.sch
- weather: quite hazy, blowing snow, mostly clear
- windows and baffles: windows clear, very little snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- late fridge cycle
- recharged comp 2, 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_433.sch
- ATTENTION: run 434 before run 433
- cycle on rx1
- mediator crashed
- 190704 15:38:02 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190704 15:41:41 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_433.sch
- didn't realize we were in the 2nd half of run, didn't alter the scheudle before restart
- 190705 08:48:50 abort_schedule
- /home/keck/sch/runend.sch
- weather: clear, getting hazy, wind picking up, blowing snow
- windows and baffles: windows clear, some snow in the baffles
-
- cyclefridge enable=2, on all rx
- 190703 08:10:02 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 190703 12:19:57 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_434.sch
- ATTENTION: run 434 before run 433
- /home/keck/sch/runend.sch
- weather: little hazy, haze, clearing
- windows and baffles: windows clear, very little snow on baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_432.sch
- cycle on rx1
- /home/keck/sch/runend.sch
- weather: mostly clear, wind picking up, blowing snow
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- readjusted readhead 3A
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_431.sch
- az-diff jump just over 30k rehomed, was during skydip, so all data are good
- 190627 23:05:48 resume_schedule
- el current drifting
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, wind dying, clearing
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_430.sch
- cycled rx1, first cycle had problems
- cycled rx1 again, this time it worked
- /home/keck/sch/runend.sch
- weather: haze, blowing snow, very hazy
- windows and baffles: windows, 2" spot of snow in the center, quite a bit of snow in and on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_429.sch
- 190624 13:03:12 keck34 running again from raid
- /home/keck/sch/runend.sch
- weather: haze, blowing snow
- windows and baffles:
-
- cyclefridge enable=2, on all rx
- keck34 running at the moment via external USB HDD
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_428.sch
- rebuilding raid on keck34
- /home/keck/sch/runend.sch
- weather: clear, haze
- windows and baffles:
-
- cyclefridge enable=2, on all rx
- recharged comp 2, 3
- disk problems on keck34 raid degraded
- swapped bad disk but, problems with the raid controller
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_427.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, wind easing, clearing
- windows and baffles: windows clear, very little snow in and on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_426.sch
- el current drift
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow
- windows and baffles: windows clear, some snow in and on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_425.sch
- cycled fridge on rx1
- /home/keck/sch/runend.sch
- weather: hazy, clear, cold, hazy, wind picking up
- windows and baffles: windows clear, lots of snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_424.sch
- /home/keck/sch/runend.sch
- weather: clear, hazy
- windows and baffles: windows clear, very little snow on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_423.sch
- 190611 22:50 signalhound disconnected antenna
- 190612 22:28 signalhound connected antenna
- /home/keck/sch/runend.sch
- weather: little haze, clear, cold
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_422.sch
- keck36 unresponsive, needed reboot
- 190609 15:01:30 abort_schedule
- 190609 15:01:36 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190609 15:05:13 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_422.sch
- /home/keck/sch/runend.sch
- weather: clear, hazy
- windows and baffles: windows clear, lots of snow in the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_421.sch
- cycled fridge on rx1
- /home/keck/sch/runend.sch
- weather: mostly clear, clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- leak in B-high, rx1
- replaced with spare line
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_420.sch
- cycled fridge on rx1
- /home/keck/sch/runend.sch
- weather: very hazy, mostly clear, hazy, clearing
- windows and baffles: windows clear, quite a bit of snow on the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 2, 3, possible leak in 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_419.sch
- cycled fridge on rx1
- /home/keck/sch/runend.sch
- weather: clear, very hazy
- windows and baffles: windows clear, some snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- 190603 10:25:00 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 190603 13:58:10 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_418.sch
- mediator crashed, restarted gcp, masd
- 190601 23:21:31 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190601 23:27:34 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_418.sch
- /home/keck/sch/runend.sch
- weather: very hazy, clearing, clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 2
- installed blanking plate on rx1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_417.sch
- cycled rx1
- cycled rx1 a second time
- /home/keck/sch/runend.sch
- weather: hazy, very hazy
- windows and baffles: clear, very little snow in and on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_416.sch
- 190528 22:30:13 az-diff jump, readjusted readhead A1
- data good again after schedule resume
- cycled rx1
- /home/keck/sch/runend.sch
- weather: mostly clear, hazy
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_415.sch
- 190527 09:59:05 starting cycle on rx1
- az-diff getting just over 30k, did a homing
- several el-current drifts
- /home/keck/sch/runend.sch
- weather: clear, very hazy, clearing
- windows and baffles: very little snow in the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_414.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- 190524 10:26 to 10:29 used radio in MAPO for signalhound test
- radio signal shows up in signalhound
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_413.sch
- 190523 21:41:54 started cycle on rx1
- /home/keck/sch/runend.sch
- weather: hazy, clearing, clear
- windows and baffles: windows clear, little snow on the baffle
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_412.sch
- rx1 stayed cold the whole schedule
- /home/keck/sch/runend.sch
- weather: clear, hazy, thin clouds, wind picking up
- windows and baffles: windows clear, some sown in and on the baffles
-
- cyclefridge enable=2, on all rx
- installed new spare line #7, 5 left
- patching bad lines won't work
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_411.sch
- 190518 22:00:53 stopped masd1, double cycle on rx1
- massive He leak comp4 rx3, replaced line with spare
- replaced plug on forebaffle heater at variac
- /home/keck/sch/runend.sch
- weather: little haze, very hazy, clearing, clear
- windows and baffles: windows clear, very little snow on the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 4
- propable leak
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_410.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, clearing a bit, wind dying
- windows and baffles: windows clear, some snow on the baffles
-
- fridgecycles failed to start, since rx1 cycle was still in a hang up state
- had to abort cycles via keckViewer
- cyclefridge enable=2, on all rx
- recharged comp 4
- had to abort cycle on rx1 after all other rx finished
- started another cycle via keck31 on rx1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_409.sch
- 190514 22:17:23 masd4 stopped, restarted masd4
- some problems with rx1, restarted all services
- tried rx1 cycle via keck31, but fridgecycle failed due to new parameters
- /home/keck/sch/runend.sch
- weather: very hazy, hazy, blowing snow
- windows and baffles: windows clear, some snow on the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 2,3
- rebooted keck33-37
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_408.sch
- rx1 warmed up early
- masd3 stopped
- /home/keck/sch/runend.sch
- weather: clear, little haze, very hazy
- windows and baffles: windows clear, quite a bit of snow on the baffles
-
- cyclefridge enable=2, on all rx
- 190512 12:28:26 reset time on keck31, 32 and omega0, now UTC and GPS in KeckViewer show same time again
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_407.sch
- rx1 warming up early
- gps and computer time are off
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_406.sch
- 190510 07:14:46 stopped masd1, rx1 already at 2.6K
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, clearing
- windows and baffles: windows clear, little snow on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_405.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow
- windows and baffles: windows clear, some snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_404.sch
- rx1 warming up early
- /home/keck/sch/runend1.sch
- weather: hazy, blowing snow
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_403.sch
- 190502 22:43:54 run died due to work on rx1
- 190503 03:51:53 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190503 03:53:42 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_403.sch
- run setup and check on rx1
- massive He leak in C high, rx2
- replaced bad line with new one
- /home/keck/sch/runend1.sch
- weather: clear, getting hazy, high winds, blowing snow
- windows and baffles: windows clear, some snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- 190502 12:31:57 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 190502 16:35:22 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_402.sch
- 190502 00:09:40 suspend_schedule, huge az-diff jump, rehomed
- 190502 00:19:17 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: windows clear, very little snow in and on the baffle
-
- cyclefridge enable=2, on all rx
- massive He leak A high, rx0, swapped to spare
- installed new spare line
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_401.sch
- rx1 warmed up quite a bit, more than other times
- mediator crashed
- restarted gcp and masd
- 190430 07:04:40 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190430 07:06:28 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_401.sch
- /home/keck/sch/runend1.sch
- weather: hazy, clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_400.sch
- /home/keck/sch/runend1.sch
- weather: thin clouds, hazy
- windows and baffles: windows clear, some snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- installed new He spare line, 8 left
-
- starting run without rx1, great conditions so don't want to let the other rx wait
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_399.sch
- rx1 warmed up early, did an early cycle
- this cycle looked normal!!! so changes worked in this respect
- /home/keck/sch/runend.sch
- weather: clear, thin clouds, warming
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- He leak A low, which was anticipated
- replaced bad line with spare line
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_398.sch
- run stopped, since that doesn't happen normally I suspect the stuff they did on rx1 during the DSCS pass
- 190424 01:05:51 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190424 01:10:13 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_398.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 3
- put new He spare line in, 9 to go
-
- late start due to rx1
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_397.sch
- 190421 18:07:13 rx1 warming up
- early cycle on rx1
- some frequency changes on power but no outage
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 3,5
- He leak, replaced E low with spare
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_396.sch
- 190419 around 00:00, masd1 stopped
- Ari asked to restart smurf computer, did that and running through setup
- masd1 working again
- mediator crashed
- restarted gcp and masd
- 190419 11:45:38 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190419 11:52:39 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_396.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, clearing, temperature dropping, haze
- windows and baffles: windows clear, very little snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 2,3,5
-
- rx1 had a slow cycle again, missed first scansets
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_395.sch
- mediator crashed
- restarted gcp and masd
- 190418 00:44:10 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190418 00:50:19 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_395.sch
- rx1 warmed up early, did an early cycle on rx1
- /home/keck/sch/runend.sch
- weather: blowing snow, overcast, wind dying, only thin clouds
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 3,5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_394.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, blowing snow, overcast, haze
- windows and baffles:
-
- cyclefridge enable=2, on all rx
- recharged comp 3,5
-
- missed the first 2 scansets since rx1 cycle was too slow
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_393.sch
- mediator crashed
- restarted gcp and masd
- 190413 02:04:49 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190413 02:08:26 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_393.sch
- rx1 warming up early
- did early double cycle on rx1 to get it ready in time for next run
- /home/keck/sch/runend.sch
- weather: mostly clear, clear, thin clouds
- windows and baffles: windows clear, quite a bit of snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 3,5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_392.sch
- about 190412 09:10 very brief power outage
- no warmup
- /home/keck/sch/runend.sch
- weather: mostly clear, haze, mostly clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_391.sch
- about 190409 07:10 a series of brown outs, unstable power for a few minutes
- 4 compressors where off or in a state where they wouldn't auto power on
- no massive warm up, should recover, but still aborted run and turned bias etc off since it idles to a quicker recovery
- all rx warmed up to about 330mk only rx1 was like a rock in the surf not showing any warm up!?
- 190409 08:06:03 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190409 08:09:43 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_391.sch
- 190409 16:41 power outage close to 20min
- 190409 17:57:01 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190409 18:00:38 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_391.sch
- this time rx1 warmed up and didn't stay cold long
- 190409 21:49:48 started fridgecycle on rx1
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 3,4,5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_390.sch
- mediator crashed
- restarted gcp and masd
- 190407 10:37:03 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190407 10:40:49 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_390.sch
- mediator crashed again
- restarted gcp and masd
- aborted run
- /home/keck/sch/runend.sch
- weather: thin clouds, clear
- windows and baffles: windows clear, very little snow in the baffles
-
- cyclefridge enable=2, on all rx
- recharged comp 3,5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_389.sch
- rx1 warm from the beginning
- started a single cycle on rz1 before the schedule was finished
- /home/keck/sch/runend1.sch
- weather: thin clouds, blowing snow
- windows and baffles: windows clear, quite a bit of snow in and on the baffles
-
- cyclefridge enable=2, on all rx
- 190404 12:11:19 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- 190404 13:42:43 Exiting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_388.sch
- late start, rx1 wasn't ready
- mediator crashed
- restarted gcp and masd
- antenna1 wouldn't start, rebooted keck31
- since there were only 2 scansets left decided to cycle and trying starpointing
- weather: haze, blowing snow
- windows and baffles:
-
- cyclefridge enable=2, on all rx
- recharged comp 2,3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_387.sch
- mediator crashed
- restarted gcp and masd
- 190401 11:05:43 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190401 11:09:21 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCM
- /home/keck/sch/runend.sch
- weather: haze, blowing snow
- windows and baffles: windows clear, little snow on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_12_001.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_386.sch
- rx1 stayed cold :)
- /home/keck/sch/runend.sch
- weather: mostly clear, thin clouds, haze, blowing snow
- windows and baffles: windows clear, little snow in and on the baffles
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_385.sch
- rx1 warmed up early again
- stopped masd1
- started an early fridgecycle on rx1 to see if the next cycle is back to normal length
- 190329 06:37:11 cycleFridge enable=2, rx=rx1
- /home/keck/sch/runend1.sch
- weather: mostly clear, haze, thin clouds
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- He leak E Hi, comp 5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_384.sch
- 190326 21:30 rx1 starting to warm???
- temperature set point on rx1 got changed up North
- /home/keck/sch/runend1.sch
- mediator crashed
- restarted gcp and masd
- 190327 09:19:53 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_384.sch
- weather: clear, thin clouds
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
- recharged comp 3
- el current drifting apart
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_383.sch
- /home/keck/sch/runend.sch
- weather: clear overhead, clear
- windows and baffles: clear
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_11_003.sch
- /home/keck/sch/runend.sch
- masd4 unresponsive, restarted keck37
- weather: clear overhead
- windows and baffles: clear
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_11_001.sch
- 190322 17:17:06 Exiting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_11_001.sch
- 190322 17:17:06 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_11_002.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead
- windows and baffles: clear
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_11_001.sch
- rx1 is not running
- 190322 02:49:40 Exiting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_11_001.sch
- trobelshooting rx1, still get some error messages
- will start run now without rx1
- 190322 08:10:19 Starting schedule: /home/keck/sch/mce_autotune.sch
- got rx1 running
- 190322 08:29:14 abort_schedule
-
- cyclefridge enable=2, on all rx
CMB 2019
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_023.sch
- mediator crashed
- aborted run
- removed FFF
- cool down on all rx nominal, pumped on rx1
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_023.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_023.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_022.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_022.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_022.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_022.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_022.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_022.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_022.sch
-
- cyclefridge enable=2, on all rx
- rx2 is not responding to mce_stop_acq etc, restarted masd2
- rx2 doesn't cool down all the way, stuck at 500mK restarted keck35 and gcp/masd, after
- mceGeneric mce_zero_bias and mce_stop_acq rx2 FPU cooling down to nominal temp
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_022.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_022.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_022.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_021.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_021.sch
- mediator crashed
- 190312 09:27:14 abort_schedule
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_021.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_021.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_021.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_021.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_021.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_021.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_021.sch
- keck36 unresponsive, had to be rebooted, restarted masd3
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_021.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_021.sch
- mediator crashed
- 190306 22:50:16 abort_schedule
-
- cyclefridge enable=2, on all rx
-
-
- cyclefridge enable=2, on all rx
- recharged comp 3,4,5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_020.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_019.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_018.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_016.sch
-
- cyclefridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_017.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_017.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_017.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_016.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_016.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_016.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_016.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_016.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_016.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_016.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_016.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_016.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_015.sch
- masd1 stopped
- restarted smurf scripts
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_015.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_015.sch
-
- cyclefridge enable=2, on all rx
- replaced faulty line from last season with new spare
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_015.sch
- masd2 stopped
- restarted masd2, but since there is no new initialisation, stopped run
- 190220 02:03:53 abort_schedule
- rebooted keck33 to 37
- recharged comp 2 and 3
- restarted SMuRF services
- 190220 03:15:13 Starting schedule: /home/keck/sch/mce_autotune.sch
- masd1 stopped
- 190220 03:45:26 abort_schedule
- 190220 04:27:54 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190220 04:30:12 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_015.sch
- masd1 not updating???
- 190220 04:31:52 abort_schedule
- will run this schedule without rx1 until I hear back
- 190220 04:33:07 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_015.sch
- masd stopped on all rx?
- 190220 07:13:39 abort_schedule
- 190220 07:14:20 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_015.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_015.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_015.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_015.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_015.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_015.sch
-
- cyclefridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- SMuRF crate is powered off for autotune
- 190216 06:05:45 starting fridgecycle on rx 1
- 190216 06:09:57 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_015.sch
- mediator crashed in a new state?? just restarted mediator
- 190216 10:28:29 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_015.sch
- mediator crashed again, run was moved to ../done
- restarted masd and gcp
- 190216 10:57:26 Starting schedule: /home/keck/sch/mce_autotune.sch
- 190216 11:25:45 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_015.sch
- 190216 11:27:06 starting one more cycle on rx1
Winter 2019
-
- /home/keck/sch/mce_autotune.sch
- 190215 11:58:58 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_015.sch
- 190215 12:12:54 abort_schedule
- dk fatal fol error, handcontroller has strange behavior as well, have to investigate
- handcontroller had some lose screws inside, checked it all, dk still had strange behavior
- coudln't find anything else wrong, other axis worked ok
- rebooted keck31, handcontroller works normal again
-
- cyclefridge enable=2, on rx0,2,3,4
-
- cyclefridge enable=2, on all rx
- mediator crashed again in the same wired state as below, just restarting mediator doesn't work
- keck31 has to be rebooted before control system can be restarted !!??
- starting another single cycle
- 190212 11:02:12 Starting schedule: /home/keck/sch/fridgecycle.sch
- with SMuRF crate powered off the gap between the cycles is narrow again, also the hold time was 30+h
- mounted the FFF in BACK position, rx1 heating up, after compressores starting again, after 16h FPU about 75K
- Plug on cryostat is a bit funny, only opened after several tries, then jump in pressure, i.e. vacuum in cryostat
- not good, pumped for several hours
- all other rx good for cycle
-
- cyclefridge enable=2, on all rx
- smurf crate is powered off for cycle
- mediator crashed, could not restart until rebooted keck31 and keck32
- restarted cycle
-
- cyclefridge enable=2, on all rx
-
- cyclefridge enable=2, on all rx
- telescope locked out, pumping on vacuum lines
- problem with vacuum setup, so we put another pump underneath the rx to bypass the long az wrap line and big roughing pump
- vacuum on rx1 looked good, pressure change was indifferent when opening cryostat to outside vacuum
- glycol pump 1 stopped, all compressors turned off, due to overheating, switched to pump 2 manually
- after cooling down again, switched back to auto mode, pump 1 is running fine again??
-
- 9_kCMB_smurftest_50_015.sch - continued after SMuRF temperature test
- run died ???
- 190209 18:49:12 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_smurftest_50_015.sch
- run died ???
- 190209 19:20:21 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_smurftest_50_015.sch
- run died ???
- aborted run, starting fridgecyle, other stuff to do on the telescope
-
- Stopped CMB schedule to do SMuRF temperature test with crate off
- SMuRF crate powered off as per Ari's inastructions
- After one hour crate is powered back on, and SMuRF is re-initialized.
- During reinitilization SMuRF warmed up.
-
- /home/keck/sch/mce_autotune.sch (still waiting on timing solution)
- 9_kCMB_smurftest_50_015.sch - again late start due to fridge cycle
-
- /home/keck/sch/mce_autotune.sch (still waiting on timing solution)
- keck36 autotune did not respond. masd restart also failed. Robert is rebooted keck36
- Still not right. Reboot keck31. controlSystem restart
-
-
- /home/keck/sch/mce_autotune.sch (still waiting on timing solution)
- 9_kCMB_smurftest_50_014.sch - again late start due to fridge cycle
- Mediator crash -- there was a series of power blips on
station? -- around 1530, restarted at 20:15. However something
deeper was wrong, and eventually everything on keck32 died.
Restarted control system at 02:30 and all seems happy now.
- Started in phase D but waiting for 23:00 LST - aborted
schedule and started a new 9_kCMB_smurftest_50_014b.sch, with
phases BCD commented out.
-
-
- /home/keck/sch/mce_autotune.sch (still waiting on timing solution)
- 9_kCMB_smurftest_50_013.sch - again late start due to fridge cycle
- runend.sch
-
-
- /home/keck/sch/mce_autotune.sch (still waiting on timing solution)
- Carps in mount occasionally
- 9_kCMB_smurftest_50_012.sch - again late start due to fridge cycle
- Mediator crash at 0930, didn't catch until this morning at
2030. When mediator restarted, schedule resumed but was going to
wait till 2300 LST to start phase D (it's only 0230), so made an
abbreviated version of this schedule with phases B-D commented
out. But need to wait until 0330 to start it.
- 9_kCMB_smurftest_50_012b.sch
- Yet another mediator crash - this time restarted control
system, and then resumed schedule.
-
- Carps in mount
- fridgecycle.sch
-
- /home/keck/sch/mce_autotune.sch -- did not complete (does not
wait long enough for keck34 done signal, but SMuRF logs indicate
it worked anyway...working on solution)
- Carps in mount occasionally
- mce_autotune.sch
- 9_kCMB_smurftest_50_011.sch
- runend.sch
-
- Wasn't able to reduce 4K plate temperature by more than ~0.04
K by adjusting Rx1 compressor from 275-300 psi high side...go
ahead and try another cycle (will have a few hours before starting
CMB)
- fridgecycle.sch
-
- Fridge cycle for rx1 took longer than expected, so missed standard CMB schedule start time...
- /home/keck/sch/mce_autotune.sch -- did not complete?
- 9_kCMB_smurftest_50_011.sch
- Schedule stopped in the middle of Phase C elnod because it hit
soft negative az limit - didn't notice until this morning! Here's
what I think happened: yesterday when I cleaned the az track
during the fridge cycle, I knocked one of the az readheads out of
place (so most of the az enc diffs were huge), and then during the
schedule the telescope got confused and hit the limit switch.
- Confirmed: checked enc A and the left encoder was alternating
green/orange as it traveled. Replaced magnet so it's always
green. Doing compressor pressure tuning today.
-
-
- Fridge cycle for rx1 took longer than expected, so missed standard CMB schedule start time...
- /home/keck/sch/mce_autotune.sch -- did not complete?
- 9_kCMB_smurftest_50_010.sch
- runend.sch
-
-
- 9_kCMB_smurftest_50_009.sch
Because of previous gcp problems, started phase B a few hours late, but otherwise attempting a full 2-day schedule
- runend.sch
- Power cycled keck32, had to try several cycles of restarting gcp etc. to get mediator running and ssh ok.
- runend.sch
- fridgecycle.sch
- Carps are out of mount. Will run CMB schedule until the fridge runs out, test hold time
- 1_kCMB_smurftest_50_008.sch
- Mediator crash after a few hours. Tried restarting but then everything died, including ssh to keck32. Yikes.
- Removed BSNS.
- 1_kCMB_smurftest_50_007.sch, aborted in the morning because of carps in mount
- runend.sch (forgot to run fridge cycle!)
- Rotated BSNS 90 degrees, re-running mid-field beam map, then followed by CMB overnight to test system stability. Anticipate aborting in the morning because of carps in the mount.
- config_hw_Al.sch
- mast_raster_keck.sch
- 1_kCMB_smurftest_50_007.sch (autoqueue, started 190121 11:35:22, aborted 190121 19:57:21)
- runend.sch
- fridgecycle.sch
- Found that mediator had crashed overnight. Had to restart mediator and masd. Pmac seemed to be unresponsive as well. Restarted everything and retransferred control to gcp. Now running CMB followed by runend as an autoqueue. (2_kCMB_smurftest_50_006.sch, runedn.sch). Weather is bad. Running just to check system stability.
- Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_10_002.sch
- Cloudy. Running to make sure nothing crashes. Will have to optimize biases for real when the weather is clear.
- schedule /home/keck/sch/etacar_raster_keck.sch
- weather was clear at beginning of schedule but became cloudy. lower elevations see extended MAPO mast, but didn't seem much stronger than an elnod.
- schedule ~/sch/config_hw_Al.sch
- schedule ~/sch/mast_raster_keck.sch
- Start a new mast raster, finer el steps and wider az throw
- schedule ~/sch/mast_raster_keck.sch
- abort_schedule, carps working in the mount!
- Installed mount extender, found source again, trying scan that should get most of the FPU
- schedule ~/sch/mast_raster_keck.sch
- schedule ~/sch/fridgecycle.sch
- Skies cleared up, try again
- schedule ~/sch/etacar_raster_keck.sch
- Earlier started full CMB obs (only Gal phase ran). Aborted after phase finished because weather looked promising.
- Ari found something that looks like a repeatable beam-shaped dip in Rx1. Weather is decent so trying an abbreviated schedule.
- schedule ~/sch/etacar_raster_keck.sch
- Schedule ended an hour ago, playing with Rx1 He4 HS voltage to keep above 20K. Found that fridge 3,1.5 brings to 22K. Going to amend ~/gcp/antenna/hkconf/K2compact_fast_4K.cfg and run new fridge cycle, if successful will commit. Nevermind. We reverted.
- schedule ~/sch/fridgecycle.sch
- cycled all fridges last night
- Running full CMB schedule to test uMux system. 9_kCMB_smurftest_50_005.sh
- etacar_raster_keck_small.sch
- Another Eta Carina raster, but a more fine raster over
a subset of good detectors. Rx0 at bottom of drum.
- Clear skies.
- All rxs open to sky.
- 1_etacar_raster_keck.sch
- Attempting to extract abs detector pointings by rastering
whole FPU over Eta Carina (CarNeb in source catalog).
- Poor weather. Overcast, high-ceiling clouds for whole schedule.
- Rx012 open, Rx34 blanked off
- 1_knoise_responsivity_10_001.sch
- Noise vs bias, bias points 5000 down to 200 in 100 DAC unit steps
- Rx014 open, Rx23 blanked off
- Begun around 4:30PM local. LMR is turned up today.
- For some reason lasttune on band 3 failed, so this is mostly band 2.
- Aborted 08:00:43. Realized that the mount was locked out.
- 1_knoise_responsivity_10_002.sch
- Aborted 08:41:00. Rx1 is slow to start acquisition, we were missing elnods.
- Increased wait after mce_start_acq to 60s to accomodate while we track this down.
- 9_kCMB_smurftest_50_004.sch
- Similar test schedule as before, but Rx014 open, Rx23 still blanked off
- Last time apparently forgot to start the other 4 masd's, which is awkward.
- Started via autoqueue successfully
- 9_kCMB_smurftest_50_003.sch
- This is a test schedule with Rx1 open to the sky, the other 4 with blanking plates.
- Runs for phase B only, then cycles the fridge. Checking to see whether we can stay tracking for the entire phase.
- Autoqueue was unhappy for some reason, so started manually
- cyclefridge enable=2, on all rx
- 9_kCMB_smurftest_50_001.sch
- This is a test schedule where Rx1 masd is receiving smurf fake data
- Missed the first scanset of phase B because we started late
- Abort schedule to proceed with Rx1 removal at 181124 00:01
- cyclefridge enable=2, on all rx
- stopped mount, locked it out. Observing done for this season
- cyclefridge enable=2, on all rx
- cyclefridge enable=2, on all rx
- stopped CMB observations
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_382.sch
- /home/keck/sch/runend.sch
- weather: thin high clouds, blowing snow
- windows and baffles: windows clear, quite some snow in and on the baffles
- cyclefridge enable=2, on all rx
- He leak, B high this time, swapped for last spare
- NO MORE SPARE LINES
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_381.sch
- /home/keck/sch/runend.sch
- weather: a bit hazym, thin high clouds
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_380.sch
- /home/keck/sch/runend.sch
- weather: clear, thin clouds
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- recharged comp 3
- el current drifting apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_379.sch
- /home/keck/sch/runend.sch
- weather: clear, some thin clouds, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_378.sch
- 181031 08:21:26 rx1 is cold and MCE1 and masd1 turned back on
- mediator stopped
- restarted gcp, masd
- 181031 08:25:10 Starting schedule: /home/keck/sch/mce_autotune.sch
- 181031 08:26:59 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_378.sch
- 181101 14:35 masd0 stopped
- restarted masd0, didn't do anything, rebooted keck33
- rx1 warmed up a bit early
- /home/keck/sch/runend1.sch
- weather: mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 2, valve is very dodgy, only needs about 3 degrees to fully charge
- after charging it continued to leak He into comp and shut off due to high He
- stopped cycle on rx1, and let it cool down
- started new cycle on rx1, will be a few scansets late
- run started late due to problems with fridge cycle, see below
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_377.sch
- massive He leak in D high (rx3) swapped to spare line
- /home/keck/sch/runend.sch
- weather: thin clouds, mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- 181028 23:57:37 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- 181029 01:25:22 Exiting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- was quite tough, about half of the stars I could only see on the monitor not the frame grabber
- abnormal fridge cycle on all rx, except rx1, maybe due to starpointing
- aborted cycle on all, except rx1
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_376.sch
- 181028 04:26 mediator stopped
- restarted gcp, masd
- pmac was throwing an exeception, restarted keck31
- restarted gcp, masd
- 181028 05:30:29 Starting schedule: /home/keck/sch/mce_autotune.sch
- 181028 05:32:18 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_376.sch
- /home/keck/sch/runend.sch
- weather: partly cloudy, high clouds, overcast, clearing
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_375.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, blowing snow, partly cloudy
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_374.sch
- /home/keck/sch/runend.sch
- weather: hazy, thin clouds
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- replaced bad line with an old spare
- el current drifting apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_373.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, hazy
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_372.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, overcast
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_371.sch
- 181018 08:45 massive leak in A high (rx0) swapped for installed spare line
- brief warm up of rx0 just over 300mK
- /home/keck/sch/runend.sch
- weather: overcast, thin high clouds
- windows and baffles: windows clear, lots of snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 4
- replaced faulty line with new spare
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_370.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, clear, overcast
- windows and baffles: windows clear, very little snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 1, 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_369.sch
- massive He leak in C high, slight warming of FPU on rx2
- swapped to spare line
- /home/keck/sch/runend.sch
- weather: overcast, clear, thin clouds
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_368.sch
- 181012 00:45:38 suspend_schedule
- az-diff jump, replaced A4 readhead roller
- 181012 01:53:54 resume_schedule
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, warm
- windows and baffles: windows clear, a lot of snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_367.sch
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, warm
- windows and baffles: windows clear, tons of snow in the baffles
- cyclefridge enable=2, on all rx
- replaced bad he line with new spare, used all 12 new lines
- adjusted readhead A1
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_366.sch
- small az-diff jump, rehomed, data are good until jump and after resume
- 181008 14:05:54 resume_schedule
- /home/keck/sch/runend.sch
- weather: hazy, overcast, blowing snow, warm
- windows and baffles: windows clear, some snow in the baffles
- cyclefridge enable=2, on all rx
- He leak in B low, replaced with spare line
- this was one of the original 2014 lines
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_365.sch
- /home/keck/sch/runend.sch
- weather: overcast, hazy
- windows and baffles: windows clear, some snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_364.sch
- /home/keck/sch/runend.sch
- weather: overcast, clearing, clear, overcast
- windows and baffles: windows clear, little bit of snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 5
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_363.sch
- /home/keck/sch/runend.sch
- weather: overcast, clear, overcast
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_362.sch
- /home/keck/sch/runend.sch
- weather: overcast
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_361.sch
- /home/keck/sch/runend.sch
- weather: overcast,clear, overcast
- windows and baffles: windows with a 3 inch center patch of snow, lots of snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_360.sch
- mediator stopped
- restarted gcp/masd
- 180925 11:10:28 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180925 11:12:18 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_360.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, overcast
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_359.sch
- mediator stopped
- restarted gcp/masd
- 180923 10:36:00 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180923 10:37:50 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_359.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, hazy, blowing snow, thin clouds
- windows and baffles: windows clear, snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2
- /data/keckdaq/autoqueue/pending/9_kCMB_50_358.sch
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clearing
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_357.sch
- /home/keck/sch/runend.sch
- weather: clear, blowing snow, hazy
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_356.sch
- 180918 22:20 fan belt in airhandler broke, all compressors shut off
- replaced fan belt
- all rx cooling down again
- 180918 23:32:04 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180918 23:33:53 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_356.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_355.sch
- /home/keck/sch/runend.sch
- weather: clear above
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- fridge cycle nominal again, rx0 is behaving normal again
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_354.sch
- rx0 not totally cooling down, although UC is at 260mK
- after several hours FPU rx0 is sitll at 322mK, UC at 260mK
- powering mce0 off, rx0 temperature drops slowly
- 180914 00:20:29 rx0 cooled down to below 300mK
- started masd0
- /home/keck/sch/runend.sch
- weather: mostly clear, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- 180913 10:22:16 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- 180913 12:02:34 Exiting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- pmac threw exeption when using slew command !?
- restarted gcp masd
- keck33 unresponsive, restarted all kecks
- tracker window didn't update pmac data
- rebooted keck31
- accidentely started another fridgecycle, aborted schedules, stopped cycle
- 4Ks warmed up quickly
- restarted GCP and masd
- pmac through exception, after another GCP restart, pmac is behaving fine again
- blew IC and UC, therefore starting another fridgecycle
- cyclefridge enable=2, on all rx
- bit of a unusual fridgecycle, rx=0 was not the first to finish
- and rx2 was the slowest, although He pressures are good!?
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_353.sch
- /home/keck/sch/runend.sch
- weather:mostly clear, thin clouds, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- I did not start runend and fridgecycle in time, my fault, sorry !!
- therefore run 353 will start late
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_352.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_351.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_350.sch
- /home/keck/sch/runend.sch
- weather: clear, cold, mostly clear
- windows and baffles: windows clear, some snow on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_349.sch
- mediator stopped
- restarted gcp/masd
- 180904 08:49:25 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180904 08:51:15 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_349.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_348.sch
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clearing, clear
- windows and baffles: windows clear, quite some snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_347.sch
- /home/keck/sch/runend.sch
- weather: hazy, mostly clear, clear, getting windy, blowing snow, overcast
- windows and baffles: windows clear, ton of snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2, 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_346.sch
- 180828 15:28 small az-diff jump over 30k, suspend schedule, could not see anything wrong
- 180828 15:41:57 resume_schedule
- 180828 16:47 az-diff jump, readjusted readhead 2A
- 180828 17:04:42 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear, mostly clear, hazy
- windows and baffles: windows clear, quite some snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_345.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_344.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- 180824 05:34:21 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 180824 09:30:53 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- swapped bad He-line for new spare
- /home/keck/sch/mce_autotune.sch
- keck 33 froze restarted keck33 and masd
- /data/keckdaq/autoqueue/pending/9_kCMB_50_343.sch
- /home/keck/sch/runend.sch
- weather: hazy,, mostly clear
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_342.sch
- /home/keck/sch/runend.sch
- weather: very hazy, thin clouds, hazy
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- 180820 04:44:43 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 180820 04:50:44 abort_schedule, too hazy
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_341.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, little hazy
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- leak in E low, replaced with spare line
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_340.sch
- mediator stopped
- restarted gcp/masd
- 180817 07:52:45 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180817 07:54:35 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_340.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 5, possible leak
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_339.sch
- 180815 18:40 masd0 stopped, restarted keck33 and masd0
- /home/keck/sch/runend.sch
- weather: hazy, thin clouds, mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- replaced bad line with new spare line
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_338.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, high winds
- windows and baffles: windows clear, some snow on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2
- leak in A high, replaced with spare
- that is the first of the new lines going bad, was in for 5 months
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_337.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, high winds
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- readjusted readhead 3A
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_336.sch
- az diff jumps, some problems with readhead 3A
- reject data once az gets over 30k until resume schedule as follows
- 180809 10:17:26 resume_schedule
- 180809 12:27:20 resume_schedule
- 180809 20:10:51 resume_schedule
- /home/keck/sch/runend.sch
- weather: mostly clear, quite hazy
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_335.sch
- /home/keck/sch/runend.sch
- weather: cloudy, blowing snow, clearing
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_334.sch
- /home/keck/sch/runend.sch
- weather: hazy, thin clouds, blowing snow
- windows and baffles: windows clear, some snow on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_333.sch
- /home/keck/sch/runend.sch
- weather: little hazy, blowing snow, mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_332.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, hazy, blowing snow
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 3, 5
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_331.sch
- el current drifting apart
- /home/keck/sch/runend.sch
- weather: mostly clear, hazy, clearing
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_330.sch
- mediator stopped
- restarted gcp/masd
- 180728 15:09:55 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180728 15:11:45 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_330.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, clearing
- windows and baffles: windows clear, barely any snow in the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_329.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, mostly clear
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_328.sch
- problems with masd1, keck34, turns out disk space on keck34/data was full
- 180723 16:06:59 abort_schedule
- 180723 16:07:23 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180723 16:09:12 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_328.sch
- all kecks are happy
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow
- windows and baffles: windows clear, quite some snow in the baffles
- cyclefridge enable=2, on all rx
- problems starting new cmb, schedule will quite because of MCE reconfiguration failed!
- restarted sync box and all keck
- later runstart since I was trying to fixc pmac issue
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_327.sch
- many more pmac failures
- mediator stopped
- restarted gcp/masd
- 180721 23:17:41 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180721 23:19:31 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_327.sch
- el current drifting apart
- open the loops with "k" didn't work
- masd1 stopped
- restarted keck34
- masd1 was a bit slow, after every scan start and would trip the pager
- disabled pager
- looks like rx1 wasn't recording from examiner plots
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- pmac giving ERR012
- cold reboot of all keck computers
- cyclefridge enable=2, on all rx
- 180721 06:07:51 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 180721 10:01:58 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- pmac is behaving strangly, checked all connections in keck31 and hand controller, but still
- problems
- installed pmac spare, but that one doesn't work
- swapped card several times but always same result, spare doesn't work, current card gives problems
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_326.sch
- 180720 01:07:36 pmac stopped !??
- mulitple pmac stops
- rebooted keck31
- 180720 09:28 three power outages
- mediator stopped
- restarted gcp/masd
- 180720 14:17:57 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180720 14:20:02 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_326.sch
- /home/keck/sch/runend.sch
- pmac stopped again
- aborted run about 1h before acutal runend to work on pmac
- weather: clear, very hazy, mostly clear, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_325.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, blowing snow
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- installed new az He line
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_324.sch
- 180716 11:48:43 suspend_schedule
- az-diff jump, just above 30k, readjusted readhead 1A
- 180716 12:00:06 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear, mostly clear, blowing snow
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2, 3, 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_323.sch
- /home/keck/sch/runend.sch
- problems with signalhound1
- weather: very hazy<, clearing, clear/li>
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- leak in D high
- replaced faulty line with spare
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_322.sch
- /home/keck/sch/runend.sch
- weather: clear, blowing snow, very hazy
- windows and baffles: windows clear, quite some snow in and on the baffles
- cyclefridge enable=2, on all rx
- replaced bad He line with new spare
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_321.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged rx2, high side was still at 287psi, but possible leak,
- slight warm up 13h before runend
- readheads look good, freak az-diff jump coudn't be reproduced
- replaced C low with spare line
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_320.sch
- huge az-diff jump on the last scans of last scanset
- let run finish
- furnace quite in MAPO, got just below freezing downstairs
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_319.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, clearing, getting cold, very clear
- windows and baffles: windows clear, quite a bit of snow on and in the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2, 5
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_318.sch
- 180704 04:39:52 suspend_schedule
- az-diff jump, readjusted readhead A2
- 180704 05:09:07 resume_schedule
- schedule didn't pick up at the next scan set !?
- 180704 05:27:14 abort_schedule
- 180704 05:27:23 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_318.sch
- mediator stopped
- restarted gcp/masd
- since there were only a few minutes left until runend, started fridgcycle right away
- weather: very hazy, clearing, clear, hazy, wind picking up
- windows and baffles: windows clear, ton of snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_317.sch
- /home/keck/sch/runend.sch
- weather: clear, very hazy, wind picking up
- windows and baffles: windows 3in snow patch in center, lots of snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_316.sch
- mediator stopped
- restarted gcp/masd
- 180630 05:53:42 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180630 05:56:33 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_316.sch
- mediator stopped
- restarted gcp/masd
- 180701 07:30:23 abort_schedule
- weather: clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 3
- but still no leak could be found
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_315.sch
- 180628 23:05 masd2 stopped, pager initiated
- came back after reboot of keck35
- /home/keck/sch/runend.sch
- weather: haze, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- cyclefridge enable=2, on all rx
- recharged comp 2,3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_313.sch
- mediator stopped
- restarted gcp/masd
- 180625 04:08:35 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180625 04:10:26 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_313.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- 180623 09:46:46 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 180623 13:20:43 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_312.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- replaced bad line with new spare, no pressure loss in comp 3 over the past 2 days ??
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_311.sch
- /home/keck/sch/runend.sch
- weather: clearing clear
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- replaced D low with spare line
- there is still a leak in compressor 3, but couldn't locate it yet
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_310.sch
- mediator stopped
- restarted gcp/masd
- 180619 03:44:08 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180619 03:45:58 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_310.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, high winds
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- recharged comp 4
- possible leaks in comp 3 and 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_309.sch
- /home/keck/sch/runend.sch
- weather: very hazy, blowing snow, high winds
- windows and baffles: windows clear, LOTs of snow in the baffles
- cyclefridge enable=2, on all rx
- replaced bad az line with new spare
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_308.sch
- /home/keck/sch/runend.sch
- weather: hazy
- windows and baffles: windows clear, little snow in and on the baffles
- cyclefridge enable=2, on all rx
- replaced big fan in drive amp cabinet
- el current drifting apart
- recharged comp 3, 4, 5
- massive leak in C high, must developed during fridgecycle, psi check showed still normal pressure
- rx2 is very sensitive to under pressure, even 277psi on the high side made the cycle to fail
- swapped C high for spare line
- will miss first 2 scansets
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_307.sch
- mediator stopped
- restarted gcp/masd
- 180613 04:12:29 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180613 08:20:36 moving /data/keckdaq/autoqueue/pending/9_kCMB_50_307.sch to /data/keckdaq/autoqueue/done/9_kCMB_50_307.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, wind easing a bit
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_306.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_305.sch
- /home/keck/sch/runend.sch
- weather: high winds, blowing snow, overcast, hazy - best weather in days
- windows and baffles: windows clear, quite some snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_304.sch
- /home/keck/sch/runend.sch
- weather: very hazy, blowing snow, high winds, overcast
- windows and baffles: windows clear, quite some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_303.sch
- mediator stopped
- restarted gcp/masd
- 180603 21:04:11 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180603 21:06:00 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_303.sch
- /home/keck/sch/runend.sch
- weather: haze, blowing snow, high winds
- windows and baffles: windows clear, quite some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_302.sch
- /home/keck/sch/runend.sch
- weather: haze, high winds, blowing snow, storm, clearing
- windows and baffles: windows clear, lots of snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_301.sch
- mediator stopped
- restarted gcp/masd
- 180601 02:22:02 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180601 02:24:08 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_301.sch
- /home/keck/sch/runend.sch
- weather: clear, haze, wind picking up, blowing snow
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2, 3, 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_300.sch
- mediator stopped
- restarted gcp/masd
- 180529 02:11:49 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180529 02:13:38 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_300.sch
- /home/keck/sch/runend.sch
- this time rebooting all kecks didn't work and we still had mediator crashes, trying again
- rebooting all kecks, restarted gcp and masd
- weather: thin clouds, very hazy, clear
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_299.sch
- mediator stopped
- restarted gcp/masd
- 180527 02:07:30 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180527 02:09:19 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_299.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, wind picking up
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- swapped A low for spare line, slow leak
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_298.sch
- 180525 19:59 masd4 stopped, restarted keck37 and masd4 came back after a few scansets
- mediator stopped
- restarted gcp/masd
- 180526 03:28:24 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180526 03:30:13 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_298.sch
- /home/keck/sch/runend.sch
- weather: clear, mostly clear overhead, wind picking up
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- swapped E High for spare line
- 180524 11:16:47 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 180524 14:43:36 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_297.sch
- mediator stopped
- restarted gcp/masd
- 180523 03:36:28 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180523 03:38:18 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_297.sch
- mediator stopped
- restarted gcp/masd
- 180524 05:31:02 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180524 05:32:52 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_297.sch
- /home/keck/sch/runend.sch
- rebooted all keck computers, see if that helps with the mediator crashes
- weather: blowing snow, very hazy, clearing, clear overhead
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- recharged comp 3
- might be also a small leak
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_296.sch
- az diff jump
- 180520 22:18:46 resume_schedule
- /home/keck/sch/runend.sch
- weather: blowing snow, very hazy
- windows and baffles: windows clear, lots of snow in the baffles
- cyclefridge enable=2, on all rx
- recharged comp 5
- slow leak in comp 5
- el current drifting apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_295.sch
- mediator stopped
- restarted gcp/masd
- 180520 01:33:05 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180520 01:34:54 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_295.sch
- /home/keck/sch/runend.sch
- weather: blowing snow, hazy
- windows and baffles: windows clear, quite a bit of snow on the baffles
- cyclefridge enable=2, on all rx
- keck32 /data filled up as aftermath from the omega0/data crash
- even the crontab purge data should only leave 12 days there, for some reason that didn't work and
- there were still older files filling the disk, which I deleted by hand,
- since the disk was full we missing part of last run
- therefore the examiner plots don't show up for this run because it takes the start of the fridgecyle to end it
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_294.sch
- mediator stopped
- restarted gcp/masd
- 180517 02:49:27 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180517 02:51:16 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_294.sch
- /home/keck/sch/runend.sch
- weather: clearing, not for long :(, blowing snow, warm overcast, haze
- windows and baffles: windows clear, quite some snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_293.sch
- mediator stopped
- restarted gcp/masd
- 180516 01:14:36 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180516 01:16:28 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_293.sch
- /home/keck/sch/runend.sch
- weather: warm, blowing snow, haze, overcast, clearing to the end
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2, 5
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_292.sch
- /home/keck/sch/runend.sch
- weather: haze and blowing snow, very warm, totally overcast
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_291.sch
- mediator stopped
- restarted gcp/masd
- 180511 03:03:05 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180511 03:04:55 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_291.sch
- /home/keck/sch/runend.sch
- weather: haze and blowing snow, very warm
- windows and baffles: windows clear, little bit of snow in the baffles
- cyclefridge enable=2, on all rx
- omega0/data working again, all data caught up
- examiner plots working again as well
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_290.sch
- rx0 FPU temp went up at runstart to the normal higher temperature BUT stayed up
- not the normal drop quickly back below 300mK, it is cooling down slowly
- rx0 staying above 300mK strange behavior, since UC is cold !??
- new /data on omega0 is in place, files getting transfered to spfs
- rx0 FPU still around 326mK, tried again to restart keck33 and masd0
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, clearing, hazy, blowing snow again, warm
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- restarted keck33 and masd0
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_289.sch
- masd0 stopped at the end of the run
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow
- windows and baffles: windows clear some snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 5
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_288.sch
- problems with omega0 disk array, Clem got it running for a couple of hours
- but than it died again
- therefore no data, examiner etc.
- /home/keck/sch/runend.sch
- weather: little hazy, blowing snow, very hazy
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_287.sch
- /home/keck/sch/runend.sch
- weather: clear overhead, cold, warming up, haze, blowing snow
- windows and baffles: windows clear, some snow in the baffles
- cyclefridge enable=2, on all rx
- el currents drifting apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_286.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, cold
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- swapped bad line for new spare
- recharged comp 2
- problems with pamc handcontroller, ribbon cable came lose
- shutdown keck31 to work on it, therefore had to restart fridgecycle
- 180430 12:14:19 Starting schedule: /home/keck/sch/fridgecycle.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_285.sch
- /home/keck/sch/runend.sch
- weather: clear, mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_284.sch
- /home/keck/sch/runend.sch
- weather: hazy, claer
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 3, 4
- possible leak comp 3
- swapped A high for spare line
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_283.sch
- /home/keck/sch/runend.sch
- weather: partly cloudy, haze
- windows and baffles: windows clear, little snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 5
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_282.sch
- aborted run, new bias not loaded yet
- 180422 17:55:38 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180422 17:57:28 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_282.sch
- new bias for rx4
- /home/keck/sch/runend.sch
- weather: clear, partly cloudy, haze
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- 180422 14:09:15 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 180422 17:48:14 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_281.sch
- /home/keck/sch/runend.sch
- weather: thins clouds, blowing snow, clearing
- windows and baffles: windows clear, little snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_280.sch
- /home/keck/sch/runend.sch
- weather: clear, thin clouds, haze, blowing snow
- windows and baffles: windows clear, quite some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_279.sch
- /home/keck/sch/runend.sch
- weather: clear, overcast, clearing
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_278.sch
- running without rx1
- 180415 03:00 rx1 is cold again and will be included
- mediator crashed
- restarted gcp/masd
- this time I actually saw the crash live and I new it would crash, values alternated in quick succession with actual values
- and "0" for some values, pmac would show "running", "stopped", "running"... the rate was about 4Hz
- 180415 03:17:19 schedule /home/keck/sch/mce_autotune.sch
- 180415 03:21:00 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_278.sch
- /home/keck/sch/runend.sch
- restarted keck32, to see if that fixes pager problem
- also rebooted keck31 and the other keck computers
- diskcheck after reboot on keck32 and keck31 nearly took one hour
- restarted gcp/masd
- weather: overcast, wind picking up, clearing, clear
- windows and baffles: windows clear, little snow in the baffles
- cyclefridge enable=2, on all rx
- massive He leak on rx1, fridgecycle didn't finish, changed to spare line
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_277.sch
- mediator crashed
- restarted gcp/masd
- 180413 01:05:00 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180413 01:06:50 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_277.sch
- /home/keck/sch/runend.sch
- weather: clear, getting overcast, wind picking up
- windows and baffles: windows clear, some snow on and in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_276.sch
- my screw up, didn't put new schedule in pending
- 180411 00:05:20 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_276.sch
- but pager didn't go off either, experimenting with pager to see how that can be prevented
- /home/keck/sch/runend.sch
- weather: mostly clear, clear, getting cold
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_275.sch
- mediator crashed
- restarted gcp/masd
- 180409 10:41:52 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180409 10:43:43 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_275.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- 180408 15:10:29 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- 180408 17:26:57 Exiting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_274.sch
- mediator crashed
- restarted gcp/masd
- 180407 03:19:40 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180407 03:21:31 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_274.sch
- /home/keck/sch/runend.sch
- weather: overcast, clearing, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_273.sch
- /home/keck/sch/runend.sch
- restarted gcp/masd, pointing prolbem is fixed
- weather: thin clouds, overcast
- windows and baffles: very little snow on the windows, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2,4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_272.sch
- 180404 04:00 wifi and bluetooth on singnalhound laptop disabled
- /home/keck/sch/runend.sch
- weather: clear, clouds moving in
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- tried star pointing, but telescope won't slew to correct coordinates??
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_271.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 5
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_270.sch
- /home/keck/sch/runend.sch
- restarted gcp/masd to get ephem working properly
- weather: mostly clear, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_269.sch
- /home/keck/sch/runend.sch
- weather: thin clouds
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_268.sch
- /home/keck/sch/runend.sch
- stopped gcp/masd
- reverted to gcp version from yr7
- restarted gcp/masd
- weather: mostly clear overhead, some thin clouds
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_267.sch
- 180324 01:36:42 abort_schedule
- to commit change of gcp back to 2017 version, weather is bad anyway
- controlSystem won't start properly, going back to year8 version
- 180324 02:40:34 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180324 02:42:24 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_267.sch
- /home/keck/sch/runend.sch
- weather: overcast, high winds, blowing snow, clearing, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 2,3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_266.sch
- gcp stopped, mediator ?? different from last years mediator crashes
- restarted gcp/masd
- 180322 02:31:13 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180322 02:33:02 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_266.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, overcast, windy, blowing snow
- windows and baffles: windows clear, some snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_265.sch
- 180319 22:35 brief power outage
- el current drifting apart
- 180320 14:15:15 Exiting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_265.sch ??????????????????
- restarted gcp/masd, otherwise keckviewer wasn't running properly
- rx1 warming up slightly
- 180320 14:39:21 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180320 14:41:11 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_265.sch
- mediator stopped, different from normal
- restarted gcp/masd
- 180321 02:40:05 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_265.sch
- /home/keck/sch/runend1.sch
- weather: mostly clear overhead, wind picking up
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- 180319 15:38:06 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- 180319 17:58:27 Exiting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_264.sch
- mediator stopped
- restarted gcp/masd
- 180319 02:00:59 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180319 02:02:48 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_264.sch
- /home/keck/sch/runend.sch
- weather: totally overcast, windy, clearing
- windows and baffles: windows clear, some snow in the baffles
- cyclefridge enable=2, on all rx
- el currents drifting apart
- bicep spare variac had reversed polarity, therefore breaker triped, used it now for spares
- for our variac
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_024.sch
- el currents drifting apart
- 180316 01:57:35 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_263.sch
- /home/keck/sch/runend.sch
- weather: clear, windy, totally overcast
- windows and baffles: very little snow on the windows, lots of snow in and on the baffles
- cyclefridge enable=2, on all rx
- installed new spare az line
- el currents drifting apart
- disconnected all baffle temperature sensors, far fetched idea, but these are the only sensors that are
- not used during calibration when we don't have frequent mediator crashes
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_262.sch
- run stopped ?? pager couldn't be turned off until restart of gcp, masd
- keckviewer was still in downsample 1
- 180314 07:33:47 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180314 07:35:46 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_262.sch
- mediator crashed
- 180315 08:59:17 abort_schedule
- restarted gcp/masd
- 180315 09:01:13 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180315 09:03:16 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_262.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- one variac broke, carbon brush broke off
- windows and baffles: windows clear, little snow in the baffles
- cyclefridge enable=2, on all rx
- 180313 17:19:21 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- missing too many stars, aborted star pointing
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_261.sch
- He leak in D high line, rx3 warmed up
- accidently stopped gcp, restarted gcp and masd
- 180312 18:43:16 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180312 18:45:06 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_261.sch
- swapped D high for spare line
- /home/keck/sch/runend3.sch
- weather: overcast, blowing snow, clearing, mostly clear
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_260.sch
- mediator crashed :( no pager alarm
- 180310 02:05:56 abort_schedule
- restarted gcp and masd
- 180310 02:07:32 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180310 02:09:27 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_260.sch
- /home/keck/sch/runend.sch
- weather: clearing, overcast, blowing snow
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- 180309 15:30:44 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- aborted star pointing, missing too many stars
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_259.sch
- keckViewer was unresponsive, didn't look like the normal mediator crash AND and I got a page
- restarted gcp and masd
- 180308 17:33:32 Starting schedule: /home/keck/sch/mce_autotune.sch
- 180308 17:35:21 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_259.sch
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clearing
- windows and baffles: windows clear, some snow in and on the baffles
- removed mirror frame and installed forebaffles
- getting telescope ready for first cmb
- recharged comp 2
- cyclefridge enable=2, on all rx
- keckviewer showed "0" on all entries after starting fridgecycle??? mediator was running
- restarted gcp and masd
- 180307 11:25:34 Starting schedule: /home/keck/sch/fridgecycle.sch
CMB 2018
- cyclefridge enable=2, on all rx
- tried star pointing, but thin clouds
- cyclefridge enable=2, on all rx
- mediator crashed, after the cycle, didn't restarted until I was back out at MAPO, since the telescope was idle anyway
- restarted gcp and masd
- 180306 04:45 mirror is removed, telescope is cooling back down, all well
- warm up of FPUs from 12K to 19K
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_014.sch
- weather: thin clouds
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_014.sch
- weather: thin clouds
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_014.sch
- weather: thin clouds
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_014.sch
- /home/keck/sch/runend.sch
- weather: thin clouds
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_014.sch
- weather: slightly overcast
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_014.sch
- weather: overcast
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_014.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_014.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_014.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_014.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_013.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_013.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_013.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_013.sch
- weather: clear, blowing snow
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_013.sch
- weather: clear, blowing snow
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_013.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_013.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_013.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_013.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_013.sch
- 180221 01:37:00 abort_schedule
- did a sign mistake while adjusting the front bottom ones, we went to 25.75" instead of 21"
- so aborted the run and corrected this
- 180221 01:53:02 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_013.sch
- weather: clear
- cyclefridge enable=2, on all rx
- moved mirror to the back postion
- becaus of block mix up we meassured the current values
- front bottom: should have been at 15" was at 12.75" so -2.25"
- front top: should have been at 55.5" was at 52" (both were about 1" different 52 is the middle value) so -3.5"
- back: should have been at 29" was at 30.75" so + 1.75"
- after adjustment to "back" postion
- front bottom: should have been at 23.5" -2.25" so is now at 21.25" (originally did a mistake here, see above)
- front top: should have been at 57.5" -3.5" so is now at 54"
- back: should have been at 25.2" +1.75 so is now at 27"
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_012.sch
- weather: clear
- cyclefridge enable=2, on all rx
- recharged comp2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_012.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_012.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_012.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_012.sch
- weather: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_012.sch
- weather: clearing, wind easing
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_012.sch
- weather: overcast, blowing snow
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_012.sch
- weather: clearing, getting overcast again, wind picking up
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_012.sch
- weather: overcast, blowing snow
Winter 2018
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_012.sch
- weather: overcast, blowing snow
- windows and baffles:
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_011.sch
- weather: overcast, blowing snow
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_011.sch
- weather: fine up to now, but winds picking up
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_011.sch
- weather: fine, mostly clear skies
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_011.sch
- weather: fine, mostly clear skies
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_011.sch
- weather: fine, mostly clear skies
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_011.sch
- weather: fine, mostly clear skies
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_011.sch
- cyclefridge enable=2, on all rx
- pmac stopped
- /home/keck/sch/mce_autotune.sch
- data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_011.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_011.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_011.sch
- repeat the previous schedule.
- forwardest mirror position. (for real this time)
- we adjust the CF legs to account for the clamp block swaps.
- front top goes up by 1.75 inch and front bottom goes down by 1.75 inch.
- chopper ref connected to optical fiber
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_010.sch
- forwardest mirror position.
- DSL chopper up. First FFBM with 16Hz chopper.
- Forgot to plug in optical chop ref, so will have to redo this schedule.
- El motor current diverges.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_010.sch
- repeat the schedule with the mediator crash.
- after this we'll put the chopper up DSL mast and start regular FFBM.
- forwardest mirror position.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_010.sch
- forwardest mirror position.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_010.sch
- forwardest mirror position.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_009.sch
- forwardest mirror position.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_009.sch
- forwardest mirror position.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_009.sch
- forwardest mirror position.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_009.sch
- forwardest mirror position.
- Forgot to change the schedule name to 010.
- Mediator crash near the end of the schedule.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_009.sch
- forwardest mirror position.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_009.sch
- forwardest mirror position.
- rx1 fridge ran out 1 hour into the schedule.
- gcp crashed during last fridge cycle, and we only did a single cycle afterwards on rx1.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_009.sch
- forwardest mirror position.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_009.sch
- First schedule with forwardest mirror position.
- First half of data might be affected by ARIANNA wifi signal.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_010.sch
- change the days of data kept on Keck32 from 10days to 3days. (/home/keckdata/bin/purge_data.pl)
- Redo schedule j. All 10 schedules done. Time to move mirror from back position to forward or forwardest.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_010.sch
- Deleted some data from Keck32:/data/keckdaq/arc/.
- Redo schedule i.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_009.sch
- run out of disk space. Have to redo this schedule and maybe the previous one.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_009.sch
- Keck32 run out of /data disk space? Error in log file.
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_008.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_008.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_008.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_009.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_008.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_008.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_008.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_008.sch
- First ffbm schedule with broadband noise source.
- Fridge might have run out early for some rxs. (rx0, rx3)
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_023.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- K5 HK backpack now has capacitors
- Raw data: rx4_hk_014
- Discard 1_mirror_noise_1_024.sch
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_021.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- K5 HK backpack out for a couple hours now
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_019.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- All HK cables plugged back in.
- Taken raw data at 50 MHz through MCE. keck37:/home/keck/raw/data_1_mirror_noise_1_019
- Taken data through $ mce_run 1_mirror_noise_1_019_001 21645 s
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_018.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- All HK (for all rxs) power and digital cables disconnected.
- Taken raw data at 50 MHz through MCE. keck37:/home/keck/raw/data_1_mirror_noise_1_018
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_017.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- All HK connected
- Taken raw data at 50 MHz through MCE. keck37:/home/keck/raw/data_1_mirror_noise_1_017
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_016.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- K5 HK power cable, digital cable disconnected. MDM-100 disconnected.
- Taken raw data at 50 MHz through MCE. keck37:/home/keck/raw/data_1_mirror_noise_1_016
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_015.sch
- Ignore 1_mirror_noise_1_011.sch - Ignore 1_mirror_noise_1_014.sch.
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- K5 HK fully connected.
- Taken raw data at 50 MHz through MCE. keck37:/home/keck/raw/data_1_mirror_noise_1_015
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_010.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- Removed all K5 HK cables (power + A19 + A20 + digital cable)
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_009.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- All HK on. Placed ferrite bead on K5 HK digital cable.
- Did not start the first time copied to /data/keckdaq/autoqueue/pending/
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_008.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- All HK connected back. Waited for temperature to settle. This is more of a consistency check measurement.
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_007.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- K5 HK, A19 and A20 cables are disconnected. Power and digital cable still on.
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_006.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- HK is on.
- rx4 experiment.cfg: back to original, row_len = 60; sample_dly = 50; sample_num = 10;
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_005.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- HK is on.
- rx4 experiment.cfg: row_len = 60; sample_dly = 54; sample_num = 6;
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_004.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- HK is on.
- rx4 experiment.cfg: row_len = 60; sample_dly = 48; sample_num = 12;
- Did not start the first time copied to /data/keckdaq/autoqueue/pending/
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_003.sch
- All rx staring at blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- HK is on.
- rx4 experiment.cfg: row_len = 60; sample_dly = 50; sample_num = 10;
- 9_kCMB_50_258.sch
- another test CMB schedule, to see if HK-induced 4 MHz we recently detected is
- ...the source of row-correlated noise.
- first scanset with normal HK operation.
- after trailing elnod and before second scanset, unplugged HK backpack power and HK digital cables UTC 12:15-12:18
- 9_kCMB_50_257.sch
- test CMB schedule -- Justin and Marion to fill in details!!
- 1_knoise_responsivity_9_023.sch
- NET vs bias schedule, beautiful weather
- 1_forebaffle_on_off_material_1_002.sch
- Forebaffle on/off sequence on rx4 (270 GHz)
- Similar sequence and same set of samples as _001.sch schedule below
- 9_kCMB_50_256.sch
- test CMB schedule after reinstalling rx4 (270 GHz)
- Initial scansets used incorrect rx4 SQ tuning (experiment.cfg not updated)
- rx4 also had elevated FPU temp due to PID control problems, tracked to bad heater 3
- mid-schedule, switched PIT for rx4 to clean-side only which solved that problem
- but rx4 TES biases were too low (had been set on mirror, not sky), so most latched
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_002.sch
- Rx0,2,3 staring at zenith at nominal Ti bias, taking 2min each
of combine off data five times. FPUs a little hot at start of schedule,
near ~310mK.
- /data/keckdaq/autoqueue/pending/1_mirror_noise_1_001.sch
- Rx0,2,3 with blanking plate at nominal Ti bias, taking 2min each
of combine off data five times.
- /home/keck/sch/1_forebaffle_on_off_material_1_001.sch
- Repeat of measurements of materials' scattering using forebaffle
on/off comparisons, but based on the
1_forebaffle_on_off_4_010.sch found in the autoqueue/done
directory.
- Sequence is generally:
- Sequence of 5 sec records with forebaffle off, on, off, on,
off. Only using tallest forebaffle.
- Partial loadcurve immediately following with forebaffle
off, then PLC with forebaffle on.
- Extra PLC we chose to ignore (supposed to be with forebaffle
off, but we used it to change out materials).
- In order, measured:
- Two leading elnods
- Zotefoam puck (bonded, from Caltech)
- Reference for Zotefoam measurements (no material)
- Zotefoam stack (4 layers, unbonded, from Caltech)
- Zotefoam puck (bonded, spare at Pole)
- 8.5 icm edge filter
- Reference for edge filter measurements (no material)
- 10.5 icm edge filter
- 5.5 icm edge filter
- Double layer Dyneema membrane
- Reference for Dyneema measurements (no material)
- Raw Dyneema weave membrane
- Single layer Dyneema membrane
- Schedule was written to have more references, so aborted
schedule to manually perform two trailing elnods. Search
for 1_forebaffle_on_off_material_1_001.sch end time will
not contain trailing elnod, but time given at the top
of this entry does include that extra
mini-schedule.
- /home/keck/sch/forebaffle_on_off_material_scattering.sch
- Detectors on Ti transition
- Each material measurement a sequence of 4 measurements.
- Sequence of material-only, material+forebaffle, nothing,
forebaffle-only measurements on rx2 — corresponds to
feature bits 0, 1, 2, and 3, respectively.
- Materials in order:
- Zotefoam window (Keck style), bonded (4 layers of laminates)
- Zotefoam window (Keck style), unbonded
- 8.5 icm edge filter ( + Eccosorb surround)
- 10.5 icm edge filter ( + Eccosorb surround)
- Same non-idealities as previous schedule (minus wooden frame
since no Dyneema materials tested)
- /home/keck/sch/forebaffle_on_off_material_scattering.sch
- Detectors on Ti transition
- Each material measurement a sequence of 4 measurements.
- Sequence of material-only, material+forebaffle, nothing,
forebaffle-only measurements on rx2 — corresponds to
feature bits 0, 1, 2, and 3, respectively.
- Materials in order:
- Single layer laminated Dyneema
- Zotefoam window (Keck style), bonded (4 layers of laminates)
- Raw Dyneema (single layer)
- Two layer laminated Dyneema
- Non-idealities of note:
- Open ground shield
- People on top of mount
- Ladder top visible above top of mount
- Wooden stretcher frame has to pass over cryostat window /
through beams
- Turning off rx4 compressor, putting on turbo, to start warmup
- 171119 22:10:53 Turning on rx4 fridge pumps to force thermal
bridge (based on cooldown instructions, but interpreted in
reverse)
- 171119 22:17:53 Starting fridge cycle on other rxs
- 171121 ~21:00 recharged compressors in stations 2 and 4
- cyclefridge enable=2, on all rx
- recharged compressor 2
- replaced N2 bottle for membranes
- Using this schedule to test out various GCP changes and mediator
behaviors, so expect timing and data consistency to be poor.
- Started late as restarting GCP with new checkout to test
cleaned-up-for-committability of Grantland's patches.
- /home/keck/sch/mce_autotune.sch
- check_rms.py on mce4 = 3.351
- /data/keckdaq/autoqueue/pending/9_kCMB_50_255.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles:
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- check_rms.py on mce4 = 2.82
- /data/keckdaq/autoqueue/pending/9_kCMB_50_254.sch
- El currents diverged, but was away/sleeping. Eventually pmac
program stopped running, but neither caused pager alarms
to sound.
- Added strong (bolded) statement to "Keck CMB and Run End
Procedures" cookbook about watching motor currents at start of
each run.
- 171113 20:54:55 El motor currents started diverging again.
Stopped pmac program, opened servo loops, closed loops, and
restarted pmac program.
- 171113 23:10:16 Starting memory write stressors
Running with 4GB consumed memory (out of 8GB)
top reports ~only 50MB free, but still not swapping
- 171113 23:20:35 ended 4GB test (runtime ~10 minutes)
- 171113 23:24:19 Running at 7GB (out of 8GB)
- Mediator crashed!
- Try no-write, locked-mmap buffers to force memory pressure
without CPU cycles.
- 171114 01:44:00 Starting locked memory test @ 7GB
- mem_locked OOM killed; mediator and control killed/crashed
too
- 171114 03:02:00 Discover that no external programs needed to
induce a mediator stall. To clearly see the entire mediator
stall, try:
- Start the mediator
- Get mediator PID with
ps -ef | grep [k]eckMediator.
- Attach to it with strace:
strace -f -p <PID> -e trace='!write'
- Note that multiple PID/thread ids are listed in the
output
- Now click and hold with a mouse button on the mediator
xterm window; the text will stop scrolling, but if held
long enough, the strace output will also stop on
all threads.
- Release the mouse button. Wait a short bit (order 10
seconds) to see if mediator has stalled; you should see
a long series of futex syscalls in a row.
If not, click and hold longer and repeat.
- Eventually mediator will stall with several "Got an
output frame!" messages showing up last in the window,
which Robert has reported seeing in the past when the
mediator stops.
- weather: clear, mostly clear
- windows and baffles:
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- check_rms.py on mce4 = 2.651
- /data/keckdaq/autoqueue/pending/9_kCMB_50_253.sch
- keck32 has 4 cores; going to do CPU-only stress tests,
incrementally increasing the number of cores which are
used doing computations
- 171112 07:07:34 Starting CPU stress test on keck32 (single
thread) — ran for ~7 minutes
- 171112 07:23:44 Starting CPU stress test on keck32 with
2 threads — ran for ~10 minutes
- 171112 07:33:52 Starting CPU stress test on keck32 with
3 threads — ran for ~10 minutes
- 171112 07:43:20 Starting CPU stress test on keck32 with
4 threads — ran for ~10 minutes
- 4 threads test ocurring during scanset E04
- 171112 07:53:15 End of CPU stress tests on keck32
- /home/keck/sch/runend.sch
- weather: blowing snow, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- refill compressor station 2 (rx1) from HI 283PSI to 287PSI
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_252.sch
- 171110 02:42:59 echo "Pager was activated (by register antenna0.pmac.drive_status[0])"
No faults on drives - pmac program showed as stopped in pmac.page
Doing `b1r` at pmacterm restored motion
- 171110 02:49:14 started rebuild of keck35 RAID
- /home/keck/sch/runend.sch
- weather: blowing snow, lots of blowing snow, still blowing snow
- Snow concentrated in ground shield only on up-wind side, but
enough that environmental boot started to sweep out gouge into
drift
- windows and baffles: windows clear, couple handfulls of snow in
each baffle
- cyclefridge enable=2, on all rx
- 171109 00:48:53 restarted masd2 since clock counter didn't stop
with runend.sch
- 171109 04:27:33 check_rms.py on rx4 returns a value of 2.694
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_251.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, clear, blowing snow
- windows and baffles: light snow in and on baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_250.sch
- /home/keck/sch/runend.sch
- weather: clear overhead, blowing snow, overcast
- windows and baffles: windows clear, some snow in the baffles
- /home/keck/sch/mce_autotune.sch
- check_rms.py 3.404
- removed HK power on rx4, removed connectors, reseated connectors, turned power back on
- /home/keck/sch/mce_autotune.sch
- check_rms.py 2.688
- cyclefridge enable=2, on all rx
- recharged comp 2,3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_249.sch
- pmac stopped
- mediator stopped
- 171104 10:38:31 Starting schedule: /home/keck/sch/mce_autotune.sch
- 171104 10:40:21 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_249.sch
- /home/keck/sch/runend.sch
- weather: clear, clear overhead, blowing snow
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged compressor 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_248.sch
- pmac stopped
- mediator stopped
- restarted gcp and masd
- 171101 10:10:23 Starting schedule: /home/keck/sch/mce_autotune.sch
- 171101 10:12:12 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_248.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- swapped mce4 and mce1 back to original positions
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_247.sch
- mediator stopped
- restarted gcp and masd
- 171030 19:43:11 Starting schedule: /home/keck/sch/mce_autotune.sch
- 171030 19:45:01 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_247.sch
- /home/keck/sch/runend.sch
- weather: clear, clear overhead, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- 171030 02:30:08 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- 171030 04:32:30 Exiting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_246.sch
- 171029 01:47:40 masd2 stopped
- restarted keck35, masd2
- mediator stopped
- restarted gcp and masd
- 171029 06:42:16 Starting schedule: /home/keck/sch/mce_autotune.sch
- 171029 06:46:25 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_246.sch
- masd2 not working again
- had to restart keck35 again
- mediator stopped
- restarted gcp and masd
- 171029 10:25:53 Starting schedule: /home/keck/sch/mce_autotune.sch
- masd2 not working, disk problems on keck35
- mediator stopped
- restarted gcp and masd
- weather: mostly clear, thin clouds, overcast, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- overcast, no starpointing
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_245.sch
- mediator stopped
- restarted gcp and masd
- 171026 08:57:08 Starting schedule: /home/keck/sch/mce_autotune.sch
- 171026 08:58:57 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_245.sch
- mediator stopped, at least I assume it was mediator, because without the windows it's hard to tell
- restarted gcp and masd
- 171026 22:13:24 Starting schedule: /home/keck/sch/mce_autotune.sch
- 171026 22:15:14 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_245.sch
- gcp stopped AGAIN
- restarted gcp and masd
- 171027 13:04:50 Starting schedule: /home/keck/sch/mce_autotune.sch
- 171027 13:06:40 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_245.sch
- 171027 23:30:36 abort_schedule, didn't change schedule
- /home/keck/sch/runend.sch
- weather: overcast, warm
- windows and baffles: windows mostly clear, ice build up around the venting holes on top of membrane, some snow in and on the baffles
- hole in membrane A, rx0, while trying to remove ice
- cyclefridge enable=2, on all rx
- overcast, no starpointing
- rx4 also got 2 pins
- restarted gcp and masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_244.sch
- pmac stopped
- mediator stopped
- restarted gcp and masd
- 171025 06:33:59 Starting schedule: /home/keck/sch/mce_autotune.sch
- 171025 06:35:53 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_244.sch
- forgot to change schedule, so it started with phase B again
- 171025 23:58:53 abort_schedule
- /home/keck/sch/runend.sch
- weather: thin clouds, overcast
- windows and baffles: windows clear, lots of snow in and on baffles
- cyclefridge enable=2, on all rx
- pmac stopped
- recharged comp 2, not as high as before, does that make any difference?
- thin clouds, no starpointing
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_243.sch
- az-diff jump
- 171022 12:51:13 suspend_schedule
- 171022 13:03:31 resume_schedule
- 171023 01:12:39 abort_schedule
- worked again on the crate, it was physically impossible to get them mated, removed one pin
- from backplate and press fitted it into the crate
- 171023 01:59:07 Starting schedule: /home/keck/sch/mce_autotune.sch
- 171023 02:02:38 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_243.sch
- rx1 working again
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, thin clouds, wind dying off
- windows and baffles: windows clear, very little snow in and on the baffles
- cyclefridge enable=2, on all rx
- pmac stopped
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_242.sch
- mediator stopped
- restarted gcp and masd
- 171020 09:11:44 Starting schedule: /home/keck/sch/mce_autotune.sch
- 171020 09:13:34 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_242.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, blowing snow, high winds, overcast
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- thin clouds, no starpointing
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_241.sch
- pmac stopped
- rx1 doesn't show any read out on sample bolos, but masd1 writing frme numbers
- 171019 00:56:51 abort_schedule
- try to reseat MCE1 and connectors several times, but always the same result
- 171019 01:56:24 Starting schedule: /home/keck/sch/mce_autotune.sch
- 171019 01:58:12 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_241.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, overcast, storm, blowing snow
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- swapped MCE rx1 with MCE rx4
- thin clouds, no starpointing
- restarted masd
- pmac stopped
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_240.sch
- /home/keck/sch/runend.sch
- weather: thin clouds
- windows and baffles: windows clear, little snow on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_239.sch
- /home/keck/sch/runend.sch
- weather: thin clouds
- windows and baffles: windows clear, little snow on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_238.sch
- /home/keck/sch/runend.sch
- weather: thin clouds
- windows and baffles: clear
- keck32 unresponsive restarted keck32, gcp, masd
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_237.sch
- /home/keck/sch/runend.sch
- weather: thin clouds
- windows and baffles:
- cyclefridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_236.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, thin clouds
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_235.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- restarted masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_234.sch
- /home/keck/sch/runend.sch
- weather: haze, wind picking up, storm, blowing snow, clearing, mostly clear
- windows and baffles: windows clear, some snow in the baffles
- cyclefridge enable=2, on all rx
- recharged comp 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_233.sch
- /home/keck/sch/runend.sch
- weather: haze overhead, clearing, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_232.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, haze
- windows and baffles: windows clear, little snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_231.sch
- 170928 15:30:11masd2 stopped, restarted masd2
- 170929 15:26:15 masd0 stopped, restarted masd0
- clk count was off for mce0 and mce2
- 170929 16:54:36 restarted all masd
- clk count back in sync
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, high winds, wind easing, thin clouds
- windows and baffles: windows clear, lots of snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_230.sch
- mediator stopped
- restarted gcp and masd
- 170927 04:38:45 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170927 04:41:44 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_230.sch
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, high winds
- windows and baffles: windows clear, some snow on a ton in the baffles, most I ever seen
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_229.sch
- /home/keck/sch/runend.sch
- data transfer caught up
- restarted gcp and masd
- weather: overcast, blowing snow
- windows and baffles: windows clear, some snow on the baffles
- cyclefridge enable=2, on all rx
- problems with omega0 system disk, replaced for now with last years disk
- data handling 30h behind, will take a bit to catch up
- signalhound and WVR data transfer compromised for now
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_228.sch
- /home/keck/sch/runend.sch
- weather: clear, overcast, blowing snow
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- el current drifting apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_227.sch
- mediator stopped
- restarted gcp and masd
- 170921 02:42:17 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170921 02:44:07 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_227.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, some thin clouds
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- 170920 04:46:05 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- 170920 06:43:07 Exiting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- running gcp and masd without keckViewer windows just in terminals
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_226.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, thin clouds, clearing
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 1,3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_225.sch
- /home/keck/sch/runend.sch
- weather: clear overhead, blowing snow
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 4
- running all keckViewers on keck31 none on keck32
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_224.sch
- 170915 21:28 LMR attenuation is off
- mediator stopped
- restarted gcp and masd
- 170916 00:16:44 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170916 00:18:33 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_224.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, overcast, blowing snow, clearing
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_223.sch
- mediator stopped
- restarted gcp and masd
- 170912 14:11:43 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170912 14:13:33 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_223.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead
- windows and baffles:
- cyclefridge enable=2, on all rx
- replaced bad He line with new spare
- running 2 keckViewers on keck31 instead of keck32
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_222.sch
- /home/keck/sch/runend.sch
- weather: clear, mostly clear overhead
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- He leak B high, replaced with spare line
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_221.sch
- mediator stopped
- restarted gcp and masd
- 170909 23:47:59 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170909 23:49:48 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_221.sch
- /home/keck/sch/runend.sch
- weather: overcast, high winds, blowing snow, clearing
- windows and baffles: clear
- cold rebooted all keck computers
- cyclefridge enable=2, on all rx
- recharged comp 2
- swapped air handler belt, installed belt ripped and compressors shut down due to high oil temperature
- replaced belt and restarted compressors after a few minutes, doesn't look like any significant impact on
- the temperatures
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_220.sch
- mediator stopped
- restarted gcp and masd
- 170906 23:41:15 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170906 23:43:05 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_220.sch
- keck37 froze
- rebooted keck37 and restarted masd4
- mediator stopped
- restarted gcp and masd
- 170907 23:38:23 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170907 23:40:13 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_220.sch
- /home/keck/sch/runend.sch
- weather: hazy, thin clouds, high winds, blowing snow
- windows and baffles: windows clear, little snow in and on the baffles
- cyclefridge enable=2, on all rx
- restarted gcp and masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_219.sch
- mediator stopped
- restarted gcp and masd
- 170905 21:18:54 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170905 21:20:43 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_219.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, hazy
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_218.sch
- mediator stopped
- restarted gcp and masd
- 170903 00:13:31 Starting schedule: /home/keck/sch/mce_autotune.sch
- 70903 00:17:18 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_218.sch
- /home/keck/sch/runend.sch
- weather: hazy
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_217.sch
- mediator crashes are back :(((
- restarted gcp and masd
- 170902 00:20:26 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170902 00:22:20 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_217.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, hazy
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_216.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, blowing snow
- windows and baffles: windows clear, quite a bit of snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 4
- restarted gcp, masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_215.sch
- mediator stopped, restarted gcp and masd
- 170828 10:48:58 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_215.sch
- el current drifting apart couple of times
- /home/keck/sch/runend.sch
- weather: clear, cold, mostly clear overhead
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- replaced readhead roller A2
- 170827 05:21:32 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 170827 08:48:53 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_214.sch
- az-diff jump, data are good until jump and after resume schedule
- 170827 00:33:58 resume_schedule
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, clear, cold
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_213.sch
- /home/keck/sch/runend.sch
- weather: thin clouds
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_212.sch
- /home/keck/sch/runend.sch
- weather: hazy, thin clouds, warm
- windows and baffles: windows clear, some snow in and on the baffle
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_211.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, very hazy
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_210.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, blowing snow, clearing, mostly clear overhead
- windows and baffles: windows clear, some snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_209.sch
- pmac stopped
- 170816 01:45 changed E high hose, rx4 FPU temp warmed up sligh
- /home/keck/sch/runend.sch
- weather: hazy, thin clouds, high winds, blowing snow
- windows and baffles: windows clear, tons of snow in the baffles
- cyclefridge enable=2, on all rx
- possible leak on comp 5
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_208.sch
- /home/keck/sch/runend.sch
- weather: clear overhead, perfectly clear, cold, hazy
- windows and baffles: windows clear, very litte snow on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_207.sch
- /home/keck/sch/runend.sch
- weather: clear overhead
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_206.sch
- /home/keck/sch/runend.sch
- weather: hazy, clear overhead
- windows and baffles: windows clear, a little bit of snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_205.sch
- /home/keck/sch/runend.sch
- weather: clear, hazy, blowing snow
- windows and baffles: windows clear, lots of snow in and on the baffles
- cyclefridge enable=2, on all rx
- 170807 06:37:22 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 170807 10:16:54 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_test_lc_at_diff_fpu_temp.sch
- 170805 12:33:15 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_204.sch
- /home/keck/sch/runend.sch
- weather: little hazy, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_203.sch
- /home/keck/sch/runend.sch
- weather: hazy, clearing overhead, blowing snow
- windows and baffles: windows clear, barely any snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_202.sch
- /home/keck/sch/runend.sch
- weather: clear, hazy
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_201.sch
- massive He leak A high
- due to do mechanical wear just behind the ladder
- swapped to spare line
- 170731 19:25:03 cycleFridge state=2, rx=rx0
- cycle did not work, excessive heating, pumped on rx0
- vacuum seemed good, cooled off very very slowly over the next hours
- vacuum az line seems to have a leak as well
- /home/keck/sch/runend.sch
- weather: hazy, clear
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_200.sch
- az diff barley jumped over 30k
- 170728 18:58:54 suspend_schedule
- replaced 1A readhead roller
- 170728 19:27:48 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_199.sch
- mediator stopped
- restarted gcp, masd
- 170726 18:14:05 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170726 18:17:15 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_199.sch
- /home/keck/sch/runend.sch
- weather: clear overhead, hazy, blowing snow, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_198.sch
- /home/keck/sch/runend.sch
- weather: clear, mostly clear overhead
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_197.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_196.sch
- /home/keck/sch/runend.sch
- weather: hazy, windy, very hazy
- windows and baffles:
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_195.sch
- /home/keck/sch/runend.sch
- weather: moslty clear, high winds blowing snow, hazy
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- pmac stopped!??
- el current drifting apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_194.sch
- masd3 stopped, came back after reboot of keck36
- /home/keck/sch/runend.sch
- weather: hazy, high winds, blowing snow
- windows and baffles: windows clear, little snow on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_193.sch
- pmac stopped during sky dip
- 170715 09:29:00 15min power outage
- all rx warmed up a bit above 300mK, all rx cooled down again after power was restored
- 170715 10:20:28 resume_schedule
- el current drifting apart
- /home/keck/sch/runend.sch
- weather: very hazy, blowing snow, clearing, clear
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- recharged comp 4,5
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_192.sch
- mediator stopped
- restarted gcp, masd
- 70712 22:03:29 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170712 22:05:19 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_192.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, very hazy, high winds, blowing snow
- windows and baffles: windows clear, quite some snow in and on the baffles
- cyclefridge enable=2, on all rx
- restarted gcp, masd
- installed new spare hose
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_191.sch
- mediator stopped
- restarted gcp, masd
- 170711 23:14:26 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170711 23:16:16 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_191.sch
- on the last 3 scans of last scanset of the run, I played around with syncbox and disconnecting
- one fibere to see if I could stall mediator, but did not
- /home/keck/sch/runend.sch
- weather: hazy, claering, very hazy, blowing snow, clear
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_190.sch
- mediator stopped
- restarted gcp, masd
- 170709 15:14:14 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170709 15:16:05 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_190.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, clear and cold, very hazy
- windows and baffles: windows clear, some fresh thin snow on the baffles
- cyclefridge enable=2, on all rx
- 170708 08:49:27 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 170708 12:15:26 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_189.sch
- 170707 00:57:22 Mediator: Lost scanner connection to Mce0
- restarted masd0 didn't help, cold restarted keck33
- a few scansets without rx0
- 170707 03:35:48 Mediator: Control connection established to Mce0
- mediator stopped
- restarted gcp, masd
- 170707 14:47:09 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170707 14:48:58 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_189.sch
- leak on rx2 lines
- pressure was only down to 263psi on the high side, but rx2 reacts very strongly to pressure drops
- recharged comp 1 and swaped for spare line, leaky line C high
- small increase in FPU temperature, but recovered after recharge
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, clearing
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_188.sch
- mediator stopped
- restarted gcp, masd
- 170705 00:44:19 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170705 00:46:08 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_188.sch
- mediator stopped
- restarted gcp, masd
- 170705 09:24:43 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170705 09:26:33 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_188.sch
- /home/keck/sch/runend.sch
- restarted gcp, masd
- weather: overcast, hazy
- windows and baffles: windows clear, snow on the baffles
- cyclefridge enable=2, on all rx
- it was A low with the leak, replaced bad line with new spare
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_187.sch
- /home/keck/sch/runend.sch
- weather: hazy, very hazy, overcast
- windows and baffles: windows clear, some snow on the baffles
- cyclefridge enable=2, on all rx
- replaced A low with spare line
- might be also A high, but with the small leak and both lines close to each other it is hard to tell
- will monitor over night
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_186.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- another He leak (small) on compressor 3, rx0
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_185.sch
- /home/keck/sch/runend.sch
- weather: very hazy, high winds, clearing, winds easing
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- installed new spare He line
- readjusted A1 back plane, was scratching slightly on one of the brass footings of the az track
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_184.sch
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, blowing snow, hazy, high winds
- windows and baffles: windows clear, little snow in and on the baffles
- cyclefridge enable=2, on all rx
- replaced readhead B2
- recharged comp 3,4 4 has a massive leak
- swapped D Hi for spare
- /home/keck/sch/mce_autotune.sch
- problems with masd and mediator stopped
- restarted gcp and masd
- rebooted keck33-37, keck37 reported disk problems
- raid array verified fine
- masd4 won't start connection lost to control program
- 170624 14:32:22 Starting schedule: /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_183.sch
- rx1 warmed up early, due to the problems during last fridgecycle
- /home/keck/sch/runend1.sch
- weather: hazy, high winds, blowing snow, mostly clear overhead
- windows and baffles: windows clear, some snow in the baffles
- cyclefridge enable=2, on all rx
- reseated all rx4 connectors and cards
- antenna crashed
- problems restarting the cycle
- had to reboot keck31 and keck32
- el motor current drifting apart
- was about half way through cycle
- 170624 09:44:44 did another single fridge cycle
- spudws 2 unresponsive
- restarted gcp and masd
- implemented sptr webpage fix - works :)
- changed schedlib.sch
- implemented trans_TES fix - works as well :)
- monitor plot for rx0 shows some strange gap after antenna crashed
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_182.sch
- masd0 quit after the frist 2 scansets, had to wait to reboot until RAID rebuilding was finished
- rebooted keck33, restarted masd0
- looks like keck33 RAID is working again, still have to perform some tests
- /home/keck/sch/runend.sch
- weather: very hazy, hazy, windy
- windows and baffles: windows clear, quite some snow in the baffles
- cyclefridge enable=2, on all rx
- brief power outage around 1130 170622
- restarted masd, rebuilding keck33 RAID array
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_181.sch
- mediator stopped
- 170621 13:27:15 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170621 13:28:38 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_181.sch
- /home/keck/sch/runend.sch
- weather: very hazy, warm
- windows and baffles: windows clear, quite some snow in the baffles
- cyclefridge enable=2, on all rx
- restarted masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_180.sch
- mediator stopped
- 170619 14:26:01 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170619 14:27:16 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_180.sch
- /home/keck/sch/runend.sch
- weather: clear, cold, getting overcast and warm, windy
- windows and baffles: windows clear, some snow in the baffles in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 1 to 296psi, rx2 even pressure was still 285psi, seems to help with 4K temp
- rx2 finished cycle again in normal time
- restarted gcp, masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_179.sch
- mediator stopped
- 170617 12:53:30 Starting schedule: /home/keck/sch/startpager.sch
- 170617 12:53:33 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_179.sch
- /home/keck/sch/runend.sch
- weather: hazy, clear, cold
- windows and baffles: windows clear, very little snow in and on the baffles
- cyclefridge enable=2, on all rx
- rx2 fridgecycle is taking longer than in the past
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_178.sch
- /home/keck/sch/runend.sch
- weather: hazy, overcast, hazy
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_177.sch
- /home/keck/sch/runend.sch
- weather: clear, hazy, very hazy
- windows and baffles: windows clear, little snow on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_176.sch
- mediator stopped
- 170611 10:00:33 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170611 10:01:48 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_176.sch
- /home/keck/sch/runend.sch
- weather: bit hazy
- windows and baffles: windows clear, some snow on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_175.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, windy, haze
- windows and baffles: windows clear, little snow on the baffles
- cyclefridge enable=2, on all rx
- 170608 10:03:23 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 170608 13:57:18 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- recharged comp 2,3,4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_174.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, hazy, clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- restarted gcp, masd
- late start due to problems with cycle, see below
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_173.sch
- mediator stopped
- restarted gcp, masd
- 170605 10:32:25 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170605 10:33:41 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_173.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- 4K warming up abnormal cycle
- stopped cycle
- problems with antenna, rebooted keck31
- waiting on 4K to come down again
- 170604 11:06:03 Starting schedule: /home/keck/sch/fridgecycle.sch
- still problems with keck33 RAID controller
- booted computer with HDD directly connected to Mainboard, bypassing RAID controller
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_172.sch
- masd0 stopped
- restarted masd
- 170602 15:46:56 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170602 15:48:11 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_172.sch
- mediator stopped AGAIN!!!
- keck33 is unresponsive
- problems with keck33 after the rebuilding the array
- starting the run without keck33
- 170603 02:05:55 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170603 02:07:10 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_172.sch
- /home/keck/sch/runend.sch
- weather: mostly clear,hazy,
- windows and baffles: windows clear, quite some snow in the baffles
- cyclefridge enable=2, on all rx
- worked on RAID array on keck32, webinterface is working
- keck33 also had one bad disk, rebuilding RAID array
- restarted keck32
- restarted gcp, masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_171.sch
- mediator stopped
- 170601 12:08:50 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170601 12:10:05 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_171.sch
- mediator stopped
- aborted run, was after 2300LST
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_170.sch
- mediator stopped
- restarted gcp, masd
- 170530 10:57:18 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170530 10:58:33 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_170.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- el current drifting apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_169.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_168.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, hazy
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- put new spare He line in
- replaced A high with spare
- put new spare He line in
- el current drifting apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_167.sch
- massive He leak in A high, had to recharge twice during run
- around 170525 0400 rx0 FPU went a bit over 300mK
- recovered after recharge
- /home/keck/sch/runend.sch
- weather: clear, clear overhead
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- swapped Raid controller in keck32 with spare
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_166.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, wind picking up again
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 2, swapped B high with spare line
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_test_plc_at_diff_fpu_temps.sch
- 170519 15:41:24 abort_schedule
- lost connection to masd 0,1,3
- restarted masd
- 170519 15:43:12 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170519 15:44:40 Starting schedule: /data/keckdaq/autoqueue/pending/1_test_plc_at_diff_fpu_temps.sch
- 170519 17:48:52 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_165.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, hazy, blowing snow, clear overhead
- windows and baffles:
- cyclefridge enable=2, on all rx
- recharged comp 3,4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_164.sch
- small az-diff jump just over 30k
- 170518 00:57:01 suspend_schedule
- replaced readhead roller 1B
- data would be good through the jump, since it was only barely above 30k but definitely after resume schedule
- 170518 01:41:24 resume_schedule
- 170518 07:36 archiving stopped
- Disk suddenly on read only mode
- restarted keck32
- mediator stopped after few seconds, most likely an old open archive file, closed it by hand
- 170518 08:38:11 file 20170518_072445.dat.gz most likely corrupt
- 170518 08:37:13 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170518 08:38:27 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_164.sch
- /home/keck/sch/runend.sch
- weather: hazy, high winds, blowing snow
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- later start due to keck32 problems
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_163.sch
- 170516 02:14:16 suspend_schedule
- stopped run to attend puls tube lines in rx4, only way to get to it is from above
- lifted the frontplate a bit, luckely rx4 is where we the pinion gear is so there were cuts
- didn't see any lines touching, but only limited view, put some absorbent pads between lines and rx4
- that is all we can do now
- 170516 02:41:30 abort_schedule
- so much snow in the baffles in the last 12h so I had to abort cmb run and run the snow schedule
- since it was warm and not much wind, we used the time to clear out snow from the ground shield from the last days
- with 2 of us it took us close to 2h, tons of snow
- 170516 04:27:20 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170516 04:28:35 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_163.sch
- 170516 07:04:43 el motor current drifting apart
- reset el motor current
- 170517 02:57:11 abort_schedule
- working more on debugging mediator stops with Grantland
- 170517 04:42:04 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170517 04:43:18 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_163.sch
- /home/keck/sch/runend.sch
- weather: very hazy, thin clouds
- windows and baffles: windows clear, quite some snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2
- IT did some changes to the spfs, therefore there were some problems with data going out
- changes sptr_put.pl accordingly and data are moved to spfs again
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_162.sch
- keck 32 crashed
- when rebooting keck 32, it showed degraded RAID array
- removed faulty disk and installed new one and started rebuilding RAID array
- weather: hazy, very hazy
- windows and baffles: windows clear, some snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_161.sch
- /home/keck/sch/runend.sch
- weather: hazy, warm
- windows and baffles: windows clear, some snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_160.sch
- /home/keck/sch/runend.sch
- weather: clear, totally overcast, wind picking up
- windows and baffles: windows clear, some snow in on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 2
- restarted gcp, masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_159.sch
- omega0 eth0 stopped again, restarted network for now, will observe
- /home/keck/sch/runend.sch
- weather: little hazy, claering, clear and cold
- windows and baffles: windows clear, some snow on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_158.sch
- az diff jump
- 170506 03:32:31 resume_schedule
- date a good before jump and after resume
- az diff jump, replaced readhead roller 3A
- 170506 13:25:09 resume_schedule
- date a good before jump and after resume
- omega0 network problems to station, lost both keckviewers in the station
- restart keckviewer in station
- lost connection again
- could not reconnect ot omega0 ???
- mediator stopped
- 170507 10:50:40 abort_schedule
- weather: clear, very hazy
- windows and baffles: windows clear, quite some snow in the baffles
- cyclefridge enable=2, on all rx
- 170505 12:03:51 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 170505 16:38:23 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_157.sch
- /home/keck/sch/runend.sch
- restarted gcp and masd
- weather: hazy, clearing, clear
- windows and baffles: windows clear, barely any snow on the baffels
- cyclefridge enable=2, on all rx
- recharged comp 2,3
- starting a debug version (for mediator) of gcp
- restarted gcp and masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_156.sch
- mediator stopped
- 170503 07:04:32 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170503 07:05:46 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_156.sch
- /home/keck/sch/runend.sch
- weather: clear, cold, hazy towards runend
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- restarted masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_155.sch
- /home/keck/sch/runend.sch
- weather: clear, mostly clear, cold
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- restarted gcp, masd to initiate a some debugging changes for mediator
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_154.sch
- /home/keck/sch/runend.sch
- weather: hazy, clearing, some haze, clear towards runend
- windows and baffles: windows clear, very little snow on the baffles
- cyclefridge enable=2, on all rx
- el current drift
- recharged comp 2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_153.sch
- mediator stopped
- restarted gcp, masd
- problems with masd2, restarted keck35
- 170426 05:49:09 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170426 05:50:25 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_153.sch
- weather is not good so decided to stop the run briefly to put in new spare He line
- 170427 04:46:13 suspend_schedule
- 170427 05:14:36 resume_schedule
- mediator stopped
- restarted gcp, masd
- 170427 05:52:58 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170427 05:54:12 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_153.sch
- /home/keck/sch/runend.sch
- weather: overcast, very hazy
- windows and baffles: windows clear, quite some snow in and on the baffles
- cyclefridge enable=2, on all rx
- restarted gcp, masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_152.sch
- mediator stopped
- restarted gcp, masd
- 170425 06:46:31 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170425 06:47:46 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_152.sch
- /home/keck/sch/runend.sch
- weather: cold and clear, warming up, getting hazy, overcast
- windows and baffles: windows little snow in the center, some snow on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_022.sch
- 170421 23:26:07 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_151.sch
- /home/keck/sch/runend.sch
- weather: cold and clear
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_150.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 3,5 leak on comp 5
- replaced E Low with spare
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_149.sch
- mediator stopped
- 170418 04:50:29 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170418 04:51:44 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_149.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_148.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: windows clear, some snow in the baffles
- cyclefridge enable=2, on all rx
- 170415 13:53:25 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 170415 17:38:07 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- el current drifiting apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_147.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, haze, clear, getting cold
- windows and baffles: windows clear, some snow on the baffles
- cold reboot of keck32 and keck31
- restarted gcp and masd
- cyclefridge enable=2, on all rx
- webplots stopped
- problems with webplots & control, had to restart keck32 again
- restarted gcp and masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_146.sch
- mediator stopped
- restarted gcp and masd
- 170413 00:23:45 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170413 00:34:29 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_146.sch
- gcp was in a wired state
- restarted gcp and masd
- 170413 03:52:19 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170413 03:53:32 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_146.sch
- /home/keck/sch/runend.sch
- weather: haze, partly clear, overcast, haze
- windows and baffles: windows clear, some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_145.sch
- mediator stopped
- restarted gcp and masd
- 170411 04:34:53 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170411 04:36:08 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_145.sch
- /home/keck/sch/runend.sch
- weather: totally overcast, clear
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_144.sch
- /home/keck/sch/runend.sch
- weather: haze, clear, totally overcast
- windows and baffles: windows clear, quite some snow in and on baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_143.sch
- mediator stopped
- restarted gcp, masd
- 170406 03:22:36 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170406 03:24:17 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_143.sch
- /home/keck/sch/runend.sch
- weather: blowing snow, hazy, clear, some clouds
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- recharged comp 2
- reset sync box
- restarted gcp and masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_142.sch
- mediator stopped again
- restarted gcp, masd
- 170405 08:12:46 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170405 08:14:00 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_142.sch
- 170405 12:51:29 abort_schedule
- /home/keck/sch/runend.sch
- weather: thin clouds, overcast, blowing snow, high winds, hazy
- windows and baffles: windows clear, lots of snow in and on the baffles
- cyclefridge enable=2, on all rx
- recharged comp 3
- replaced 4B readhead roller
- while reading mediator, i.e. marking the text to with mouse to read it, mediator stopped, rx1,2,3 didn't finish cycle
- 170403 17:54:15 cycleFridge enable=1 on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_141.sch
- no siginficant heating on rx1,3,4
- 170401 18:44:10 abort_schedule
- 170401 18:45:39 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170401 18:46:54 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_141.sch
- mediator stopped again
- had to restart gcp, masd
- 170403 04:37:01 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170403 04:38:57 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_141.sch
- 170403 13:02:19 abort_schedule
- /home/keck/sch/runend.sch
- weather: haze, clear, thin clouds
- windows and baffles: windows clear, some snow in and on baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_140.sch
- /home/keck/sch/runend.sch
- weather: overcast, thin clouds
- windows and baffles: windows clear, some snow in the baffles
- restarted gcp,masd
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_139.sch
- mediator stopped
- restarted gcp, masd
- 170329 06:25:06 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170329 06:28:08 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_139.sch
- /home/keck/sch/runend.sch
- weather: clear, getting overcast
- windows and baffles: windows clear, quite some snow in and on the baffles
- cyclefridge enable=1, on all rx
- recharged comp 2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_021.sch
- weather: clear overhead
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_138.sch
- saw no significant heatin on rx1,3
- restarted gcp & masd
- 170326 18:30:36 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170326 18:31:50 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_138.sch
- mediator stopped
- restarted gcp, masd
- rx1 was at .5K UC as well, decided on fridgecycle
- weather: clear, some clouds
- windows and baffles:
- cyclefridge enable=2, on all rx
- 170326 14:54:43 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- 170326 16:59:19 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_137.sch
- don't see very much fpu heating on rx1,3,4
- 170324 19:11:45 abort_schedule
- restarted masd and gcp
- 170324 19:13:30 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170324 19:14:44 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_137.sch
- see fpu heating except rx3
- /home/keck/sch/runend.sch
- weather: clear overhead
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_136.sch
- /home/keck/sch/runend.sch
- weather: clear overhead
- windows and baffles: windows clear, very little snow in the baffles
- cyclefridge enable=2, on all rx
- recharged comp4
- rx4 tcm heater tuning
- adjusted target value to -2.10
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_135.sch
- 170320 19:54:54 abort_schedule
- did not see trans_TES on rx1,3,4
- restarted masd
- 170320 19:56:00 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170320 19:57:14 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_135.sch
- still not seeing the spikes very well!?
- 170322 10:30:31 abort_schedule, to have more time to tune rx4 after cycle
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clearing
- windows and baffles: windows clear, lots of snow in and on baffles
- cyclefridge enable=2, on all rx
- el current drifting apart
- /home/keck/sch/mce_autotune.sch
- 170318 16:57:28 Starting schedule: /data/keckdaq/autoqueue/pending/1_superfastnoise_1_008.sch
- schedule stopped after a while
- MAS daemon is not running or not responding
- 170319 00:45:24 abort_schedule
- restarted masd
- 170319 00:50:59 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170319 00:51:33 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_134.sch
- mediator stopped again!!!
- restarted gcp, masd
- 170319 01:02:28 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170319 01:03:42 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_134.sch
- 170319 01:04:40 Mediator: Lost connection to Mce3
- 170319 01:04:41 Mediator: Lost connection to Mce1
- 170319 01:06:04 abort_schedule
- 170319 01:08:20 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170319 01:09:36 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_134.sch
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clear period, getting overcast again
- windows and baffles: windows clear, quite some snow in and on the baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_133.sch
- az diff jump, replaced readhead roller A3, readjusted B3
- readjusted osborne rollers on wheel housing 3
- mediator crashed again
- cold reboot of keck31 and 32
- el motor current drifting apart
- 170318 08:17:07 abort_schedule
- possible He leak in compressor 5
- He leak E Hi afrimative, replaced az line with spare
- el motor current drifting apart
- can't write log files, wired state of controlSystem
- had to restartkeck31 and keck32 again
- weather: overcast, wind increasing, totally overcast, high winds, low vis
- windows and baffles: a bit of snow on the windows, quite some snow in and on the baffles
- cyclefridge enable=2, on all rx
- cyclefridge enable=2, on all rx
- recharged compressor 3,5
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_132.sch
- mediator stopped around 170316 01:20
- restarted mediator, but still some errors
- had to restart gcp
- /home/keck/sch/runend.sch
- weather: mostly clear, getting overcast
- windows and baffles: windows clear, some snow in and on baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_019.sch
- masd3 stopped, restarted masd3 strange scroll of masd3 in keckviewer?
- 170314 03:25:50 abort_schedule
- 170314 03:26:24 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_019.sch
- some masd problems, masd no responding
- 170314 04:03:38 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_019.sch
- 170314 10:00:10 Exiting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_019.sch
- 170314 10:00:10 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_020.sch
- 170314 15:58:01 Exiting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_020.sch
- /home/keck/sch/runend.sch
- weather: clear and cold during run 019, some thin clouds during 020
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- some problems with the N2 purge system, we use way to much N2
- mediator crashed
- weather: clear
- windows and baffles: clear
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_017.sch
- el motor currents drifting apart
- 170313 04:07:44 restarted masd3
- weather: clear, some very thin clouds
CMB 2017
- cyclefridge enable=2, on all rx
- cyclefridge enable=2, on all rx
- cyclefridge enable=2, on rx0
- cyclefridge enable=2, on all rx
- rx0 still gives problems during the cycle, 4K warms up over 10K with state 9 in the cycle???
- stopped cycle on rx0 and set all heaters to 0
- turns out rx0 always goes qutie high, just about to 10K
- so cycles are good
- 170310 21:55 changed data compression back to lzma, all fff data went out via satellite
- removed FFF, only minimal warm up, compressors were off for less than 15min. rx0 needed a bit of pumping
- cyclefridge enable=2, on all rx
- 170311 05:31:09 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- still some problems with fridge cycle on rx0
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_008.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_008.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_008.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_007.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_007.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_007.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_007.sch
- cyclefridge enable=2, on all rx
- recharged comp 2,3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_007.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_007.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_007.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_007.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_007.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_007.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_006.sch
- cyclefridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_006.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_006.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_006.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_006.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_006.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_006.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_006.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_005.sch
- 170227 00:58:36 abort_schedule
- installed fixed fans on unit, but problem is not overheating anymore it is
- motor "over speed" reduced the analog in from 5v to 4.75V that corresponds to 16Hz
- new schedule number with 006 has 16Hz chopper frequency
- cyclefridge enable=2, on all rx
- chopper stopped during fridgecycle so scheudles are good
- rearanged fan
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_005.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_005.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_005.sch
- cyclefridge enable=2, on all rx
back mirror position
- Front top -> 57.5in (E&F)
- Front bottom -> 23.5in (A&B)
- Back -> 25.2in (G&H)
- all new schedules with this mirror position will be starting with *005.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_004.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_003.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_003.sch
- 170223 07:46:03 abort_schedule
- chopper stopped again
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_003.sch
- 170222 04:33:23 abort_schedule
- chopper stopped again
- will re-run 33h_003.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_002.sch
- chopper stopped again towards the end of the run, most likely not pigtails but motor controller
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_002.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_002.sch
- DSL chopper stopped working
- 170220 04:20:18 abort_schedule
- bad connection on the pigtail
- chopper running again
- will rerun 33j_002
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_002.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_002.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_002.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33d_003.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33j_001.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33i_001.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33h_001.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33g_001.sch
- cyclefridge enable=2, on all rx
Winter 2017
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33f_001.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33c_003.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_003.sch
- masd0 did not start
- keck33 unresponsive, reboot, took long time for disk check
- 170213 08:06:58 Exiting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_003.sch
- 170213 09:21:00 Starting schedule: /home/keck/sch/mce_autotune.sch
- 170213 09:22:15 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33b_003.sch
- cyclefridge enable=2, on all rx
- compressor 3 was quite low
- one of omega0 PSU died (the newest one in the middle slot!?)
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33a_003.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_002.sch
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_33e_002.sch
- all new ffflat will start with 002 now
- keck32 /data run full since it was still on cmb mode and tmp2 dir for purge_data.pl was deleted on omega0
- gonna rerun7_ffflat_dslmast_33e_002.sch
- /home/keck/sch/runend.sch
- weather:
- windows and baffles:
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- 170210 11:15:41 7_ffflat_dslmast_33a_001
- First started this schedule at 10:42:54, but aborted to run mce_autotune.sch
- Chopper still at ~16 Hz
- Weather cleared by the start of 33a_001.
- /home/keck/sch/mce_autotune.sch
- 170211 00:23:18 7_ffflat_dslmast_33d_001
- /home/keck/sch/mce_autotune.sch
- 7_ffflat_dslmast_33c_000.sch
- 170209 05:21:40 - 170209 13:02:37
- 16Hz chop ran all the way through? - data may be good
- /home/keck/sch/mce_autotune.sch
- 170209 21:05:14 - 170210 04:49:2 7_ffflat_dslmast_33e_001
- First started this schedule at 20:56:56, but aborted after 11 seconds to run mce_autotune.sch
- Weather is bad. Low visibility, blowing snow, 18+ knot winds
- 7_ffflat_dslmast_33b_000.sch
- 170208 00:34:00 - 170208 08:14:24
- 12Hz chop ran all the way through - data is probably good
- 7_ffflat_dslmast_33b_000.sch
- 170207 12:06:01 - 170207 19:46:30
- 16.6Hz chop
- fridge ran out - and chopper wasn't running
- 7_ffflat_dslmast_33a_000.sch
- 170207 04:24:17 - 170207 12:06:01
- 16.6Hz chop
- chopper stopped 30 mins in with over speed error
- Reinstalled rx4 membrane and adjusted flow rates on all.
- Set minimal flow on all - up top (after time to stabilize) all membranes appear at least minimally pressurized.
- However only two register close to recommended value on feedback gauges (D&C) - rest close to or at zero.
- Leave it to Robert to determine if membrane convexity is adequate/normal.
- 170205 21:00:00 Hoisted mirror to "new front position"
- A,B @ 10.74in
- E,F @ 53.84in
- G,H @ 30.47in
- Concerned this may push the current even higher at max el.
- 170204 04:00:00 went to horizon to install FFF
- 170204 04:30:00 raised FFF to 45deg elevation
- 170204 04:30:00 rx0 failed to re-cool like the rest - 4K temps eventually came back down around 170205 00:00:00 - would have pumped on it but vacuum gauge was not working.
- 170202 22:08:45 started keckycal_001.sch on Rx0, run 5. Weather: some clouds on horizon, -34 C. Finished 170202 23:00:12
- 170202 23:05:57 started keckycal_001.sch on Rx0, run 6. Weather: some clouds on horizon, -34 C. Finished 170202 23:36:13
- 170203 02:15:32 Started test procedure for determing DSC rotation axis on Rx0 for a second time, this time with the 0/45 degree measuring bar. Finished 170203 03:38:41.
- 170203 08:07:46 started 1_keckycal_001.sch on Rx1, run 3. Weather: some clouds on horizon, -34 C. Finished 170203 08:54:34
- 170203 08:55:08 started 1_keckycal_001.sch on Rx1, run 4. Weather: some clouds within 20 deg of zenith, -34 C. Finished 170203 09:25:25
- 170201 23:56:18 Started keckycal_001.sch on Rx4, run 1. Weather is clear -33 C. Finished 170202 00:40:47.
- 170202 00:41:57 Started keckycal_001.sch on Rx4, run 2. Weather is clear -33 C. Finished 170202 01:14:26.
- 170202 01:14:43 Started keckycal_001.sch on Rx4, run 3. Weather is clear -33 C. Finished 170202 01:45:46. Took trailing angle measurements before the schedule was ready. It should still be ok because the DSC didn't rotate, but maybe the dk did.
- 170202 01:46:47 Started keckycal_001.sch on Rx4, run 4. Rotated the DSC clockwise instead of the usual CCW. Finished 170202 02:31:25
- 170202 03:56:56 Started test procedure for determing DSC rotation axis on Rx4. Finished 170202 05:08:21.
- 170202 07:20:28 Started 9_kCMB_50_132.sch
- 170201 01:25:47 Starting schedule: 1_forebaffle_on_off_4_010.sch, on all receivers
- 170201 06:48:22 /home/keck/sch/starpoint_pole_keck_summer.sch
- 170201 08:03:56 /home/keck/sch/starpoint_pole_keck_summer.sch
- Both above runs pretty successful - together = good data set
- 170131 02:33:44 Started keckycal_001.sch on Rx3, run 1. Weather is pretty bad -32 C. Finished 170131 03:24:18.
- 170131 03:43:29 Started keckycal_001.sch on Rx3, run 2. Hazy. Finished 170131 04:11:48.
- 170131 04:16:23 Started keckycal_001.sch on Rx3, run 3. Hazy. Finished 170131 04:45:27.
- 170131 07:15:16 Started test procedure for determining DSC rotation axis on Rx3. Finished 170131 08:21:18.
- Weather: thin clouds and blowing now.
- 170129 21:38:45 Started keckycal_001.sch on Rx0, run 3
- Note: we rotated the calibrator before the appropriate spot in the schedule. Then we rotated it in the opposite direction
- 170129 22:24:35 Started keckycal_001.sch on Rx0, run 4. Finished 170129 23:14:42
- 170130 02:50:09 Started keckycal_001.sch on Rx1, run 1. It's cloudy for this run.
- 170130 03:52:48 Started keckycal_001.sch on Rx1, run 2. Still clouds in the sky. Finished 170130 04:33:31
- 170130 04:40:23 Started test procedure for determining DSC rotation axis on Rx1. Finished 170130 06:14:09
- 170130 08:36:17 Started keckycal_001.sch on Rx2, run 1. Finished 170130 09:21:23
- 170130 09:22:02 Started keckycal_001.sch on Rx2, run 2. Finished 170130 09:57:59. Weather some clouds above. -33 C
- 170130 10:01:21 Started keckycal_001.sch on Rx2, run 3. Finished 170130 10:41:43. Kind of a flat sky; not completely overcast, not blue.
- 170130 21:14:37 Started test procedure for determing DSC rotation axis on Rx2. Finished 170130 22:18:48.
- 170130 22:49:55 Started keckycal_001.sch on Rx2,
run 4 (Aborted at 170130 23:17:50). Cloudy and snow is falling on membrane. One extra splash of frozen snot on highest edge (when at Zenith) of sheet.
- Weather slightly hazy from blowing snow. Very windy with blue overhead.
- 170129 06:52:30 Started keckycal_001.sch on Rx0, run 1
- Note: Membrane is not pressurized. Also, forgot to hit resume_schedule before starting to rotate, so there are an extra 4 rotations (with combine on) between the marked encoder count and where the rotation data are marked with a feature bit.
- 170129 07:54:37 Started keckycal_001.sch on Rx0, run 2
- Note: Using larger measuring bar for this run.
- Ran a test procedure for the Keckycal on Rx0 to see if we can determine the axis of rotation vs the dk rotation axis. Started 01:53:33. Finished 05:00:24
- Completed FTS on rx2 around 16:00 UTC. Will remove FTS tomorrow.
- Started FTS on rx2 around 09:00 UTC. Will use same data taking strategy as on rx0, and will continue using tarp.
- Completed FTS on rx0 around 15:00 UTC. Will move to rx2 tomorrow.
- FTS on rx0 still ongoing. Finished rot=45, then started rot=90. Noticed motors started malfuncitoning in the cold, so placed large tarp over entire FTS. This solved the problem. All subsequent FTS data this season will be taken with a tarp over the FTS.
- Started FTS on rx0. Strategy: take data at FTS rotation angle rot=45 deg (covers A and B pol) at all nine pointings on all tiles. Then take data at rot=0,90 (covers only A or only B) and take five pointings per tile.
- Rx1 compressor leaks ~10 PSI per day. Recharged to 290 PSI.
- Took G data on Rx1 every 10mK from 270 to 400 and 425
- Took G data on Rx3 every 10mK from 270 to 390mK
- Rx1 almost finished cooling back down. Coldplate temp still elevated at ~4.2K. High side compressor pressure was at 260 PSI. Charged it to Robert-recommended 285 PSI at ~01:25:00. This cooled coldplate by 0.1 K, but it's now rebounding some.
- SNK: Made G Measurement in rx0. Tried making G measurements in rx4, observed squid jumps in dark pixels. Retuning squids for rx4.
- Disconnected He lines from compressor for Rx1.
- Performed 2 pump + purge cycles on Rx1 pulse tube through mount and compressor He lines. Filled to 50 PSI between pump and purge. Then pumped on lines and PT for 4 hours and filled with He to match compressor pressure. Reconnected lines to compressor and turned on at ~ 01:45 UTC. 4K coldhead had warmed to slightly over 100K.
- 1701112: Second time we fridge cycled all Rx after the re-loading of Rx4-K5-270GHz on Tuesday Jan 10th. All Rx fridge cycled properly except for Rx1 which failed twice getting stuck on step 5. Step 5 is the point where the pump heaters are turned off and the cycle waits for the He4 condensation point to drop below T=4.4K.
- Refilled Rx1 from Phi= 265PSI to Phi=285PSI.
- Sadly that seems to have made the 4K temperatures rise, not go down
- Decide to let Rx1-K2 warm up tp 70K and pump on it to see if it's caused by residual gas in cryostat.
- Refilled compressors 2 and 4 to nominal pressures.
- 16121331: Fridge cycle Rx0-3 so we can check the squid tuning of all of them tomorrow.
- 161213 03:17:45 shutting down GCP to decrease HDD load on
keck32 while RAID sync occurs. (Replacing old HDDs on all keckdaq
machines with new.)
Summer 2016-17
- With new FP on the way, have ceased observations for 2016.
- Congratulations on a productive 2016 observing season!
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_132.sch
- 161205 03:35:12 Az fatal following error
- 161205 05:46:48 abort schedule
- Debugging az fatal following error - hear nothing with
stethoscope, but notice some variability in mount motion rate
as driven with the hand-controller box.
- Sit near edge of upper mount as mount being driven in azimuth
- opinion is that “jerking” is worse than even a
couple of weeks ago.
- Stopping observations (and locked out mount) until discussion
with others occurs.
- /home/keck/sch/runend.sch
- weather: partly cloudy,
- windows and baffles:
- cyclefridge enable=2, on all rx
- recharged compressor 2 (rx1)
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_131.sch
- /home/keck/sch/runend.sch
- weather: high clouds, clearing, partly cloudy
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_130.sch
- /home/keck/sch/runend.sch
- weather: partly cloudy, clearing, blowing snow
- windows and baffles: some snow/ice in baffles
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_129.sch
- /home/keck/sch/runend.sch
- weather: partly cloudy
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_128.sch
- 161127 21:00:00 Started signalhound calibration with active use
of radios and signal source.
- 161127 21:45:00 Done with calibration.
- /home/keck/sch/runend.sch
- weather: partly cloudy
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_127.sch
- /home/keck/sch/runend.sch
- weather: partly cloudy
- windows and baffles: clear
- cyclefridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_126.sch
- 161123 20:50 Recharged comp 3 (rx0) from 260psi to 275psi. Leak
checking az lines while scanning didn't find anything. Will
check again during fridge cycle when mount can be moved
manually.
- /home/keck/sch/runend.sch
- weather: partly cloudy, blowing snow, clearing
- windows and baffles: snow and ice along base
- cyclefridge enable=2, on all rx
- Installed new forebaffle variacs
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_125.sch
- 161121 04:08:23 MCE4 bolometers not showing any data. Restarted
masd4 and restarted schedule.
- Still not responding. Rebooting keck37. Got stuck with a disk
check... Missed getting connected again before B01.
- MCE4 didn't return on B02. I don't know how to get it
reconfigured except by redoing CMB startup sequence, so abort
schedule.
- 161121 05:28:16 abort_schedule
- 161121 05:28:37 redo mce_autotune.sch
- 161121 05:30:02 restart CMB schedule
- MCE4 still not taking data, and then all updates to GCP pages
stopped, so restart all masd and GCP. Then MCE4 dsp won't
respond, so try cold rebooting keck37 again.
- Even after reboot and restart of schedules, still not getting
data from MCE4 - appears to be problem in initializing masd4.
Sent email to keckarray list.
- Will run from B03 onward with just rx0-3 until advice from
others received.
- 161121 20:35:02 suspend_schedule - deal with az-diff jump
- Power-cycled MCE4. mce_status returns with no errors,
so going to try restarting the CMB schedule to see if rx4 data
will now be taken.
- 161121 20:49:39 Exiting schedule
- Power-cycled MCE4. mce_status returns with no errors,
so going to try restarting the CMB schedule to see if rx4 data
will now be taken.
- Still not acquiring data
- Did nothing new, but mce4 came back to life for D01.
- /home/keck/sch/runend.sch
- weather: clear, partly cloudy
- windows and baffles: clear
Swapped compressor 4 (after topping up oil level) in for
compressor 5.
Topped up compressor 4 helium to get hi-side pressure to
~295psi. Smaller than normal pressure differential, with low-side
pressure ~130psi.
161108 00:02:43 Station power outage. Temporary stop in scans
during D02.
161108 00:08:13 Took manual control of mount to oil the az wrap
which started to whine.
161108 00:14:02 Returned PMAC control to GCP
161108 00:29:00 Turn off compressor for rx4 (compressor 4)
Swap compressor 5 back in to running rx4; compressor 4 back into
hallway as a spare.
161108 00:37:00 rx4 compressor turned back on
161108 02:33:00 rx4 compressor pressure a bit high now (extra He
from raising pressure when on compressor 4??). Released He until
hi-side ~195psi.
161108 18:47:38 MCE1 stopped taking data. Restarted masd1.
Did not come back with next scanset. Reboot keck34.
161108 20:37:35 MCE1 still not taking data. Did shutdown and cold
startup of keck34.
/home/keck/sch/runend.sch
weather: cloudy, partly cloudy
windows and baffles: snow and ice in baffles and around edges of
windows
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_117.sch
- 161105 05:15:57 - mistake by summer-over-in-training during az track cleaning caused az-diff jump; fixed between sky-dip and B01 scans
- recharged compressor for rx2
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clearing at ground level, overcast
- windows and baffles: minor amount of snow in and on baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_116.sch
- 161103 12:18 antenna/mediator crashed
- restarted masd gcp
- 161103 12:25:02 schedule /home/keck/sch/mce_autotune.sch
- 161103 12:26:50 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_116.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, clearing, overcast, blowing snow
- windows and baffles: windows clear, little snow in and on the baffle
- cycleFridge enable=2, on all rx
- swapped compressor 4 with spare, bad vibration
- according to cyromech data, looks like at least 3 out 6 compressors need addtional oil !!!!
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_115.sch
- comp4 still losing pressure, haven't found the leak yet
- /home/keck/sch/runend.sch
- weather: clear, haze, thin clouds
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- D high had a massive wear through the outer breading behind the ladder, but also D low had a small leak
- both lines were installed Nov 2015, installed 2 new lines
- comp 4 has some vibration, probably should get a new motor unit for that one as well
- rx2 is still good and going through normal fridgecycle
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_114.sch
- 161031 06:15 rx3 warming up, massiv He leak, can't tell which line yet, since it
- seems right behind the ladder
- restarted masd3
- rx3 recording data again
- at the momemt it looks like we got 2 leaks one in D high, one in D low
- /home/keck/sch/runend.sch
- weather: thin clouds, haze, overcast, clearing
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- no pressure loss on rx2, still going strong
- /home/keck/sch/mce_autotune.sch
- rx2 didn't make it also the second fridgecycle looked promesing
- /data/keckdaq/autoqueue/pending/9_kCMB_50_113.sch
- 161028 07:55:34 abort_schedule
- starting run with rx2 as well
- recharged comp 1 even higher to 315psi, 4K is now back in the normal range
- 161028 07:55:40 schedule /home/keck/sch/mce_autotune.sch
- 161028 07:58:10 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_113.sch
- rx2 staying cold, now the lowest 4K
- /home/keck/sch/runend.sch
- weather: thin clouds, mostly clear, clear, clouds moving in
- windows and baffles:
- cycleFridge enable=2, on all rx
- recharged comp1,4
- we might have another slight leak on comp1, which might explain the strange behavior on rx2
- charging it up to 300psi, seems to help with the 4K temperature, pressure on compressor changes quite a bit
- during different times of the run
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_112.sch
- the 4k warmup on rx2 through it off again, running that run with only 4rx again
- since rx2 cooled down well and looks good, I restarted the cmb schedule just before the gal scan sets
- 161026 23:28:05 abort_schedule
- 161026 23:28:38 schedule /home/keck/sch/mce_autotune.sch
- 161026 23:29:54 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_112.sch
- ok rx2 didn't make it all the way, started to warm up slightly over 300mK during the last scansets
- /home/keck/sch/runend2.sch
- weather: clear overhead, haze, blowing snow
- windows and baffles: windows clear, very little snow on the forebaffles
- cycleFridge enable=2, on all rx
- started rx2 cycle one scanset early
- 161025 22:37:42 cycleFridge enable=2, rx=rx2
- well, that didn't work, even for the other cycles, rx2 was disabled
- something happened and rx2 4K warmed up to 10K
- el current drifting apart
- missed first scanset, but running on all 5rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_111.sch
- /home/keck/sch/runend2.sch
- weather: mostly clear overhead, blowing snow
- windows and baffles: windows clear, very little snow on the baffles
- cycleFridge enable=2, on all rx
- comp 4 has elevated noise
- rx2 cycle still the slowest, but might just make the first scanset
- checked osborne rollers, are tight in some places and not touching on others, did not adjust them since last adjustment
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_110.sch
- running without rx2
- 161022 20:50:10 fridgecycle on rx2
- did a normal cycle, 4K temperatures still a bit elevated
- /home/keck/sch/runend2.sch
- weather: clear, haze, blowing snow
- windows and baffles: windows clear, very little snow on the baffles
- cycleFridge enable=2, on rx1,2,3,4
- recharged comp 1,2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_109.sch
- running without rx2
- 161020 10:01 unplanned power outage, for about 5min no significant warmup
- /home/keck/sch/runend2.sch
- weather: hazy, blowing snow
- windows and baffles:
- cycleFridge enable=2, on all rx
- missed first scansets because of rx2 slow cycle
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_108.sch
- mediator crashed, no alarm
- restarted gcp, masd
- 161019 03:06:42 schedule /home/keck/sch/mce_autotune.sch
- 161019 03:08:46 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_108.sch
- rx2 warming up just during last scansets
- /home/keck/sch/runend2.sch
- 161020 00:01:00 planned power outage for generator swap
- weather: mostly clear, blowing snow, haze
- windows and baffles:
- cycleFridge enable=2, on all rx
- rx2 cycle will take much longer again, FPU goes over 4K, 4K coldhead seems a bit warmer
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_107.sch
- rx2 coldhead about 0.5K warmer than the others, contamination!??
- /home/keck/sch/runend.sch
- weather: haze, mostly clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- cycle on rx2 unusally long, but pressure is good
- otherwise cycle doesn't look abnormal besides being longer?
- not gonna make the first scanset, rx2 still cooling down
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_106.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, haze, some snow, thin clouds
- windows and baffles: windows clear, some snow in and on the baffles
- cycleFridge enable=2, on all rx
- He leak in D Hi, swapped for spare line
- spduws1 froze, restarted gcp, masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_105.sch
- az-diff jump, had to readjust readhead 3A
- data are good after 161012 11:54:04 resume_schedule
- 161012 18:19:47 az fatal following error
- 161012 around 23:15 more fatal following errors
- looks like another busted gear box
- yes more broken gears !!!
- 161013 01:23:10 resume_schedule
- /home/keck/sch/runend.sch
- weather: mostly clear, some haze
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- recharged comp 4 leak!??
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_104.sch
- 161010 08:32:47 suspend_schedule
- az-diff jump, replaced readhead roller 4A
- 161010 08:55:00 resume_schedule
- 161010 13:08:08 el current drifting apart
- masd 0 stopped, had to reboot keck33
- 161011 11:41:08 fatal following error :(
- hope it is not starting again with mount problems
- /home/keck/sch/runend.sch
- weather: clearing, partly overcast
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- recharged comp 1,3,4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_103.sch
- /home/keck/sch/runend.sch
- weather: clear, overcast, blowing snow
- windows and baffles: windows clear, quite some snow in and on baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_102.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_101.sch
- /home/keck/sch/runend.sch
- weather: clear, getting overcast
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- today fridgecycle on rx1 takes normal time again
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_100.sch
- 161003 11:34:00 rx1 warming up
- so there was an influence from the fast fridge cycle (see below)
- /home/keck/sch/runend1.sch
- weather: clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- 161002 02:50:39 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- 161002 04:37:11 Exiting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- some unusual fast cooldown on rx1, but everything looks normal
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_099.sch
- problems with keckViewer and monitor
- did lose a bunch of data, no alarm/pager initiated
- /home/keck/sch/runend.sch
- weather: clear, cold, overcast, clearing
- windows and baffles: windows clear, litte snow on the baffles
- cycleFridge enable=2, on all rx
- running all 5 baffle heaters on one variac on minimal heat
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_098.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_097.sch
- /home/keck/sch/runend.sch
- weather: clear, mostly clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- recharged comp 2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_096.sch
- /home/keck/sch/runend.sch
- weather: high winds, blowing snow, overcast, clearing
- windows and baffles: windows clear, little snow in the baffles
- cycleFridge enable=2, on all rx
- el current started to drift apart
- some problems with the baffle heat, some strange cross conection between the 2 variacs
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_095.sch
- 160923 04:49:20 suspend_schedule, readhead roller B1 bearing ceased, replaced roller
- 160923 05:11:12 resume_schedule
- /home/keck/sch/runend.sch
- weather: mostly clear, wind picking up, blowing snow, high winds, overcast
- windows and baffles: windows clear, quite some snow in and on the baffles
- cycleFridge enable=2, on all rx
- recharged comp 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_094.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: windows clear, little bit of snow on the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_093.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: windows clear, very little snow on the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_092.sch
- masd4 stopped towards the end of the run
- rebooted keck37, restarted masd4
- /home/keck/sch/runend.sch
- weather: clear, blowing snow, mostly clear
- windows and baffles: windows clear, very little snow in the baffles
- cycleFridge enable=2, on all rx
- recharged comp 1,4
- el motor current drifted apart
- spudws1 froze, restarted gcp, masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_091.sch
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clearing
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_090.sch
- no pmac problems with fixed hand controller
- /home/keck/sch/runend.sch
- weather: mostly clear, wind picking up, blowing snow, overcast
- windows and baffles: windows clear, lots of snow in and on the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_089.sch
- /home/keck/sch/runend.sch
- installed fixed hand controller box, restarted keck31 several times
- restarted gcp and masd
- weather: clear, little hazy
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- reseated connectors on rx4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_088.sch
- /home/keck/sch/runend.sch
- weather: wind dying again, clear, cold
- windows and baffles: windows clear, some snow in and on baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_087.sch
- 160907 02:44 40s planned power outage, no impact on SPUD
- /home/keck/sch/runend.sch
- weather: clear, very cold, wind picking up, getting hazy
- windows and baffles: windows clear, lots of snow in the baffles
- cycleFridge enable=2, on all rx
- hand controller doesn't work with old and new cable
- omega0 power supply died (actually one of the new ones installed in July)
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_086.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- 160904 04:59:42 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 160904 09:20:25 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_085.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- recharged comp 1,2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_084.sch
- yeah no drive problems !! :)
- /home/keck/sch/runend.sch
- weather: mostly clear, some clouds
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- cycleFridge enable=2, on all rx
- pmac is behaving stranger and stranger
- replaced one Osborne roller (3A)
- pmac unresponsive, telescope locked out
- quite a few times the el motor current driffted apart as well
- 160931 removed keck31, took hand controller off
- pmac is running now, not sure yet what the cause was, but
- testing now, also during antenna/gcp restart, rx4 went into
- an undefined state and started warming up
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_083.sch
- 160828 09:52 pmac stopped, luckely before the runstart
- 160828 10:15 pmac stopped
- 160828 10:20 pmac stopped
- 160830 01:01 pmac stopped
- 160830 01:28 pmac stopped
- 160830 01:30 pmac stopped frequently
- 160830 02:38:28 abort_schedule
- /home/keck/sch/runend.sch
- weather: hazy
- windows and baffles:
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_082.sch
- pmac stopped (NOT fol error, didn't trip just stopped)
- 160827 08:12>pmac stopped (NOT fol error, didn't trip just stopped)
- and another time
- /home/keck/sch/runend.sch
- weather: clear, very hazy
- windows and baffles: windows clear, some snow on the baffles
- az movment not really possible any more
- most likely bad bearing on axis 2
- telescope will be unable to move in az for at least several days
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_081.sch
- pmac stopped several times
- now AGAIN pmac fatal fol error !!????
- telescopes moves fine with hand controller, nothing seems wrong
- el motot current starting to drift apart several times
- shimed key and keyway on az drive
- fatal following errors increasing
- swapped az motor for spare
- 160826 03:04:28 abort_schedule
- /home/keck/sch/runend.sch
- weather: clear, clear overhead
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_080.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_079.sch
- /home/keck/sch/runend.sch
- weather: overcast, clearing, clear, power plant exhaust in MAPO direction
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- indeed about 0.5degrees play on the key, about 25 degrees at the motor
- key was worn, but not as bad as last year, keyways looked ok
- swapped gearbox for a spare, current gearbox dosen't seem to run perfektly round
- el motot current starting to drift apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_078.sch
- period with fatal fol err, gonna check for play of the key during cycle
- /home/keck/sch/runend.sch
- weather: clear,l hazy, totally overcast, warm
- windows and baffles: windows clear, some snow on the baffles
- cycleFridge enable=2, on all rx
- el motor current starting to drift apart
- cycleFridge enable=2, on all rx
- el motor current starting to drift apart
- spudws 1 froze, gcp strange state, had to restart keck31
- had to restart fridgecycle
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_077.sch
- 160816 22:11 power outage
- 160816 22:13 power on again
- 160817 14:00 power outage for 2 min
- /home/keck/sch/runend.sch
- weather: clear, high winds, blowing snow, wind dying, clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- el motot current starting to drift apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_076.sch continued
- /home/keck/sch/runend.sch
- weather: clear overhead, blowing snow
- windows and baffles: clear
- single cycle since UC and IC started to run out
- cycleFridge enable=1, on all rx
- /home/keck/sch/mce_autotune.sch
- pmac stopped
- /data/keckdaq/autoqueue/pending/9_kCMB_50_076.sch
- 160814 21:53 power outage
- all receivers warmed up to about 350mK
- stopped masd and gcp, started to shut down computers
- 160814 22:23:53 power back on
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, clear
- cycleFridge enable=2, on all rx
- el motor current starting to drift apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_075.sch
- pmac stopped, fatal fol err on az
- /home/keck/sch/runend.sch
- weather: overcast, warm, hazy, wind picking up, blowing snow
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- el motor current starting to drift apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_074.sch
- pmac stopped, fatal fol err on az
- /home/keck/sch/runend.sch
- weather: clear overhead, high winds, blowing snow, wind dying, overcast
- windows and baffles: windows clear, very little snow on the baffles
- cycleFridge enable=2, on all rx
- recharged comp 1
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_073.sch
- /home/keck/sch/runend.sch
- weather: hazy, high winds, blowing snow
- windows and baffles: windows clear, quite some snow in and on the baffles
- cycleFridge enable=2, on all rx
- swapped bad line for new spare
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_072.sch
- pmac stopped, fatal fol err on az
- /home/keck/sch/runend.sch
- weather: clear, getting hazy, blowing snow, high winds
- windows and baffles: windows clear, quite some snow on all the baffles
- cycleFridge enable=2, on all rx
- pmac stops in previous run might be due to a faulty cable to the hand controller box
- cable is very old and should be replaced
- recharged comp 2
- 160806 06:33:57 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 160806 10:56:30 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_071.sch
- massive He leak in rx0, A Hi same again !
- 160806 00:20 pmac stopped, no errors ?????
- 160806 00:20 pmac stopped again, no errors ???
- swapped A hi to spare hose
- /home/keck/sch/runend.sch
- 160806 01:12 pmac stopped again, no errors
- rx0 FPU blow 300mk again
- weather: clear, wind picking up, blowing snow
- windows and baffles: windows clear, little bit of snow on the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_070.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, wind dying down, clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- recharged comp 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_069.sch
- /home/keck/sch/runend.sch
- weather: clear overhead, blowing snow
- windows and baffles: windows clear, some snow on the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_068.sch
- /home/keck/sch/runend.sch
- weather: clear overhead, blowing snow
- windows and baffles: windows clear, very little snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_067.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, clearing, clear overhead
- windows and baffles: windows clear, very little snow in the baffles
- cycleFridge enable=2, on all rx
- cycleFridge enable=2, on all rx
- swapped 5v power supply for syncbox
- problems with antenna layer
- had to restart keck31, took a while due to disk check
- fridge cycle aborted
- restarted gcp and masd several times
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_066.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, slight haze, blowing snow
- windows and baffles: windows clear,
- cycleFridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_065.sch
- masd1 stopped, restarted keck34, masd1
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: windows clear, little snow in and on the baffle
- cycleFridge enable=2, on all rx
- checked connectors, PS, all looks good
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_064.sch
- 160722 19:54:54 abort_schedule
- powercycled syncbox, 5V, MCEs
- 160722 20:01:41 Starting schedule: /home/keck/sch/mce_autotune.sch
- 160722 20:06:33 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_064.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- spudws froze
- restarted gcp, masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_063.sch
- 160719 13:09:36 abort_schedule
- noise from mce0 still exists, power cycled MCEs, 12V, syncbox and MCE computers
- restarted gcp, masd
- 160719 13:22:08 Starting schedule: /home/keck/sch/mce_autotune.sch
- 160719 13:25:26 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_063.sch
- mediator crashed
- 160719 16:21:41 abort_schedule
- 160719 16:23:26 Starting schedule: /home/keck/sch/mce_autotune.sch
- 160719 16:27:02 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_063.sch
- masd4 stopped, had to restart keck37 and masd4
- 160721 04:14:04 suspend_schedule
- pmac tripped, fatal fol error on az, obvious reason
- 160721 04:14:58 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_062.sch
- glycol pump switch without problems
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, wind dying, clearing
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- recharged comp 5
- power cycled mce0
- restarted masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_061.sch
- /home/keck/sch/runend.sch
- weather: haze, blowing snow, hazy
- windows and baffles: windows clear, quite some snow on and in baffles
- cycleFridge enable=2, on all rx
- el motor current driffting apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_060.sch
- /home/keck/sch/runend.sch
- weather: clear, haze, very hazy
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- recharged comp 1
- el motor current driffting apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_059.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_058.sch
- no problems during pump switch
- /home/keck/sch/runend.sch
- weather: clear, very hazy, hazy, clearing
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- 160709 08:17:49 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 160709 11:33:46 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_057.sch
- keck34 unresponsive, restarted keck34 and masd1
- 160707 12:19:05 Starting schedule: /home/keck/sch/mce_autotune.sch
- /home/keck/sch/runend.sch
- weather: hazy, clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_056.sch
- reset rx4 HK connectors
- 160705 12:36:57 Starting schedule: /home/keck/sch/mce_autotune.sch
- 160706 03:58:30 suspend_schedule
- az diff jump, bad bearing in readhead roller 2B (which was replaced 2 weeks ago with a new one)
- 160706 05:04:35 resume_schedule, data are good after resume schedule
- /home/keck/sch/runend.sch
- weather: clear, very hazy
- windows and baffles: windows clear, some snow in the baffles, quite some snow on the baffles
- cycleFridge enable=2, on rx1,2,3,4
- rx0 still cooling down slowly
- recharged comp 2
- cycleFridge enable=2, on rx1,2,3,4
- rx0 still cooling down slowly
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_055.sch
- 160703 around 20:00 glycol pump failure, warm up of all rx
- aborted run
- rx0 and rx1, warmed up to about 40K, cooldown is very slow, pumped on rx0,rx1 and rx4
- /home/keck/sch/runend.sch
- weather: clear, cold :)
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_054.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, clearing, clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_053.sch
- /home/keck/sch/runend.sch
- weather: blowing snow, hazy
- windows and baffles: windows clear, quite some snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_052.sch
- 160629 00:27:49 brown out
- and another brown out with a 1 sec power outage, no scansets were missed
- el motor currents drifting apart
- 160629 01:47:31 imminent power outage, stopped telescope
- 160629 01:50:18 stopped telescope. el motor current driffting
- power outage did not happen
- 160629 02:23:14 resume_schedule
- missed one scanset
- /home/keck/sch/runend.sch
- weather: blowing snow, clear overhead, hazy
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_051.sch
- 160625 16:40 keck36 was unresponsive, restarted keck36 and masd3
- 160625 23:58:42 masd1 crashed
- 160627 01:31:01 suspend_schedule, big az-diff jump, rehomed
- 160627 01:37:47 resume_schedule
- /home/keck/sch/runend.sch
- weather: mostly clear, blowing snow
- windows and baffles: windows clear, some snow in and on the baffles
- cycleFridge enable=2, on all rx
- replaced read head roller 2B
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_050.sch
- /home/keck/sch/runend.sch
- weather: clear, mostly clear, blowing snow
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- spud ws1 froze
- restarted gcp, masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_049.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: windows clear, very little snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_048.sch
- /home/keck/sch/runend.sch
- weather: overcast, hazy, clearing, clear
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_047.sch
- /home/keck/sch/runend.sch
- weather: hazy, overcast, blowing snow, warm
- windows and baffles: windows clear, lots of snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_046.sch
- power outage 160616 about 10:00
- power outage 160616 about 11:38
- besides the missed scan sets no further problems due to the outagaes
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow
- windows and baffles: windows clear, very little snow on the baffles
- cycleFridge enable=2, on all rx
- recharged comp 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_045.sch
- /home/keck/sch/runend.sch
- weather: clearing, clear, overcast, blowing snow, hazy
- windows and baffles: windows clear, lots of snow in and on baffle
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_044.sch
- /home/keck/sch/runend.sch
- weather: hazy, overcast, very warm, clearing
- windows and baffles: windows clear, lots of snow in and on baffles
- cycleFridge enable=2, on all rx
- recharged comp 1,2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_043.sch
- /home/keck/sch/runend.sch
- weather: getting hazy, overcast, blowing snow, hazy
- windows and baffles: windows clear, lots of snow in and on baffles
- cycleFridge enable=2, on all rx
- el motor currents drifting apart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_042.sch
- /home/keck/sch/runend.sch
- weather: clear, hazy, clear
- windows and baffles: windows clear, very little snow in and on the baffles
- cycleFridge enable=2, on all rx
- recharged comp 4
- 160607 10:57:50 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_041.sch
- brief power outage 160605 22:00
- el motor currents, driffting apart
- switched signalhound power supply
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- 160603 14:39:49 Starting schedule: /data/keckdaq/autoqueue/pending/1_keck_tcm_pidslow_test_001.sch
- 160603 15:44:59 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_040.sch
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clearing
- windows and baffles: windows clear, lots of snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_039.sch
- pager problems
- aborted run
- 160601 14:53:58 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_039.sch
- /home/keck/sch/runend.sch
- weather: hazy, overcast, blowing snow
- windows and baffles: windows clear, lots of snow in and on the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- check_rms gave 2.5 for rx4, reseated the connectors
- 160530 14:53:35 Starting schedule: /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_038.sch
- pmac tripped, problem with one of the back rollers, some piece of track got caught
- after removal, it works fine again, roller rotates freely
- el motor currents driffted apart
- /home/keck/sch/runend.sch
- weather: mostly clear, blowing snow, overcast
- windows and baffles: windows clear, quite some snow in the baffles
- cycleFridge enable=2, on all rx
- replaced bad He line with spare
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_037.sch
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clearing
- windows and baffles: windows clear, quite some snow in the baffles
- cycleFridge enable=2, on all rx
- el motor current started to drift apart
- /home/keck/sch/mce_autotune.sch
- 160526 15:13:58 Starting schedule: /data/keckdaq/autoqueue/pending/1_keck_tcm_pid_test_002.sch
- 160526 16:09:07 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_036.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- restarted spudws1, restarted gcp, masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_035.sch
- He leak in A-Lo, lost 100psi over course of a few hours
- rx0 was not working for reminder of run since the warm up to 350mk on the FPU
- swapped A-Lo for spare
- /home/keck/sch/runend.sch
- weather: some clouds, mostly clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- swapped bad He line for new spare
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_034.sch
- /home/keck/sch/runend.sch
- weather: haze, clearing, clouds, haze
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- lost 50 psi on comp 3, A Hi line leaked, was replaced with spare
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_033.sch
- /home/keck/sch/runend.sch
- weather: overcast, haze
- windows and baffles: windows clear, some snow in the baffles
- spudws1 froze, didn't start fridgecycle, only realized it after the cleaing
- restarted gcp, masd
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_032.sch
- 160519 around 17:50 keck34 stopped recording, masd1 was still running
- accidentally stopped masd2 as well for half a scanset
- keck34 came back after reboot and restart of masd1
- /home/keck/sch/runend.sch
- weather: very hazy, overcast
- windows and baffles: about a 3 to 4inch circle of snow on the center of windows, lots of snow in and on baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_031.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- el motor currents diverged
- recharged comp 2,4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_030.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- 160512 15:48:54 Starting schedule: /data/keckdaq/autoqueue/pending/1_keck_tcm_pid_test_002.sch
- 160512 16:54:03 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_029.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_028.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_027.sch
- /home/keck/sch/runend.sch
- weather: clear, mostly clear
- windows and baffles: windows clear, very little snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_026.sch
- /home/keck/sch/runend.sch
- weather: very hazy, blowing snow, overcast, warm, haze
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_025.sch
- masd4 didn't record restarted masd4
- 160504 16:22:12 schedule /home/keck/sch/mce_autotune.sch
- 160504 16:23:26 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_025.sch
- /home/keck/sch/runend.sch
- weather: clear, bowing snow, very hazy
- windows and baffles: windows clear, some snow in and on baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_024.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, some blowing snow
- windows and baffles: windows clear, very little snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- 160430 16:52:57 Starting schedule: /data/keckdaq/autoqueue/pending/1_keck_tcm_pid_test.sch
- 160430 17:23:06 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_023.sch
- /home/keck/sch/runend.sch
- weather: clear, some haze, clearing
- windows and baffles: windows clear, very little snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_022.sch
- /home/keck/sch/runend.sch
- weather: clear, haze, clear
- windows and baffles: windows clear, very little snow in the baffles
- cycleFridge enable=2, on all rx
- recharged compressor 1,4
- spudws froze, restarted gcp, masd
- problems with masd4, restarted keck37 and masd4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_021.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- recharged compressor 2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_020.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_019.sch
- /home/keck/sch/runend.sch
- weather: hazy and clouds, clear, hazy
- windows and baffles: windows clear, a little snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_018.sch
- /home/keck/sch/runend.sch
- weather: clear, haze, clouds, blowing snow
- windows and baffles: windows clear, lots of snow in the baffles
- cycleFridge enable=2, on all rx
- recharged compressor 3
- 160420 14:45:34 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 160420 18:21:50 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_017.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_013.sch‎
- 160416 18:12:21 abort_schedule
- clouds were moving in, was perfect until then
- 160416 18:12:54 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_016.sch
- /home/keck/sch/runend.sch
- weather:clear, mostly clear, clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_015.sch
- masd4 stopped for a few scansets in the last set of 10
- restarted keck37 and masd4
- /home/keck/sch/runend.sch
- weather: totally overcast, clearing clear
- windows and baffles: windows clear, lots of snow in and on baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_012.sch‎
- 160412 23:58:45 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_014.sch
- /home/keck/sch/runend.sch
- weather: clear, clouds, blowing snow
- windows and baffles: windows clear, little snow on the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- did some pager testing
- 160410 18:00:09 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_013.sch
- /home/keck/sch/runend.sch
- weather: thin clouds, blowing snow, clearing
- windows and baffles: windows clear, quite some snow in the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_012.sch
- /home/keck/sch/runend.sch
- weather: overcast, haze
- windows and baffles: windows clear, quite some snow in and on baffle
- cycleFridge enable=2, on all rx
- after homing el motor current started to drift apart, opened loops and closed them again
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_011.sch
- 160407 23:30 radio usage in MAPO due to a flase fire alarm
- 160408 04:11 started messing with gps card
- 160408 06:12 gps update successful, gps reading correct time
- run stopped with wrong time, but also did not continue after time was fixed
- 160408 06:59:54 abort_schedule
- had to restart gcp and masd
- 160408 07:08:11 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_011.sch
- 160408 12:38:46 abort_schedule
- /home/keck/sch/runend.sch
- weather: mostly clear, getting hazy, wind picking up again
- windows and baffles: windows clear, quite some snow in and on the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_010.sch
- 160405 about 20:00 keck36 bolos stopped, masd3 was still writing frames
- restarted keck36 and masd3, worked afterwards again
- /home/keck/sch/runend.sch
- weather: blowing snow, overcast, clearing, mostly clear
- windows and baffles: windows clear, quite some snow in and on baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_009.sch
- /home/keck/sch/runend.sch
- weather: haze, blowing snow, overcast
- windows and baffles:
- cycleFridge enable=2, on all rx
- recharged comp 2,4
- lowered the "wait all keck" time from 120s to 90s as Colin instructed
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_008.sch
- 160331 19:14:10 abort_schedule
- did some pager tests
- 160331 19:14:56 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_008.sch
- several missed scansets
- /home/keck/sch/runend.sch
- weather: clear overhead, some blowing snow, getting hazy, some perticipation
- windows and baffles: windows clear, very little snow in the baffles
- cycleFridge enable=2, on all rx
- el motor currents drifting apart
- spudws1 died, replaced with spudws2
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_007.sch
- about 160329 19:00 MAPO signalhound should work with proper power again
- 160330 13:13:45 abort_schedule
- updated TES biases for rx0, rx2
- 160330 13:13:45 Starting schedule: /home/keck/gcp/control/sch/config_hw.sch
- 160330 13:14:54 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_007.sch
- missed scanset again LST 1900 on second half
- spudws1 has some problems
- /home/keck/sch/runend.sch
- weather: clear, blowing snow, but clear overhead
- windows and baffles: windows clear, some snow in the baffles
- cycleFridge enable=2, on all rx
- restarted gcp, masd to have windows back on spudws1
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_006.sch
- daq froze up
- 160328 07:36:00 abort_schedule
- restarted gcp, masd
- 160328 07:38:24 Starting schedule: /home/keck/sch/mce_autotune.sch
- 160328 07:39:39 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_006.sch
- furnace in MAPO quit, building cooled substantially
- /home/keck/sch/runend.sch
- weather:little hazy, clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- recharged comp 3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_011.sch‎
- 160325 19:11:11 abort_schedule
- masd4 gives problems (every run except 004 !?)
- restart mce power, gcp and masd
- still problems
- rebooted keck37
- had to abort schedule several times
- 160325 19:33:05 Starting schedule: /home/keck/sch/mce_autotune.sch
- 160325 19:34:27 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_011.sch‎
- one scanset from 160327 12:10 lst is missing ??? no obvious problem with telescope
- /home/keck/sch/runend.sch
- weather: thin clouds,clearing, clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- recharged comp 1
- 160325 16:34:15 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_004.sch
- /home/keck/sch/runend.sch
- weather: clear, thin clouds, haze
- windows and baffles: windows clear, very little snow on the baffles
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_003.sch
- no sample bolos on rx4, although masd4 is running
- 160321 19:40:58 abort_schedule
- restarted sync box, gcp. masd
- 160321 19:50:16 Starting schedule: /home/keck/sch/mce_autotune.sch
- 160321 19:53:33 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_003.sch
- /home/keck/sch/runend.sch
- tried run 004, but it exited as well after the pager commands
- weather: blowing snow, overcast, clearing , clear
- windows and baffles: windows clear, very little snow in the baffles
- cycleFridge enable=2, on all rx
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_001.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_50_000.sch
- schedule stopped twice due to pager issues, commented out pager lines
- 160315 18:38:52 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_000.sch
- 160315 18:56:44 abort_schedule
- was still going for the last gallactic plane scan
- 160315 20:00:50 Starting schedule: /home/keck/sch/mce_autotune.sch
- 160315 20:02:13 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_50_000.sch
- rx0 baffle temp sensor reads high, it is about 30K over actual temperature
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
CMB 2016
- cycleFridge enable=2, on all rx
- cycleFridge enable=2, on all rx
- 160315 08:38:22 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- removed FFF
- compressors were off for less than 15min, rx0 warmed up most, to 25K on the FPU, was the only
- rx I had to pump on for 10 min, all cooling now nicely
- cycleFridge enable=4, on all rx
- 160314 19:34:47 restarted masd and gcp
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_016.sch
- weather: mostly clear, haze on horizon
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_016.sch
- weather: mostly clear, haze on horizon
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_016.sch
- weather: partly overcast, haze
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_016.sch
- weather: haze
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32i_015.sch
- weather: haze
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_015.sch
- weather: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31h_015.sch
- weather: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31g_015.sch
- weather: clear
- spudws 1 froze, restarted gcp, masd
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_016.sch
- weather: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_015.sch
- 160308 10:03:12 abort_schedule
- masd 3 stopped, would have probably been ok for this run due to the rx that are under the mirror
- weather: mostly clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_015.sch
- weather: mostly clear, getting colder
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_015.sch
- weather: mostly clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_015.sch
- weather: mostly clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_015.sch
- weather: mostly clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_015.sch
- weather: mostly clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_014.sch
- weather: clear, some haze on horizon
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32i_014.sch
- weather: clear, some clouds on horizon
- cycleFridge enable=2, on all rx
- recharged compressor 2 and 4
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31h_014.sch
- weather: clear, some clouds on horizon
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31g_014.sch
- weather: haze on horizon, clear above
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_014.sch
- weather: haze on horizon, clear above
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_014.sch
- weather: some haze on the horizon
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_014.sch
- weather: overcast, hazy
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_014.sch
- weather: overcast, hazy, warm
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_014.sch
- weather: overcast, hazy, warm
- cycleFridge enable=2, on all rx
- moved FFF to forward position
- A,B @ 15 in
- E,F @ 55.5 in
- G,H @ 29 in
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_014.sch
- weather: clear, some haze on the horizon
- cycleFridge enable=2, on all rx
- cycleFridge enable=2, on all rx
- cycleFridge enable=2, on all rx
- cycleFridge enable=2, on all rx
- didn't do mce_autotune since rx4 only cooled down to 350mk
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_013.sch
- 160227 04:06:01 abort_schedule
- keck37 crashed which was probably the reason for slightly elevated temp on rx4
- 160227 04:10:55 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_013.sch
- weather: blowing snow
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_013.sch
- Telescope wasn't moving, but no errors were displayed
- 160226 12:58:04 abort_schedul
- rehomed, no problems, restarted gcp and masd
- 160226 13:08:47 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_013.sch
- still would not track
- 160226 13:14:13 abort_schedule
- 160226 13:15:02 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_013.sch
- 160226 13:18:39 abort_schedule
- slewing would work by hand
- 160226 13:21:41 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_013.sch
- now it works again ???
- weather: blowing snow
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_013.sch
- weather: blowing snow
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_013.sch
- weather: blowing snow
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_013.sch
- weather: blowing snow
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_013.sch
- weather: blowing snow
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_013.sch
- weather: blowing snow
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32i_012.sch
- weather: blowing snow
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32h_012.sch
- weather: clear, clouds on horizon
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32g_012.sch
- weather: clearing
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_012.sch
- weather: hazy, overcast
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_012.sch
- weather: hazy, overcast
- cycleFridge enable=2, on all rx
- recharged compressor 1,3
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_012.sch
- weather: clear, some clouds on the horizon
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_012.sch
- weather: clear, few clouds on horizon
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_012.sch
- weather: clear, few clouds on horizon
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_012.sch
- weather: clear, clouds on the horizon
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32i_011.sch
- weather: mostly clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32g_011.sch
- weather: overcast, clearing
- cycleFridge enable=2, on all rx
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_011.sch
- weather: partly cloudy
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_011.sch
- weather: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32h_011.sch
- weather: clearing, wind dying down, clouds on the horizon
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_011.sch
- weather: blowing snow
160214 20:07:40
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_011.sch
- weather: hazy towards horizon, wind picking up, blowing snow
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_011.sch
- weather: clear, getting a bit hazy
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_011.sch
- weather: clear
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_011.sch
- weather: clear
- cycleFridge enable=2, on all rx
Winter 2016
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_011.sch
- aborted schedule, it had a 2h wait from the day before in it
- keck33 had problems, rebooted keck33
- restarted gcp, masd
- 160212 02:25:51 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_011.sch
- weather: clear
- cycleFridge enable=2, on all rx
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_011.sch
- 160211 18:49:02 abort_schedule
- finish work on membranes
- cycleFridge enable=2, on all rx
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_011.sch
- 8_fridgecycle.sch
- Double cycle on all rx
- 7_ffflat_dslmast_31e_011.sch
- dk=+166, rx4 under the mirror
- 24″ chopper on DSL mast. 16 Hz chop rate. Chop reference in antenna0.pmac.fast_aux_input[0]
- UC evap for rx0 ran out at ∼15:30:00
- UC evap for rx3 ran out at ∼16:45:00
- UC evap for rx1 ran out at ∼17:10:00
- Ran out of disk space on keck32:/data during this schedule. Appears to have happened while writing file 20160210_143022.dat.gz
- cycleFridge enable=4, rx=rx0+rx1+rx2+rx3+rx4
- FFF is installed
- changed compression to gzip for sat transfer
- Compressors off when we lowered elevation below 45 degrees.
- Mirror installation went smoothly. el motor currents stayed within ±10 A during the lift.
- Cooling back down. No need to pump on any receivers.
- Moved mirror into back position for beam mapping. Final rod measurements:
- A = 23.4375″
- B = 23.625″
- E = 57.5625″
- F = 57.5″
- G = 25.125″
- H = 25.25″
- Took some additional mirror measurements (see calibration hardware logbook).
- Recycling voltage range used last year for 220GHz
- added rx0 and rx2 back into set_default_hardware()
- cycleFridge enable=2, rx=rx2
- Cycled rx2 only.
- cycleFridge enable=2, rx=rx0+rx1+rx3+rx4
- rx2 is still too warm to cycle
- Loaded receivers from MAPO into the Keck mount. First K1 (rx2) then K3 (rx0). Both receivers have been upgraded from 95 GHz to 220 GHz.
- rx2 filled up with gas after warming up during the loading process. Pressure got as high as ∼1 mbar. Put cryostat on turbopump and pressure has come down steadily. Still need to assess whether it was a leak or just outgassing. Temperatures are much higher now in rx2 than other receivers. Will take a while to cool back down.
keckdaq Run 8 (Rx0, Rx1, Rx2, Rx3, Rx4; Jan 15 2015 - Feb 5 2016)
LINKS:
keckdaq Run 9 |
keckdaq Run 7 |
keckdaq Run 6 |
keckdaq Run 5 |
keckdaq Run 4 |
keckdaq Run 3 |
keckdaq Run 2 |
keckdaq Run 1 |
keckdaq Run 0 |
mapodaq (summer lab tests)
-
- Keckycal Angle Tests:
- Weather doesn't matter, except it's -35 deg C.
- Weather is mostly clear. Was hazy earlier today. -36.7 to -37.1 deg C
- 160205 03:11:20 Start schedule keckycal_angle_tests.sch
- 160205 04:45:24 Exiting schedule keckycal_angle_tests.sch
- 160205 ~05:05:00 slewed Rx4 back to +30 degrees from bottom of drum to retake measurements. This time, the encoder and protractor agreed much better.
-
- Keckycal Consistency tests:
- Keckycal's encoder tape had fallen off the spring mount. Brought inside and remounted.
- Weather is mostly clear. Was hazy earlier today. -36.7 to -37.1 deg C
- 160204 01:19:14 - Start keckycal_001.sch on Rx4 (Al). This is consistency test 6 where the rotating stage of the Keckycal has been disassembled and reassembled except for the bearing to modified big plate. Incidentally, the encoder tape had to be remounted on the spring mounts, and I adjusted the joint to a higher height than before.
- 160204 02:06:38 - Start keckycal_001.sch on Rx4 (Al). This is consistency test 7 where the data were taken at +90 degrees in az from where the rest of the data have been taken (including el nods).
- Weather is clear and -36.9 deg C, even though it was down to -38 before I came back to Mapo and got down to -37.4 by the end of the measurement.
- 160204 07:13:59 - Start keckycal_001.sch on Rx4 (Al). This is consistency test 8 where the dielectric sheet has been replaced. This also means the sheet holder has been removed and reinserted into the bucket. Everything else is set up as in the normal data.
- Copied keckycal_001.sch into autoqueue/done/ folder for transfer north.
-
- fridgecycle.sch
- Fridge cycle stalled due to gcp crash. After numerous gcp resets, we restarted the fridge cycle at 160129 14:35:58. Completed one He4 cycle but then stalled for unknown reason. Aborted and restarted the fridge cycle at 160129 22:15:43.
-
-
- See extensive notes in gcp log
-
-
- See extensive notes in gcp log
-
- 160124 04:31:52 FTS: we're back and going to redo Ti4 and 3
- 160124 04:46:33 FTS: K2, dk=45, 300sps, 4 halfscans, Ti4 Ptg5, start
- 160124 04:46:50 FTS: neeeever mind
- 160124 04:47:19 FTS: K2, dk=45, 300sps, 4 halfscans, Ti4 Ptg5, start (again, for real)
- 160124 04:48:34 FTS: eh let's just redo tile 4, I think 3 was just fine
- 160124 04:57:11 FTS: K2, dk=45, 300sps, 4 halfscans, Ti4 Ptg5, stop
- 160124 05:03:29 FTS: rotated to dk=315, 1+ axis over tile 2
- 160124 05:12:02 FTS: K2, dk=315, 300sps, 4 halfscans, Ti1 Ptg 5, start
- 160124 05:21:53 FTS: K2, dk=315, 300sps, 4 halfscans, Ti1 Ptg 5, stop
- 160124 05:27:56 FTS: K2, dk=315, 300sps, 4 halfscans, Ti2 Ptg 5, start
- 160124 05:37:49 FTS: K2, dk=315, 300sps, 4 halfscans, Ti2 Ptg 5, stop
- 160124 05:38:04 FTS: dinner break, should be less than an hour so we'll stay biased
- 160124 06:41:16 FTS: K2, dk=315, 300sps, 4 halfscans, Ti3 Ptg 5, start
- 160124 06:51:10 FTS: K2, dk=315, 300sps, 4 halfscans, Ti3 Ptg 5, stop
- 160124 06:54:10 FTS: K2, dk=315, 300sps, 4 halfscans, Ti4 Ptg 5, start
- 160124 06:59:39 FTS: stop, pointing was wrong, redo
- 160124 07:00:19 FTS: K2, dk=315, 300sps, 4 halfscans, Ti4 Ptg 5, start
- 160124 07:10:13 FTS: K2, dk=315, 300sps, 4 halfscans, Ti4 Ptg 5, stop
- 160124 07:10:44 FTS: DONE WITH K2
-
-
- See extensive notes in gcp log
-
-
- 160123 01:23:55 FTS: and we're back...turned on Al biases and we're still rising
- 160123 01:24:08 FTS: may not have time for a whole lot before the fridge is exhausted
- 160123 01:25:18 FTS: K2, dk=0, 300sps, 4halfscans, Ti3 Ptg1, start
- 160123 01:35:10 FTS: K2, dk=0, 300sps, 4halfscans, Ti3 Ptg1, stop
- 160123 01:36:23 FTS: K2, dk=0, 300sps, 4halfscans, Ti3 Ptg3, start
- 160123 01:46:13 FTS: K2, dk=0, 300sps, 4halfscans, Ti3 Ptg3, stop
- 160123 01:48:00 FTS: K2, dk=0, 300sps, 4halfscans, Ti3 Ptg5, start
- 160123 01:57:52 FTS: K2, dk=0, 300sps, 4halfscans, Ti3 Ptg5, stop
- 160123 01:58:00 FTS: refill LN2
- 160123 02:03:00 FTS: K2, dk=0, 300sps, 4halfscans, Ti3 Ptg7, start
- 160123 02:12:51 FTS: K2, dk=0, 300sps, 4halfscans, Ti3 Ptg7, stop
- 160123 02:14:25 FTS: K2, dk=0, 300sps, 4halfscans, Ti3 Ptg9, start
- 160123 02:24:17 FTS: K2, dk=0, 300sps, 4halfscans, Ti3 Ptg9, stop
- 160123 02:26:25 FTS: looks like the fridge blew in the last scan
- 160123 02:26:35 FTS: cycle and come back in 6 hours for an epic all-nighter!
-
- 160122 16:53:47 FTS: K2 on the mount
- 160122 16:53:57 FTS: finished pointing on all 4 tiles, looks decent
- 160122 16:54:05 FTS: refill LN2
- 160122 17:12:11 FTS: K2, dk=0, 300sps, 4halfscans, Ti1 Ptg1, start
- 160122 17:22:02 FTS: K2, dk=0, 300sps, 4halfscans, Ti1 Ptg1, stop
- 160122 17:24:02 FTS: K2, dk=0, 300sps, 4halfscans, Ti1 Ptg3, start
- 160122 17:33:55 FTS: K2, dk=0, 300sps, 4halfscans, Ti1 Ptg3, stop
- 160122 17:36:31 FTS: K2, dk=0, 300sps, 4halfscans, Ti1 Ptg5, start
- 160122 17:46:23 FTS: K2, dk=0, 300sps, 4halfscans, Ti1 Ptg5, stop
- 160122 17:47:58 FTS: refill LN2
- 160122 17:52:01 FTS: K2, dk=0, 300sps, 4halfscans, Ti1 Ptg7, start
- 160122 18:01:55 FTS: K2, dk=0, 300sps, 4halfscans, Ti1 Ptg7, stop
- 160122 18:03:18 FTS: K2, dk=0, 300sps, 4halfscans, Ti1 Ptg9, start
- 160122 18:13:10 FTS: K2, dk=0, 300sps, 4halfscans, Ti1 Ptg9, stop
- 160122 18:14:46 FTS: K2, dk=0, 300sps, 4halfscans, Ti2 Ptg1, start
- 160122 18:24:38 FTS: K2, dk=0, 300sps, 4halfscans, Ti2 Ptg1, stop
- 160122 18:24:57 FTS: refill LN2
- 160122 18:28:55 FTS: K2, dk=0, 300sps, 4halfscans, Ti2 Ptg3, start
- 160122 18:38:49 FTS: K2, dk=0, 300sps, 4halfscans, Ti2 Ptg3, stop
- 160122 18:40:32 FTS: K2, dk=0, 300sps, 4halfscans, Ti2 Ptg5, start
- 160122 18:50:24 FTS: K2, dk=0, 300sps, 4halfscans, Ti2 Ptg5, stop
- 160122 18:51:52 FTS: K2, dk=0, 300sps, 4halfscans, Ti2 Ptg7, start
- 160122 19:01:46 FTS: K2, dk=0, 300sps, 4halfscans, Ti2 Ptg7, stop
- 160122 19:02:41 FTS: K2, dk=0, 300sps, 4halfscans, Ti2 Ptg9, start
- 160122 19:12:33 FTS: K2, dk=0, 300sps, 4halfscans, Ti2 Ptg9, stop
- 160122 19:14:54 FTS: super tired, going to sleep for a bit
-
-
- Weather is cloudy from horizon to about el=15, clear overhead -29.1 deg Celsius.
- These are consistency tests on Rx4
- First test is to run the schedule twice without disassembling the Keckycal.
- 160121 02:55:22 Start schedule keckycal_001 on Rx4 (Al), test 1
- 160121 03:34:07 Started schedule keckcal_001 on Rx4 for test 2, but GCP crashed.
- 160121 04:40:43 Started schedule keckycal_001 on Rx4 again for test 2 where the Keckycal was not disassembled.
- Weather still clear, except on horizon.
- Rotated bucket by 2 screw holes (CW when viewed from above) w.r.t encoder tape from where all previous 2016 measurements were made (80 degrees). But the rest of the Keckycal remained unchanged. This is test 3.
- 160121 07:20:12 start schedule keckycal_001 on Rx4 for consistency test 3
- Consistency test 4 was going to be to take Keckycal off Rx4 and put it back on, but that has already been accomplished between today and yesterday.
- For consistency test 5, the bucket has been clocked back to previous position with respect to the encoder tape.
- 160121 08:26:35 start schedule keckycal_001 on Rx4 for consistency test 5. This is taken with Rx4 20 degrees (in dk) from bottom of the drum.
- Took Keckycal off mount to make way for FTS
-
-
- Weather is clear, -29.5 deg Celsius.
- Keckycal on Rx1 with Ti biases. Membrane inflated slightly this time. Also manually slewed to el=60 before leading elnods, but even in the 4-minute wait, the fpu temp was completely stable. Before taking final protractor measurements, dropped and recalibrated protractor.
- 160119 20:39:30 Start schedule keckycal_001.sch on Rx1.
- MAPO mast was up. Redoing Rx1 in case it messed up the elnods.
- 160119 22:09:13 Start schedule keckycal_001.sch on Rx1.
- Encoder counts per revolution weren't consistent. Moved readhead slightly closer to tape and rotated 16 times while at lunch. The starting ref capture minus the ending ref capture was 6412800, which is divisible by the correct number of counts per rev of 400800 (for the spring mounted tape).
- 160120 00:35:18 Start schedule keckycal_001.sch on Rx1, again (on Ti).
- 160120 02:00:00 Start schedule keckycal_001.sch on Rx3 (Ti).
- 160120 03:09:42 Start schedule keckycal_001.sch on Rx4 (Ti).
- Before and after angle vs encoder positions diaggreed by 0.1 deg, so redoing.
- 160120 03:49:16 Start schedule keckycal_001.sch on Rx4 (Ti).
- 160120 04:21:03 Ran config_hw_Al.sch
- 160120 04:30:56 Start schedule keckycal_001.sch on Rx4 (Al). Started schedule before fpu equilibrated. Manually slewed to el=60 after protractor measurements to wait for fpu to stabilize. Was close to stable after 20 minutes, when I started elnods.
- 160120 07:31:35 Start schedule keckycal_001.sch on Rx3 (Al). there were skips during elnods and rotation data on this run.
- 160120 08:22:13 Start schedule keckycal_001.sch on Rx3 (Al).
- Thin clouds moved in overhead.
- 160120 09:19:16 Start schedule keckycal_001.sch on Rx1 (Al). The before and after angles disagreed by more than 0.1 deg. So will redo in the morning
- 160120 21:34:11 Start schedule keckycal_001.sch on Rx1 (Al). Weather: clouds in sky, but clear above elevation=60 or better.
-
-
- Weather is clear, -29 deg Celsius.
- Keckycal on Rx3.
- 160119_02:54:59 Start schedule keckycal_001.sch on Rx3. After taking protractor measurements, manually slewed to 60 deg elevation to let focal plane stabilize before entering the elnod portion of the schedule. That took 11 minutes.
- 160119 04:37:09 Start schedule keckycal_001.sch on Rx1. Nitrogen purge off, but membrane is tight. Also manually slewed to el=60 before leading elnods.
-
-
-
- Weather is clear
- Keckycal on Rx4. Dielectric Sheet has small wrinkle toward edge
- 160117 04:45:44 Start schedule sch/keckycal_001.sch
- 160118 04:25:39 Start schedule sch/keckycal_001.sch. Keckycal on Rx4. Dielectric sheet replaced, but still a small wrinkle toward edge, but in a different location. It's close to the semi-minor axis. Weather is clear. Accidentally started rotating before schedule was ready, will only use the part of the data where the feature bit is set
- 160118 07:42:57 Start schedule sch/keckycal_001.sch. On Rx4, again. Keckycal has same installation as previous run at 04:25:39. Weather still clear. -31 deg Celsius.
- Noticed Dielectric sheet flapping slightly in the wind when taking protractor measurements. Too tight?
- 160118 08:41:02 Start schedule sch/fridgecycle.sch (so that system is set to a known state with TES biases off)
-
- cycleFridge enable=2, rx=rx1+rx3+rx4
-
- cycleFridge enable=2, rx=rx1+rx3+rx4
-
- Weather is overcast
- Temporarily modified set_default_hardware in schedlib.sch to set default rx=1+3+4 and default mce=1+3+4
- 160114 02:07:01 - config_hw_Al.sch to set up Al biases for keckical
- 160114 02:42:16 - mce_autotune.sch because we realized that previous last tuning was from Jan 3
- 160114 02:50:21 - config_hw_Al.sch back to Al biases
- 160114 04:10:00 or so: homed the mount
- 160114 08:06:32 - 08:25:35 took blanking plate off Rx4 to see weather coherence across focal plane. Slightly hazy, but can see blue over head. Telescope at Zenith. Data marked with feature bit 6.
-
- spudws1 died due to hard drive failure. The gcp xterms were all running via ssh from this computer, so that stopped gcp. We restarted it from one of the other spud workstations that is not dead.
-
- cycleFridge enable=2, rx=rx1+rx3+rx4
-
- Noticed around 2016-01-11 22:04:37 that antenna layer registers (housekeeping, mount) were not updating in keckViewer.
- Tried restarting gcp and got an error with the Blastbus PCI card.
- Couldn't run the usual gcp/modules/keck/bbc_load script on keck31 because no one here knows the root password! Instead we soft-rebooted keck31 and it came back up in a good state.
-
- cycleFridge enable=2
- Ended up doing a quadruple-cycle
-
- cycleFridge enable=2, rx=rx1+rx3+rx4
- Ended up doing a triple-cycle
-
- Took rx2 out of the mount and moved it into MAPO to replace 95 GHz focal plane E9 with 220 GHz focal plane E11
-
- cycleFridge enable=2, rx=rx1+rx2+rx3+rx4
- Ended up doing a quadruple-cycle
-
-
- cycleFridge enable=2, rx=rx1+rx2+rx3+rx4
- Ended up doing a quadruple-cycle
-
- Took rx0 out of the mount and moved it into MAPO to replace 95 GHz focal plane E6 with 220 GHz focal plane E10
-
- rf_bonanza.sch
- Kirit to add details
-
-
- rf_bonanza.sch
- Kirit to add details
-
- 151214 11:01:27 /data/keckdaq/autoqueue/pending/9_kCMB_49_142.sch
- CMB schedule being run with forebaffles off!
- Weather: Clear, mostly clear
- Recharged compressors 2,3,4,5 which had all been slowly falling in pressure over many weeks.
- Aborted schedule at 151215 02:13:38
-
- 151204 05:40:49 /data/keckdaq/autoqueue/pending/9_kCMB_49_142.sch
- 151204 21:45:53 abort_schedule
- Investigating el motor B PMAC control; doesn't follow el motor A well due to no motor encoder feedback.
- 151204 21:55:00 Shutdown keck31 to poke around with PMAC cables.
- 151204 22:09:52 keck31 back up; restarted GCP and masd daemons.
-
- 151202 23:59:34 /home/keck/sch/fridgecycle.sch
- With much difficulty, managed to pull 3 new cables through the azimuth wrap.
- Switched encoder #2 to run through one of new cables.
- Test scans show no az-diff jumps. Test further with CMB schedule.
-
- az-diff jump during the night
- 151201 01:49:27 abort_schedule 9_kCMB_49_141.sch
- Switching #2 encoder to spare within az wrap cable does no better.
- Strung temporary cable down the ladder to bypass az-wrap completely. Will test az-diffs overnight.
- 151201 08:36:49 /data/keckdaq/autoqueue/pending/9_kCMB_49_141.sch
- Fridge ran out during cycle.
-
- 151130 00:34:14 /home/keck/sch/fridgecycle.sch
- Looks like az wrap cable for readhead 2 may be intermittently flaky -
after messing with cables seems problem has become less frequent.
- Then found az home was going to tape gap magnet instead
of index mark!
- Readhead 1A (RH1A) had been swapped (see below) in debug process
for RH2A.
- After extensive messing around turns out only some of the readheads
can see the (partially eroded) index mark. (If they can't it trucks
on by and takes the tape gap magnet as the “index”.)
It is possible that data has been taken with this false zero point.
However, unlikely as such a run would be probably hit the hard limit.
- Finally have it working with an odd man out wheel on RH1A.
Stick with this for the moment to try and get some star pointing.
- 151130 08:00:06 /home/keck/sch/starpoint_pole_keck_summer.sch
- Found most of the summer stars; skipped few on first deck angle when
too bright.
- 151130 09:57:27 Attempt at second star pointing to increase az
coverage due to sky rotation. Did not succeed.
- Attempt a CMB schedule.
- 151130 10:59:42 /data/keckdaq/autoqueue/pending/9_kCMB_49_141.sch
-
- 151126 17:50:49 /home/keck/sch/fridgecycle.sch
-
- Seems that mediator stopped. Restarted GCP.
- /home/keck/sch/fridgecycle.sch
- 151124 23:37:23 Mediator stopped again, and antenna card in some
weird state. Rebooting both keck31 and keck32 to be sure to get
system back to normal state.
- 151125 00:00:43 Investigate compressor 3 leaking He still.
- Identified leaking line in az wrap, but apparently mistraced it to
A-HI; in fact, connected as A-LO.
- Another line swap; return AW33-2015-05 to use as A-LO, AW33-2015-06
still in use as A-HI, and AW33-2015-02 now ready to be pulled and
replaced once spares arrive.
- Recharged compressor 3.
- 151125 00:28:05 Replaced membrane nitrogen bottle.
- 151125 00:43:20 Feel stupid --- managed to lock myself out of
keck32 due to trying to login too many times with a typo in the
user name. Removed block on spudws1 from fail2ban rules.
- windows and baffles: clear
-
- Trying to adjust the Osborns (rollers on outer edge of az track)
to keep the mount centered and eliminate the walk.
- Baseline measurements of motor current taken to ensure mount is
not over-constrained and stressing the motor more
- John found bolts holding azimuth motor had started to loosen; Robert
had checked after PMAC “freak-out”, but appears to have
loosened since then.
- Sugest that the bolts be Lock-Tite'd to keep from loosening
again.
- Starting with Osborns on wheels #2 and #4.
- Take mount to az -lim; then slew +90 deg to hopefully center the
mount w.r.t. #2 (where motor is located) and #4.
- 151120 23:21:47 Find to pretty well centered, judging by encoder B
assembly bracket gap to the azimuth track.
- Adjusting Osborns to maintain the position.
- 151121 23:32:16 Noticed compressor 3 pressure too low. Re-charged.
Need to investigate for another possible leak and/or confirm we
swapped the correct line.
- 151121 00:29:25 /home/keck/sch/fridgecycle.sch
- Found that while 2A encoder shim was machined thinner, the bolt heads
on rest of the encoder assembly forgotten; caused spring to bind.
Shaved height with a file.
- Finished re-adjusting all encoder heads.
- 151121 03:31:10 /home/keck/sch/az_test.sch
- az-diff jump very quickly into the schedule.
- Further troubleshooting with 60deg scans show additional az-diff
jumps. Reasonable to assume alignment not the primary cause.
-
- Setting up to attempt a star pointing. May not work due to high
light clouds, but clearest day we've had in a long time.
- 151119 00:54:34 /home/keck/sch/starpoint_pole_keck_summer.sch
- 151119 00:59:02 abort_schedule due to too much light still.
- Attempting to add rolled-up volara to extend cardboard tube as
make-shift baffle.
- Clouded over too much for a star pointing; see only white in the
grabber and TV screen. Will have to wait for later.
- 151120 02:43:15 restart GCP since nothing was updating. Might have
been a mediator crash?
-
- Swapped guide wheel on encoder 2A with spare from cabinet. No
improvement, still find az-diff jumps.
- May be able to avoid issue if problem area can be pinned down to
a single location &emdash; could add magnet to cause B encoders
to read instead.
- Right now, still far too much uncertainty in location to be able
to use a “gap magnet” as a work-around.
- Switched A-HI line (AW33-2015-05) for spare already in the mount
(AW33-2015-06).
- Star camera baffle ready for next sunny day. Weather predictions
suggest may be several days yet.
- 151118 09:27:38 cycleFridge enable=2, on all rx
- weather: blowing snow and cloudy
- windows and baffles:
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_140.sch
- 151116 05:48:21 aborted schedule since az-diff jumps don't seem
to be solved yet.
- /home/keck/sch/runend.sch
- Swapped the encoders between 1A and 2A to identify if skips follow
the encoder or the position.
- Restarted CMB schedule 9_kCMB_49_140.sch as test run.
- Within first scanset, az-diff jumped again. Differences indicate
that encoder position 2A is still the source of problem. (So must
be symptom of the #2 wheel and/or #2 encoder assembly rather than
the encoder itself.)
- Removed two N2 bottles for retro from compressor room;
brought up new bottle for spare.
- 151116 02:07:33 Setting up for another observation test to see if
can notice any physical effect correlated with az-diff jumps.
- Justin and Rachel in mount, watching as scans proceed.
- Light stays green on encoder throughout, so no obvious location.
- Found large “burr” on top surface of az ring. Removed.
No improvement.
- See that guide wheel may still be binding at one particular
spot (away from where Justin & John added tape shim).
- recharged compressor #3 again. Will swap for spare line tomorrow.
- weather: clear, then cloudy
-
- cycleFridge enable=2, on all rx
- 151115 22:45:00 Justin and John finish inspecting and moving dk
off the hard limit.
- Takes a few minutes to realize an E-stop had been pressed
- Once released, dk motion still not smooth.
- Shutdown keck31 (antenna0) and removes power to fully reset
PMAC card. (Only shutdown computer yesterday, so PMAC still under
continual power.)
- 151115 23:45:05 Re-homing completed
- 151115 23:43:29 /home/keck/sch/az_test.sch
- 151116 00:28:00 abort_schedule after az-diff jump
- 151116 02:24:45 Testing while sitting in mount. Saw nothing, and no
az-diff jumps.
- Going to try running remaining portion of next CMB schedule
-
- Replaced azimuth encoder #2A with (used?) spare found in
supply cabinet.
- Two types in box: short and long data cables. Chose long cable
since all other in mount also long.
- 151114 03:06:33 schedule /home/keck/sch/az_test.sch
- az-diff jumps again.
- John noticed that encoder roller riding too low. Light pressure
on top could cause encoder to “turn red”.
- Shimmed encoder on opposite side with thin strip of aluminum tape
to get roller to ride higher.
- 151114 22:23:34 started fridge cycle
- Justin and Rachel adjust #2B in same way as #2A.
- Returned to original encoder #2A when noticed the replacement encoder
much more sensitive to scratches in encoder tape.
- Re-adjusted encoders #1 and #2 until green around full circle.
- Attempted to re-home, but mount stopped.
- 151115 02:02:01 restarted PMAC computer, and restarted GCP software
to see if another PMAC-error without using the hand-box.
- Mount still wouldn't move, and dk [soft] limit switch set on PMAC
page.
- See in compressor room that dk hard limit switch set; LEDs off on
indicator panel in rack.
- Traced as much cabeling as possible. No sign that any connections had
come loose.
- Inspecting limit switches, deck drum paddles in contact with both
soft and hard limit switches on CW side of the mount.
- Justin unsure how to proceed on own, emailing Robert and discussing
with John.
- 151115 06:52:38 Notice that only rx0 fridge is cold. With Kimmy's
help interpreting, learn that GCP restart stalled the fridge cycle.
Re-run the fridge cycle.
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kcmb_49_139.sch
- /home/keck/sch/runend.sch
- 151113 05:13:16 begins a series of az-diff jumps that kept
stalling the telescope
- repeated attempts at cleaning track, cleaning encoders w/ dry
nitrogen, re-homing...
- visual inspection shows nothing unique to approx -105deg on
the azimuth encoder, but jumps consistently occur on only
encoder #2 around that point
- 151113 09:03:12 another az-diff jump; fallen far behind, so aborted
schedule
- re-home, then run /home/keck/sch/az_test.sch for a few cycles
- no sign of touble in az_test schedule; returning to CMB
- 151113 10:04:43 scans resumed in different azimuth position;
running without issue thus far
- 151113 19:05:31 another az-diff overnight while sleeping; re-homed
and resumed
- Few more scansets in phase C, but switch to phase D caused
mount to slew back to problem area. Very quickly az-diff jumped
- 151109 04:18:37 - PMAC freaked out; caused first scan set to be skipped
- Swapping D-LO for spare to isolate possible leak
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_136.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, then very overcast with lots of blowing snow
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_135.sch
- masd 4, stopped, restarted masd
- 151105 05:02:31 Starting schedule: /home/keck/sch/mce_autotune.sch
- 151105 05:04:07 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_49_135.sch
- antenna on keck31 quit
- restarted gcp and masd
- 151105 18:29:30 Starting schedule: /home/keck/sch/mce_autotune.sch
- something crashed again, and aborted schedule, I was in the station when it happend and could not see the full extent from
- the computer there, but it wouldn't autotune and now rx2 started to warm up, I will do a single cycle and try to figure out
- what is wrong with masd1 and why it's crashing autotune and the run, maybe it just doesn't like summer...
- HS values are at high values some up to 80K so I expected the other rx to warm up soon as well
- 151106 07:31:36 Starting schedule: /home/keck/sch/fridgecycle.sch
- still problems with masd1 keck34, will restart run without rx1
- 151106 10:48:03 Starting schedule: /home/keck/sch/mce_autotune.sch
- 151106 10:49:58 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_49_135.sch
- pmac stopped again, same thing as last time - could not be restarted swapped, showed open loops and would trip as soon as I moved
- az, swapped for suspect drive amp from 2012 and it worked again !!????
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clearing, mostly clear, wind died down
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 1,2,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_134.sch
- problems with keck 33, unresponsive had to reboot computer
- 151103 08:47:13 Starting schedule: /home/keck/sch/mce_autotune.sch
- 151103 08:48:55 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_49_134.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, clear, overcast, blowing snow
- windows and baffles: windows clear, some snow in the baffles
-
- sorry, I screwed up and didn't put the runend and fridgecycle schedules into the queue in time !!
- cycleFridge enable=2, on all rx
- recharged comp 1
- tried star pointing with different baffles, but couldn't see first star, AlpCar
- only later I could see it again, but it was too late for a star pointing
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_133.sch
- az-diff drifted again, reset pmac
- 151102 20:20:56 resume_schedule
- /home/keck/sch/runend.sch
- weather: blowing snow, thin clouds, clearing, wind dying
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- not clear enough for star pointing
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_132.sch
- pmac stopped again, this time it couldn't be restarted
- az drive amp 1 was swapped with the unused from second az drive
- /home/keck/sch/runend.sch
- weather: blowing snow, thin clouds
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_131.sch
- pmac stopped again, and yes it was again during my sleep, so I won't know
- until I get up
- /home/keck/sch/runend.sch
- weather: thin clouds, wind picking up haze overcasted
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 1,3
- all receivers cold again rx2 had an additional single cycle just before the normal cycle
-
- /home/keck/sch/mce_autotune.sch
- starting run 130 on rx0,1,3,4
- /data/keckdaq/autoqueue/pending/9_kCMB_49_130.sch
- 151027 23:24:37 abort_schedule
- /home/keck/sch/runend.sch
- weather: thin clouds
- windows and baffles: clear
-
- cycleFridge enable=2, on rx 0,1,3,4
- rx2 still recovering
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_130.sch
- massive power outage 151026 18:05
- /home/keck/sch/runend.sch
- weather: thin clouds
-
- cycleFridge enable=2, on all rx
- recharged comp 1,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_129.sch
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, warm, clearing a bit, blowing snow
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_128.sch
- spudws crashed, restarted gcp, masd
- 151022 07:55:41 Starting schedule: /home/keck/sch/mce_autotune.sch
- 151022 07:59:03 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_49_128.sch
- /home/keck/sch/runend.sch
- weather: hazy, slight overcast, wind picking up, warm, blowing snow, totally overcasted
- windows and baffles: windows clear, lot of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_127.sch
- /home/keck/sch/runend.sch
- weather: hazy
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 1,4
- might have a problem after all!?
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_126.sch
- az-diff drift just over 30k at the last scanset up to 40k
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, haze, snow
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_125.sch
- sorry, missed the first scanset, was shoveling on the roof
- /home/keck/sch/runend.sch
- weather: overcast, snow, clearing, overcast, clearing
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- pmac stopped at one point after az_test.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_124.sch
- az-diff jump
- 151015 07:37:43 resume_schedule
- pmac stopped
- 151015 17:47:36 resume_schedule
- /home/keck/sch/runend.sch
- weather: hazy, overcast, snow
- windows and baffles: windows had a tiny amount of snow in the center, quite some snow in and on the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 1,4
- might have a problem here, since they were just recharged!?
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_123.sch
- rx1 warmed up early to 0.5K might be due to starpointing during last cycle
- /home/keck/sch/runend1.sch
- weather: clear, getting hazy
- windows and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 3
- 151012 02:52:59 Starting schedule: /home/keck/sch/starpoint_pole_keck_summer.sch
- limited success, couldn't see all the stars, sometimes camera was saturated by sunlight
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_122.sch
- /home/keck/sch/runend.sch
- weather: blowing snow, hazy, clearing, wind dying, clear
- windows and baffles: clear, only D had a tiny bit of snow on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_121.sch
- mediator stopped
- 151008 07:02:39 Starting schedule: /home/keck/sch/mce_autotune.sch
- az limit reached, pmac stopped, reset pmac
- /home/keck/sch/runend.sch
- weather: blowing snow, haze
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 1,2,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_120.sch
- /home/keck/sch/runend.sch
- weather: clearing, wind picking up again, overcast, blowing snow
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_119.sch
- az-diff just over 30k
- 151005 23:14:23 resume_schedule
- /home/keck/sch/runend.sch
- weather: hazy, wind dying, clearing, getting sunny
- windows and baffles: windows, clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_118.sch
- MAPO furnace quit again, building was below freezing downstairs, freezing upstairs
- compressor room and telescope stay quite warm
- /home/keck/sch/runend.sch
- weather: blowing snow, wind dying, haze
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_117.sch
- MAPO furnace quit, was off for several hours
- /home/keck/sch/runend.sch
- weather: blowing snow, clearing overhead, overcast
- windows and baffles: windows clear, barely any snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- spudws1 froze, restarted gcp and masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_116.sch
- az-diff went barely over 30k, reset pmac
- 150929 19:49:22 resume_schedule
- /home/keck/sch/runend.sch
- weather: blowing snow, overcast, clearing
- windows and baffles: windows clear, litte snow in the baffles, D had quite a bit of snow in and on the baffle
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_115.sch
- az-diff just went over 30k since it was the last scan set, nothing gonna be lost
- with resetting the pmac
- 150928 01:00:41 resume_schedule
- /home/keck/sch/runend.sch
- weather: overcast, haze, wind picking up again, hazy
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_114.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, wind dying down, overcast
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- run without rx0, mce0 is powered off
- /data/keckdaq/autoqueue/pending/9_kCMB_49_113.sch
- mediator crashed, had to restart the run
- rx0 is back online
- 150923 04:06:54 Starting schedule: /home/keck/sch/mce_autotune.sch
- 150923 04:11:44 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_49_113.sch
- az-diff jump
- 150923 20:16:58 resume_schedule
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow
- windows and baffles: windows clear, quite some snow in and on the baffles
-
- cycleFridge enable=2, on rx 1, 2, 3, 4
- rx0 is cooling down but won't be included in the next run
- recharged comp 1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_112.sch
- 150921 around 15:00 comp 3(rx0) breaker tripped, warmed up quite a bit
- /home/keck/sch/runend0.sch
- weather: blowing snow, hazy
- windows and baffles: windows clear, quite some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_111.sch
- az-diff, went just over 30k (on (1-4), we should increase the cut to 35K
- reset pamc
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow
- windows and baffles: windows clear, quite a bit of snow in and on baffles
-
- spudws1 froze up during last run, restarted gcp, masd
- cycleFridge enable=2, on all rx
- worked on readhead and track, see if that improves the drifting of the az-diff values
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_110.sch
- az-diff value just over 30k, reset pmac
- 150917 18:58:39 resume_schedule
- /home/keck/sch/runend.sch
- weather: haze, blowing snow, wind dying down
- windows and baffles: a few snow grains in the center of windows spread out over a 3in circle, very little snow on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_109.sch
- signal hound not working for now, needs internet update
- signal hound is running again 150915 22:00
- some sporadic az-diff over 30k towards end of run, BUT data are good
- /home/keck/sch/runend.sch
- weather: blowing snow, haze
- windows and baffles: windows clear, quite some snow in and on baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_108.sch
- /home/keck/sch/runend.sch
- weather: clear cold, wind picking up, blowing snow, haze
- windows and baffles: windows clear, some snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_107.sch
- /home/keck/sch/runend.sch
- swapped comp 4(rx3) with the spare
- strong low frequency vibrations from comp 4 (might see it in data)
- weather: clear and cold
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp2
- comp4 makes a louder noise !?
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_106.sch
- az-diff jump
- 150909 07:25:36 resume_schedule
- az-diff jump
- 150909 09:26:41 resume_schedule
- az-diff jump
- 150909 18:08:53 resume_schedule
- /home/keck/sch/runend.sch
- weather: mostly clear, wind picking up, blowing snow, some haze
- windows and baffles: windows clear, quite some snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_105.sch
- az-diff (1+3)-(2+4) went just over 30k, don't cut the data they are fine
- /home/keck/sch/runend.sch
- weather: clear, some haze
- windows and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_104.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_103.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, some haze
- windows and baffles: windows clear, some snow on the baffles
-
- cycleFridge enable=2, on all rx
- removed .035 in from A3 readhead spacer plate, sunk screws for readhead by .05in
- this readhead roller shifted quite far down, because of wear on track an telescope rollers
- which made above actions necessary
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_102.sch
- az-diff jump and problems
- 150901 06:25:22 resume_schedule
- ponted signalhound towards station, starting at 300MHz
- LMR OFF TEST: All amps off at 0800 UTC
- Plan to turn Station radios back on at 15:50 UTC
- Radiotech describes the power up: Turned on first channel, waited until it got the control signal. Turned on other channels. Did a radio call/check on each channel.
- 21:00 UTC moved signalhound back towards sat dishes, starting at 1GHz
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- changed readhaed A3, changed back to original one
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_101.sch
- /home/keck/sch/runend.sch
- weather: very hazy, clearing clear
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_100.sch
- masd1 unresponsive for a while, keck34 needed cold reboot
- /home/keck/sch/runend.sch
- weather: very hazy, overcast, quite hazy
- windows and baffles: windows clear, lots of snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_099.sch
- az-diff jump & problems with 3A readhead
- 150826 05:07:29 resume_schedule
- got another massive He leak on compressor 3, rx=0
- swapped the A High to the spare, again that line only lasted less than 2 months !!!!
- /home/keck/sch/runend.sch
- weather: mostly clear, little haze, clear, cold, haze
- windows and baffles: clear, only D had a little bit of snow on the baffle
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_098.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, little haze
- windows and baffles: windows clear, some snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_097.sch
- az-diff jump, only to 80k, data would be good
- 150821 22:00:23 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear, bit hazy
- windows and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_096.sch
- radio antenna test with BICEP3 (copied from BICEP3 log, thanks Sam)
- Channel #4 is current control channel. 451.450 MHz signal visible on spectrum analyzer
- 150819 12:39:42 channel #4 off.
- Channel #5 has picked up the control signal @ 451.900 MHz
- 150819 12:41:05 SR: SA pic#2
- 150819 12:44:26 SR: SA pic#2 redo
- 150819 12:44:41 channel #5 off.
- Channel #1 has picked up the control signal @ 450.050 MHz
- 150819 12:46:21 SR: SA pic#3
- 150819 12:50:17 channel #1 off.
- Channel #2 has picked up the control signal @ 450.525 MHz
- 150819 12:53:12 SR: SA pic#4
- 150819 12:55:06 channel #2 off.
- Channel #3 has picked up the control signal @ 450.950 MHz
- 150819 12:56:35 SR: SA pic#5
- 150819 12:59:45 channel #3 off.
- All channels off. AZ-fixed signal is gone!!
- 150819 13:00:51 SR: SA pic#6
- 150819 13:08:59 SR: SA pic#7.
- Starting experiments with Talk around channels. Using channel #1 @ 452.025 MHz
- 150819 13:08:17 talk around channel 1 DSL test start
- Almost no signal at all except of one very large spike. This may have been at very same moment as when someone opened the double door on the second floor.
- 150819 13:14:08 talk around channel 1 DSL test end
- 150819 13:17:38 talk around channel 1 DSL test above ground shield start
- Booming signal many orders of magnitude larger and station antenna signal
- 150819 13:21:51 talk around channel 1 DSL test above ground shield end
- Squids might be saturated or otherwise messed up after that last test.
- 150819 13:22:44 talk around channel 1 DSL test outside ground shield start
- Still huge signal. Slightly attenuated by GS but not much.
- 150819 13:24:43 talk around channel 1 DSL test outside ground shield end
- /home/keck/sch/runend.sch
- weather: clear, haze on horizon
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- spudws1 froze
- restarted gcp and masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_095.sch
- /home/keck/sch/runend.sch
- weather: clear, little hazy
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_094.sch
- 150815 11:59:26 masd3 had stopped, restarted keck36
- 150815 13:30:30 restarted masd3
- /home/keck/sch/runend.sch
- weather: mostly clear, hazy, clearing, some blowing snow
- windows and baffles: windows clear, some snow in the baffles, D a bit more
-
- cycleFridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_093.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: windows clear, little snow on the baffles
-
- cycleFridge enable=2, on all rx
- 150813 06:49:04 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 150813 10:02:45 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- keck 36 unresponsive
- 150811 10:28:36 schedule /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_092.sch
- /home/keck/sch/runend.sch
- weather: haze, blowing snow, clearing, clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- rx4 showed higher rms number, run through Sarah's check and instructions
- disconnected power HK backpack, disconnected outside connector, power back on
- disconnected middle connector, power back on, connected both connectors, power back on
- value is good again (2.283)
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_091.sch
- pmac stopped
- /home/keck/sch/runend.sch
- weather: haze, some clouds, blowing snow
- windows and baffles: windows clear, some snow in and on the baffles
-
- cycleFridge enable=2, on all rx
- 150809 07:34:25 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 150809 07:39:37 abort_schedule, weather is not good enough
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_090.sch
- /home/keck/sch/runend.sch
- weather: clear, clouds moving in at the end
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_089.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_088.sch
- pmac stopped
- /home/keck/sch/runend.sch
- weather: still a bit hazy, clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_087.sch
- az-diff jump
- 150802 21:49:21 resume_schedule
- 150803 01:52 pmac stopped
- /home/keck/sch/runend.sch
- weather: overcast, clearing, wind dying down
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- replaced 3A readhead roller
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_086.sch
- az-diff jump
- 150731 06:26:13 resume_schedule
- /home/keck/sch/runend.sch
- weather: haze, overcast
- windows and baffles: windows clear, quite some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_085.sch
- az-diff jump
- 150728 21:36:31 resume_schedule
- az-diff jump
- 150729 23:35:38 resume_schedule
- /home/keck/sch/runend.sch
- weather: hazy, blowing sow
- windows and baffles: windows clear, quite some snow in and on baffles
-
- cycleFridge enable=2, on all rx
- replaced 3B readhead roller
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_084.sch
- pmac stopped
- az-diff jump
- 150727 22:26:59 resume_schedule
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, high winds
- windows and baffles: windows clear, but tons of snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_083.sch
- az-diff jump
- 150725 23:29:25 resume_schedule
- 150726 04:00 pmac stopped
- /home/keck/sch/runend.sch
- weather: clear, cold, getting hazy, blowing snow, haze
- windows and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_082.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_081.sch
- /home/keck/sch/runend.sch
- weather: blowing snow, high winds, overcasted, clearing, clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- antenna on keck31 stopped, lost connection from spudws1
- restarted keck31, 32, gcp, masd
- luckily was at end of fridge cycle, so all could be recovered
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_080.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, blowing snow, overcast
- windows and baffles: windows clear, some snow in and on the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_079.sch
- rx0 started to warm up sloly around 150717 19:00, was to expected after just making it
- to the cycle and only got a double cycle
- /home/keck/sch/runend0.sch
- weather: hazy, clearing
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_078.sch
- 150715 23:00 rx0 has warmed up to 20K on FPU, reason was massive He leak on A1 High az wrap line
- rx0 is cooling back down and hopefully will be ready to cycle with the other rx in a few hours
- /home/keck/sch/runend0.sch
- weather: overcast, very hazy, blowing snow, clearing
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_077.sch
- az diff problems, replaced roller on 1B
- 150713 11:05:43 resume_schedule
- /home/keck/sch/runend.sch
- weather: haze, blowing snow, very hazy
- windows and baffles: windows clear, some snow in the baffles, D quite a bit
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_076.sch
- keck 36, masd3 stopped
- /home/keck/sch/runend.sch
- weather: bit hazy, haze, blowing snow
- windows and baffles: windows clear, quite some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_075.sch
- /home/keck/sch/runend.sch
- weather: clear, very cold, getting hazy, wind picking up
- windows and baffles: windows clear, little snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_074.sch
- /home/keck/sch/runend.sch
- weather: cold, clear overhead, clear
- windows and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
- restarted omega0
- keck 32: NTP server wasn't running, started service
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_073.sch
- mediator froze
- 150705 07:50:59 abort_schedule
- 150705 07:53:12 schedule /home/keck/sch/mce_autotune.sch
- 150705 07:54:52 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_49_073.sch
- az-diff jump
- 150705 08:37:37 resume_schedule
- mediator froze
- 150705 19:46:45 Starting schedule: /home/keck/sch/mce_autotune.sch
- 150705 19:52:48 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_49_073.sch
- /home/keck/sch/runend.sch
- restarted all keck computers
- weather: clear, very cold
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_072.sch
- /home/keck/sch/runend.sch
- weather: clear, very cold
- windows and baffles: clear (only D baffle tiny bit of snow on it)
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_071.sch
- /home/keck/sch/runend.sch
- weather: cold and clear
- windows and baffles: clear (only D baffle tiny bit of snow on it)
-
- cycleFridge enable=2, on all rx
- recharged comp 3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_070.sch
- pmac stopped
- big az diff jump
- 150629 09:27:01 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
- working on rx4 noise, reseating middle connector
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_069.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_068.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_067.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_066.sch
- /home/keck/sch/runend.sch
- weather: clear, getting colder
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- 150620 10:32:34 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_065.sch
- /home/keck/sch/runend.sch
- weather: hazy, blwoing snow quite hazy, clearing
- windows and baffles: windows clear, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_064.sch
- az-diff jump, 150617 06:20:40 resume_schedule
- /home/keck/sch/runend.sch
- weather: hazy with clear periods
- windows and baffles: windows clear, some snow in baffles
-
- cycleFridge enable=2, on all rx
- spudws froze, restarted gcp, masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_063.sch
- masd2 wasn't updating, restarted keck35 and masd2
- az-diff jump way below 100k
- 150616 06:03:12 resume_schedule
- az-diff jump way below 100k
- 150616 06:55:21 resume_schedule
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, wind dying, clearing, getting hazy
- windows and baffles: windows clear, some snow in baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 3,4
-
150612 13:52:15 - 150614 08:20:42
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_062.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, bit hazy
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- restarted gcp, masd, weather is working again
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_061.sch
- weather station is not updating, seems to be a computer issue
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, blowing snow, clear, haze moving in
- windows and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_060.sch
- /home/keck/sch/runend.sch
- weather: hazy, better overhead, clear overhead, blowing snow
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_059.sch
- /home/keck/sch/runend.sch
- weather: clear, hazy, wind picking up, blowing snow
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- baffle heater D (rx3) is dead, baffle is only passively heated by adjunct baffles and warm air coming from building
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_058.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_057.sch
- another He leak in az wrap A Hi, the one already suspect
- 150602 23:50 swapped A Hi for spare
- about 150604 02:00 time was corrected for the computers
- /home/keck/sch/runend.sch
- weather: clear, cold, getting hazy
- windows and baffles: windows clear, some snow in the baffles, one can see the difference of colder baffles
-
- cycleFridge enable=2, on all rx
- pulled 3 new az lines into the wrap
- A Lo (comp 3) was changed for new spare line
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_056.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 2, 3, 5
- leak in 5 is worse than in 3
- swapped E Hi line for spare (comp 5)
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_055.sch
- mediator crashed, had to restart gcp
- 150530 18:11:19 Starting schedule: /home/keck/sch/mce_autotune.sch
- 150530 18:13:47 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_49_055.sch
- 150531 09:14:23 abort_schedule
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 3, 5, possible new leak in 5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_054.sch
- pmac stopped, 150527 18:01:35 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear, cold, some clouds, litte haze
- windows and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 3
- problem with rx3 baffle heater, can only apply very little power before breaker
- in extension cord will shut down, same with other cord
- as for now 4 baffles running of one variac, rx3 of the second one
- will try more with warmer outside tempratures
- reseated all connectors on rx4 HK backpack
-
- /home/keck/sch/mce_autotune.sch
- rx4 showed higher magic number, even after reseating connectors
- /data/keckdaq/autoqueue/pending/9_kCMB_49_053.sch
- masd4 stopped, after reboot of keck37 and restart of masd4 it came back
- problems with rx3 baffle heater
- az diff jump, 150527 02:56:23 resume_schedule
- monitor stopped, control window was gone, had to restart gcp, masd
- 150527 04:46:13 Starting schedule: /home/keck/sch/mce_autotune.sch
- 150527 04:49:10 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_49_053.sch
- 150527 09:32:54 abort_schedule
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: windows clear, some snow in baffles, more in the colder ones
-
- cycleFridge enable=2, on all rx
- recharged comp 3,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_052.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: windows clear, very little snow in the baffles, problems with 2 baffle heaters
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_051.sch
- /home/keck/sch/runend.sch
- weather: hazy, clearing clear
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 3
- comp 3 started to lose pressure, leak is still quite weak, so I keep an eye on it
- I would guess it will be the A high line, which would be the only one giving off black stuff
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_050.sch
- reseated power connector and middle connector of HK on rx4
- /home/keck/sch/runend.sch
- weather: hazy
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_049.sch
- /home/keck/sch/runend.sch
- weather: clear, getting hazy, very hazy
- windows and baffles: very, very little snow in the center of the windows, some snow on the baffles
-
- cycleFridge enable=2, on all rx
- mediator crashed during cycle, had to restart fridgecycle
- 150517 12:21:59 Starting schedule: /home/keck/sch/fridgecycle.sch
- problems with fridgecycle, not responsive
- rebooted keck 32, gcp, masd
- 150517 13:15:46 Starting schedule: /home/keck/sch/fridgecycle.sch
- recharged comp 3
-
- keck34 froze, restarted masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_048.sch
- /home/keck/sch/runend.sch
- weather: overcast, clearing, clear
- windows and baffles: windows clear, very little snow in the baffle
- signalhound PC was down
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_047.sch
- /home/keck/sch/runend.sch
- weather: hazy, overcast
- windows and baffles: windows clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_046.sch
- /home/keck/sch/runend.sch
- weather: mostly overcasted, blowing snow, clear skies but towards the end of run haze
- windows and baffles: windows clear, some snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_045.sch
- rebooted keck33 to 37
- restarted gcp, masd
- /home/keck/sch/runend.sch
- weather: mostly clear, bit hazy, wind picking up, mostly overcasted
- windows and baffles: windows clear, quite a bit of snow in and on baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 2,3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_010.sch‎
- masd3 stopped
- 150507 17:56:42 abort_schedule
- 150507 18:08:15 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_010.sch‎
- 150508 00:12:48 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_49_044.sch
- /home/keck/sch/runend.sch
- weather: clear, very little haze, mostly clear, bit hazy
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_043.sch
- 150506 14:47:12 suspend_schedule, az-diff jump
- 150506 14:59:47 resume_schedule
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_042.sch
- problems with keck37
- /home/keck/sch/runend.sch
- weather: some haze, mostly clear overhead
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_49_041.sch
- /home/keck/sch/runend.sch
- weather: hazy, overhead still ok, overcaseted, clearing overhead
- windows and baffles: windows clear, some snow in baffles
-
- cycleFridge enable=2, on all rx
-
- missed first 3 scansets due to excessive star pointing
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_040.sch
- /home/keck/sch/runend.sch
- weather: clear, cold, getting hazy, overhead still quite ok
- windows and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
- 150429 14:35:39 Starting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- 150429 19:20:52 Exiting schedule: /home/keck/sch/starpoint_pole_keck_winter.sch
- starpointing gets a bit out of hand with that many stars and 5h !!!!
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_039.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_038.sch
- /home/keck/sch/runend.sch
- weather: bit hazy, blowing snow, clearing, clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- el drive problem, found 2 connected wires but not insulated !!!!!!!!!
- sparked with mount and caused el drive to stop and trip other axis as well
- /data/keckdaq/autoqueue/pending/9_kCMB_48_037.sch
- /home/keck/sch/runend.sch
- weather: blowing snow, haze, sky clearin, mostly clear, but wind picking up again
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_036.sch
- /home/keck/sch/runend.sch
- weather: overcasted, blowing snow, high winds, warm, clearing overhead, wind easing
- windows and baffles: windows clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_035.sch
- pmac stopped
- 150420 18:30 massive He leak on rx2, swapped to spare line, FPU warmed up to 330mK
- recovering now
- 150421 05:45 turned wifi off on thinkpad laptop controlling the 24″ chopper
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, overcasted, high winds, warm
- windows and baffles: windows clear, some snow on the baffles
-
- cycleFridge enable=2, on all rx
- spudws1 froze, restarted gcp and masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_034.sch
- /home/keck/sch/runend.sch
- weather: clear, gettin hazy, wind picking up, blowing snow
- windows and baffles: windows clear, some snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_033.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, clearing, clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_032.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow
- windows and baffles: windows clear, some snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_031.sch
- /home/keck/sch/runend.sch
- weather: clear, thin clouds, blowing snow, hazy
- windows and baffles: windows clear, lots of snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 2,3,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_030.sch
- /home/keck/sch/runend.sch
- weather: clear, cold, nearly -100F
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_029.sch
- az-diff jump
- 150409 06:55:29 resume_schedule
- /home/keck/sch/runend.sch
- weather:clear, cold
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_028.sch
- /home/keck/sch/runend.sch
- weather: clearing, clear, haze
- windows and baffles: clear
-
- 150405 13:10:09 Starting schedule: /home/keck/sch/mce_autotune.sch
- rx4 backpack power off
- 150405 13:19:49 Starting schedule: /home/keck/sch/mce_autotune.sch
- disengaged connector #2, backpack on
- 150405 13:24:43 Starting schedule: /home/keck/sch/mce_autotune.sch
- reengaged connector #2, backpack on
- 150405 13:37:14 Starting schedule: /home/keck/sch/mce_autotune.sch
- disengaged connector #1, backpack on
- 150405 13:41:11 Starting schedule: /home/keck/sch/mce_autotune.sch
- reengaged connector #1, backpack on
- 150405 13:44:49 Starting schedule: /home/keck/sch/mce_autotune.sch
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_027.sch
- 150405 around 04:00 rx3 mce no sample Bolos
- rx3 warming up, very low pressure in compressor, checking for leaks
- rx3 sample bolos started to read again, FPU warmed up only to about 320mK
- massive leak in high pressure az wrap line on rx3, about 45psi/h loss, swapped to spare
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, wind easing
- windows and baffles:
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_026.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, hazy overhead
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_025.sch
- 150331 13:34:46 suspend_schedule, az diff jump
- 150331 13:51:24 resume_schedule
- 150331 18:13:53 suspend_schedule, pamc stopped
- 150331 18:14:41 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- changed A3 readhead roller
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_024.sch
- 150329 05:57:13 suspend_schedule
- big az-diff jump, disregard data from jump until resume
- 150329 06:09:21 resume_schedule
- 150329 20:39:28 suspend_schedule
- big az-diff jump, disregard data from jump until resume
- 150329 20:50:29 resume_schedule
- 150330 03:10:04 suspend_schedule
- big az-diff jump, disregard data from jump until resume
- 150330 05:13:33 resume_schedule
- mce4 had a connector problem
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- 150328 17:37:15 schedule /home/keck/sch/starpoint_pole_keck_summer.sch
- pamc stopped during pointing, suddenly big offset as well, restarted the 3rd dk angle again
- 150328 17:42:52 schedule /home/keck/sch/starpoint_pole_keck_summer_temp.sch
- masd4 showed problems, restarted keck37 and masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_023.sch
- /home/keck/sch/runend.sch
- weather: claering, clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- fixed az drive
- recharged comp 1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_022.sch
- 150325 05:12:08 suspend_schedule
- tiny az-diff jump, just over 30k, data would have been good
- 150325 05:17:50 resume_schedule
- az fol error just between scansets, no impact on run
- az fol error 150326 around 01:10
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, wind dying, sky clearing a bit
- windows and baffles: windows clear, lots of snow in the baffles
-
- cycleFridge enable=2, on all rx
- both furnaces are down for about 36h now, with electric heat we keep MAPO running
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_021.sch
- az fol error tripped again
- /home/keck/sch/runend.sch
- lost both heaters in MAPO, got a bit chilly in the main buidling, telescope stayed pretty constant and warm
- weather: clear, getting overcasted, wind picking up, warming up, overcast, high winds, blowing snow
- windows and baffles: windows clear, lots of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_020.sch
- network problem occured with spudws1 and compressor room
- 150320 21:19:52 Starting schedule: /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_020.sch
- 150322 04:04:03 suspend_schedule, pmac stopped
- 150322 04:29:19 resume_schedule
- 150322 08:03:01 abort_schedule
- sky is unexpected very clear, will run knoise schedule
- 150322 08:03:01 Starting schedule: /home/keck/sch/mce_autotune.sch
- 150322 08:04:50 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_009.sch
- /home/keck/sch/runend.sch
- weather: clearing, clear, cold
- windows and baffles: windows clear, very little snow in the baffles
-
- spudws1 froze, restarted gcp and masd
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_019.sch
- az drive tripped pmac, with handcontroller there were no issues
- replaced ccw soft limit switch, since the trip occures now with every #1j+ command
- and telescope running into this limit, but no difference, so I assume a encoder issue !?
- 150319 09:38:43 resume_schedule
- another az trip
- /home/keck/sch/runend.sch
- weather: thin clouds, mist, blowing snow
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- el drive causing pmac to stop
- #5 amp (2nd el motor) caused the problem, replaced with spare
- drive works again
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_018.sch
- rx4 started to warm up again a few hours into the run?
- rx4 backpack has some connector problems, that causes the heating
- still working on it
- had to cycle a 2nd time on rx4 because high UC would make a cooldown to target possible
- az-diff jump to 75k
- 150318 05:53:02 resume_schedule
- pmac stopped
- 150318 12:02:22 resume_schedule
- pmac stopped again, problems with el drive
- 150318 13:12:31 abort_schedule
- /home/keck/sch/runend.sch
- weather: overcasted, blowing snow
CMB 2015
-
- cycleFridge enable=1, on all rx
-
- removed BAM and got telescope ready for CMB observations
- cycleFridge enable=3, on all rx
- recharged comp 2,3,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32i_006.sch
- 150315 14:35:06 Starting schedule: /home/keck/sch/mce_autotune.sch
- started another fff schedule without fridgecycle, since we had enough time for that
- might have to throw out the last hours
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32g_006.sch
- weather: clear, mist on horizon, cold
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_006.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear, mist on horizon
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_006.sch
- /home/keck/sch/mce_autotune.sch
- weather: clearing, mist at horizon
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_006.sch
- /home/keck/sch/mce_autotune.sch
- weather: overcasted, blowing snow
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_006.sch
- /home/keck/sch/mce_autotune.sch
- weather: thin clouds. mist on horizon, blowing snow
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_006.sch
- /home/keck/sch/mce_autotune.sch
- weather: thin high clouds, mist on horizon
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_006.sch
- /home/keck/sch/runend.sch
- weather: thin high clouds, mist on horizon
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_005.sch
- /home/keck/sch/mce_autotune.sch
- weather: mostly clear, misty at the horizon, blowing snow
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32i_005.sch
- /home/keck/sch/mce_autotune.sch
- weather: mostly clear, misty at the horizon, blowing snow
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32h_005.sch
- /home/keck/sch/mce_autotune.sch
- weather: mist, blowing snow
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32g_005.sch
- /home/keck/sch/mce_autotune.sch
- /home/keck/sch/runend.sch
- weather: mist, blowing snow
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_005.sch
- /home/keck/sch/mce_autotune.sch
- weather: high clouds, mist on horizon
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_005.sch
- /home/keck/sch/mce_autotune.sch
- weather: high clouds
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_005.sch
- /home/keck/sch/mce_autotune.sch
- weather: clearing, mist
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_005.sch
- /home/keck/sch/mce_autotune.sch
- weather: overcasted
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_005.sch
- /home/keck/sch/mce_autotune.sch
- weather: overcasted, blowing snow
-
- cycleFridge enable=2, on all rx
-
- moved mirror to alternate postition: A,B 14.15/16in E,F 55.5in G,H 28.14/16in
- alternate postition schedules start with *005.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_005.sch
- /home/keck/sch/mce_autotune.sch
- weather: mostly overcasted, blowing snow
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32h_004.sch
- /home/keck/sch/mce_autotune.sch
- weather: mostly overcasted
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32g_004.sch
- /home/keck/sch/mce_autotune.sch
- weather: clearing, thin clouds
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_004.sch
- /home/keck/sch/mce_autotune.sch
- weather: overcasted
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_002.sch
- /home/keck/sch/mce_autotune.sch
- weather: overcasted
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_002.sch
- weather: getting overcasted, warming up
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_004.sch
- weather: clear, mist on horizon
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_004.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear, mist on horizon
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_002.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_002.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear, thin clouds
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear, mist on horizon
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: mostly clear, some mist
-
- cycleFridge enable=2, on all rx
- mast was fitted with reflecting sheets over a length of about 5m
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: mostly clear, some mist
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32i_003.sch
- /home/keck/sch/mce_autotune.sch
- weather:
-
- cycleFridge enable=2, on all rx
- recharged comp 2,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32h_003.sch
- /home/keck/sch/mce_autotune.sch
- weather: mostly clear
-
- cycleFridge enable=2, on all rx
- el drive is working again
-
- cycleFridge enable=2, on all rx
-
- rx2 just started to warm up, at least the hold time at el=55 is good
- el drive trouble shooting continues
- cycleFridge enable=2, on all rx
-
- cycleFridge enable=2, on all rx
- drive system failure, el axis won't move
- under investigation
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_003.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_003.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear, little mist
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_003.sch
- /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32i_001.sch
- weather: mostly clear, some high clouds
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32h_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: mostly clear, some high clouds
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 150213 01:48:53 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_001.sch
- 150213 09:30:00 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32g_001.sch
- we really only can do one schedule after a cycle
- weather: slight overcast
-
- cycleFridge enable=2, on all rx
Winter 2015
-
- /home/keck/sch/mce_autotune.sch
- 150212 06:22:40 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32f_001.sch
- 150212 10:48:25 abort_schedule, keck 33 unresponsive
- 150212 10:57:30 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_001.sch
- /home/keck/sch/mce_autotune.sch
- rebooted keck33 - keck37
- weather: mostly clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear
-
- cycleFridge enable=2, on all rx
-
- 150211 01:16:50 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_001.sc
- 150211 08:58:52 Exiting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_001.sch
-
- 150210 19:58:14 cycleFridge enable=2, rx=all-rx5-rx6-rx7
- 150210 19:58:21 cycleFridge
-
- 150210 02:53:14 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_002.sch
- 150210 10:34:45 Exiting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_002.sch
-
- 150209 18:22:59 cycleFridge enable=3, rx=all-rx5-rx6-rx7
- 150209 18:24:36 cycleFridge
-
- 150209 17:43:01 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32d_001.sch
- aborted, frdige ran out
-
- 150209 09:56:33 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_001.sch
- rx1 far field mapping
- Front top = 57.5 (E&F) Front bottom = 23.5 (A&B) Back = 25.2 (G&H)
- UC on rx1 runs out at approximately 14:00 due to poor cycle
- 150209 17:36:58 Exiting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_32b_001.sch
-
- cycleFridge enable=2, on all rx
- recharged comp 3
-
- Started ~sch/keckycal_001.sch on Rx2 on Ti
- Blue Skies
- 150206 22:11:20 Finished Rx2
- 150206 22:51:03 restarted on Rx4 on Ti and 10 deg off from normal in dk
- 150206 23:34:35 Finished Rx4
-
- Started ~/sch/keckycal_001.sch on Rx3 on Ti
- Blue Skies
- 150206 04:24:28 Finished Rx3
- 150206 09:01:55 restarted keckycal on Rx0 on Ti
- 150206 09:45:36 Finished Rx0
- 150206 10:31:51 restarted on Rx1 on Ti
- 150206 11:19:00 Finished Rx1
- light to moderate blowing snow
-
- /home/keck/sch/mce_autotune.sch
- 150202 22:50:54 /data/keckdaq/autoqueue/pending/9_kCMB_48_019.sch dk=068
- 150203 06:26:57 Aborted schedule after noticing large enc_az_diff errors
- Jamie and Justin tried cleaning procedure
- Problem rewinding in az; find one "A" read head is red
- Waiting for more help/expertise in morning
- E-stop pushed to prevent further movement until later
-
- Started ~/sch/keckycal_001.sch for Rx3 on Al
- Blue Skies
- 150202 22:09:00 Finished Rx3
-
- Started ~/sch/keckycal_001.sch for RX3
- Hazy weather
- Delays/stalls in keck32... schedule aborted until solution found
-
- Started ~/sch/keckycal_001.sch for RX 1, only on Al
- Blue Skies
- 150201 03:05:13 restarted schedule for Rx2, only
- Some light haze
- 150201 04:08:58 finished Rx2
- 150201 07:12:22 restarted schedule for Rx3, only
- 150201 07:35:37 aborted schedule. Rx3 fridge is out.
- 150201 07:58:00 Rx0 compressor pressure down. 4K temps rising.
- 150201 08:32:11 restarted schedule for Rx4, only on Al
- Blue Skies
- 150201 09:19:11 finished Rx4
- 150201 10:02:00 Compressor on Rx0 low: 53/206 psi. Charged to 85.5/296
-
- /home/keck/sch/mce_autotune.sch
- 150131 08:45:32 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_48_018.sch
- 150131 18:26:39 Compressor on rx0 low pressure: 67/242psi, 4K temps rising
- Recharged to 87/295psi
- Other compressors ok
- 150201 00:37:11 aborted schedule after a scanset to run Keckycal
-
- ~/sch/keckycal_001.sch on Al
- somewhat clear. Changes often. Light blowing snow.
- abort after Rx0
-
- 150130 18:53:09 cycleFridge enable=2, rx=all-rx5-rx6-rx7
- 150130 18:53:21 cycleFridge
-
- 150129 04:33:54 schedule /home/keck/sch/mce_autotune.sch
- 150129 04:38:22 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_48_017.sch
- 150129 08:48:10 abort_schedule (chose new biases)
- 150129 08:50:01 schedule /home/keck/sch/mce_autotune.sch
- 150129 08:51:56 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_48_017.sch
-
- Start ~/sch/keckycal_RX4_001.sch with Al bias
- Clear Skies. No Blowing Snow.
-
- 150128 15:55:17 Starting schedule: /data/keckdaq/autoqueue/pending/1_lc_basetemp_1_002.sch
-
- 150128 16:29:15 Starting schedule: /data/keckdaq/autoqueue/future/1_lc_basetemp_1_003.sch
-
- 150128 09:07:41 Starting schedule: /data/keckdaq/autoqueue/pending/9_fridgecycle_002.sch
- aborted
-
- 150128 02:57:10 Starting 1_lc_basetemp_1_001.sch
-
- schedule steps in bias and waits 45min between load curves
- Very clear skysat first, becoming overcast
- Schedule didn't heat FPU after first step becuase pid wasn't turned off. Will retry after fridge cycle
-
- 150127 22:23:56 Starting schedule: /data/keckdaq/autoqueue/pending/1_skydip_lc_01_001.sch
- schedule now has longer wait time between load curves
- Very clear skies
-
- 1_knoise_responsivity_9_008.sch
- Clear skys
- Bias from 7000 to 200 in steps of 100
- 150127 05:30:29 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_008.sch
- 150127 10:39:19 Exiting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_008.sch
-
- keckycal_RX4_001.sch
- On aluminum bias
-
- 1_partial_lc_basetemp_1_001.sch
- forebaffle is on rx1, no forebaffle on others
- 150127 01:56:58 Starting partial_lc_basetemp.sch
- Keckycal is on rx4
- Weather is good
- 150127 02:51:37 partial_lc_basetemp.sch- done
-
- 1_knoise_responsivity_9_007.sch
- 150126 05:20:43 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_007.sch
- Bias from 12000 to 2000 in steps of 200.
- weather is good
- BICEP3 also took responsivity data this evening
- 150126 09:13:19 Exiting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_007.sch
-
- 150126 04:45:15 Starting zoteofoam_on_off.sch
- This time detectors have thermalized, and elnods are visible. Use this data.
- 150126 05:01:07 Exiting schedule: /home/keck/sch/zotefoam_on_off.sch
-
- 150126 04:13:08 Starting schedule: /home/keck/sch/zotefoam_on_off.sch
- Look at Rx1 Column 5, Rx0 Column7
- Blanking plates on rx3, rx4
- Ran to completion, but detectors not thermalized from config_hw
- 150126 04:38:01 Exiting schedule: /home/keck/sch/zotefoam_on_off.sch
-
- 150126 03:17:18 Starting schedule: /home/keck/sch/zotefoam_on_off.sch
-
- 150126 02:48:34 Starting schedule: /home/keck/sch/zotefoam_on_off.sch
- Zotefoam on off on RX1 (K2) (220GHz).
- 150126 03:14:32 abort_schedule
- Schedule never ran an elnod. Try again with track forebaffle inserted
-
- 150125 21:36:39 Starting schedule: /home/keck/sch/skydip_lc.sch
- Step in elevation from 45 to 85 degrees, then back down to 45 degress at 5 degree intervals, with full load curve at each
- 150125 23:44:20 Exiting schedule: /home/keck/sch/skydip_lc.sch
-
- Forebaffle On Off Test on K2 (1_forebaffle_on_off_4_009.sch)
-
- Start Keckycal schedule for Rx0 test. Use dielectric sheet from 2013.
- Blowing snow. Thin layer of clouds
keckdaq Run 7 (Rx0, Rx1, Rx2, Rx3, Rx4; Dec 02 2013 - Dec 14 2014)
LINKS:
keckdaq Run 9 |
keckdaq Run 8 |
keckdaq Run 6 |
keckdaq Run 5 |
keckdaq Run 4 |
keckdaq Run 3 |
keckdaq Run 2 |
keckdaq Run 1 |
keckdaq Run 0 |
mapodaq (summer lab tests)
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_017.sch
- Running tests on new rx1 membrane. All other rx have cover plates on, forebaffles off.
- 141216 21:30:32 suspend_schedule due to rx4 heating
- 141216 22:21:48 abort_schedule
- 141216 22:36:05 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_48_006_rx1.sch
- 141217 01:04:08 abort_schedule
- /home/keck/sch/runend.sch
- weather: cloudy
- windows and baffles: rx1 clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_azdkrot_01_002.sch
- Running tests on new rx1 membrane. All other rx have cover plates on, forebaffles off.
- observed cyclic heating of rx4, possibly correlated with schedule dk shifts?
- /home/keck/sch/runend.sch
- weather: cloudy
- windows and baffles: rx1 clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /home/keck/7_azdkrot_01_001.sch
- Running tests on new rx1 membrane. All other rx have cover plates on, forebaffles off.
- 141212 22:15:05 abort_schedule
- 141212 23:14:01 restarted schedule with updated dk rotation procedure.
- 141212 23:19:15 suspend_schedule
- 141212 23:19:43 resume_schedule
- weather: clear, calm
- windows and baffles: rx1 clear
-
- cycleFridge enable=2, on all rx
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 20141207 03:18 pmac tripped, reset
- ending the run slightly early because of planned power outage
- /home/keck/sch/runend.sch
- 141210 02:55:14 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
- weather: clear, cloudy, clear again
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_015.sch
- 20141205 22:00 suspended schedule to rehome telescope after turbo pump test
- 20141205 22:06 resumed schedule
- 20141206 12:00 az diff jump overnight
- /home/keck/sch/runend.sch
- weather: partly cloudly, then clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_014.sch
- /home/keck/sch/runend.sch
- weather: windy, poor visibility
- windows and baffles: snow on baffles and membranes, liquid water on WTF plates
-
- cycleFridge enable=2, on all rx
- recharged comps 1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_013.sch
- 141201 21:00 suspended schedule to run the "BBC schedule"
- 141202 4:00 resumed normal schedule
- /home/keck/sch/runend.sch
- weather: windy, overcast, light snow
- windows and baffles: light snow, liquid water on WTF plates
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_012.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_011.sch
- 141127 19:00 small az diff, rehome
- 141127 23:30 pmac trip, reset
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- repaired Blastbus2 boards
- cycleFridge enable=3, on all rx
- 141127 02:12:52 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_010.sch
- 141123 12:00 wild heating event on all 5 rx, aborting
- weather: mostly clear, few clouds
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- replaced membrane nitrogen cylinder
- adjusted readhead 1A
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_009.sch
- 141120 11:00 az diff jumps
- 141120 23:00 pmac tripped
- 141121 03:48:24 paused to do star camera baffle tests
- 141121 12:00 more az diff jumps spoil the schedule
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- attached star camera forebaffle
- 141120 03:49:36 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_008.sch
- 141119 1:00 pmac tripped, reset at 19:00
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_007.sch
- masd0 unable to talk to dsp
- rebooted keck33, rmmod/modprobe mce_dsp, rebiased
- snow plow activity causing some shaking
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- swapped back to rx4 hk box
- rx4 SQUIDs seem better
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_006.sch
- starting late because of rx4 SQUID debugging
- stopped early to swap rx4 hk box
- unable to do thermal PID with spare box, aborting
- weather: clear during run
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- tuning/debugging rx4 SQUIDs after the cycle
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_005.sch
- reduced length because of starpointing earlier
- 141113 22:16:48 abort_schedule
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- noticed error in starpointing method, retrying
- schedule /home/keck/sch/starpoint_pole_manu_summer.sch
- az diff jumps during schedule smaller than tv offset
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_004.sch
- pmac tripped
- 141113 03:46:11 abort_schedule
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- 141112 03:47:15 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
- 141112 04:32:47 grabber is dark, retrying
- 141112 04:33:50 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_003.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_002.sch
- brief power outage at 141108 09:00, pump and compressor came back on, so we only lost about one scanset
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_001.sch
- problems with readhead A3
- az diff jump, data are good until jump and after resume
- 141106 12:22:24 resume_schedule
- 141106 bif wifi was turned back on
- mediator froze, restarted gcp and masd, didn't restart run since it was close to the end
- weather: mostly clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_48_000.sch
- first sch with new scan parameters, no problems encountered
- /home/keck/sch/runend.sch
- weather: mostly clear overhead, misty
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_241.sch
- pmac stopped
- huge az diff jump, rehomed, data are good until jump and after resume
- 141103 02:37:53 resume_schedule
- /home/keck/sch/runend.sch
- weather: misty, overcasted, warm
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_240.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, overcasted, blowing snow, clearing a bit but misty
- windows and baffles: windows clear, tiny bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_239.sch
- pmac tripped
- /home/keck/sch/runend.sch
- weather: clear, some thin clouds
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_238.sch
- pmac stopped, running again
- rx 1,4 cooling down, cycled fridge
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- drive problems, restarted gcp, masd, antenna computer
- strange heating on rx4, can't stop it
- rebotted all computers (not omega0) heating on rx1 as well
- unstopable heating on rx1, rx4, even with all cables disconnected
- a breif pump on the vacuum helped on rx4, rx1 compressor had to be shut off before any effect
- rx1 and rx4 both are cooling again
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_237.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- mediator froze, restarted mediator and masd
- rx0 he3 pump unresponsive, kept heating, restarted gcp, had to restart cycle
- 141025 01:58:38 Starting schedule: /home/keck/sch/fridgecycle.sch
- used time for starpointing while rx0 was cooling down
- 141025 08:46:58 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_236.sch
- fridgecycle for rx0
- /home/keck/sch/runend.sch
- weather: high winds, blowing snow, misty, clearing
- windows and baffles: clear
-
- cycleFridge enable=2, on rx=1,2,3,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_235.sch
- 141021 19:50 mediator froze
- restarted gcp and masd
- 141021 19:55:07 Starting schedule: /home/keck/sch/mce_autotune.sch
- 141021 19:56:41 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_235.sch
- /home/keck/sch/runend.sch
- 141022 14:30 breaker on compressor rx0 and wall tripped, rx0 started to warm up, FPU to 68K, highest temp at 20:55 around 110K at He4 pump
- after resetting breaker compressor started up fine, power everything looks ok
- weather: storm, blowing snow, overcasted, wind dying, clearing
- windows and baffles:
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_234.sch
- /home/keck/sch/runend.sch
- weather: high winds, overcasted, storm, blowing snow
- windows and baffles: windows clear, ton of snow in the baffle
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_233.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, wind picking up, getting overcasted, high winds, low vis
- windows and baffles: windows clear, quite some snow in and on baffles
-
- cycleFridge enable=2, on all rx
- rebooted keck36, restarted masd
- 141017 04:20:49 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
- 141017 04:54:10 abort_schedule, can't see enough stars
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_232.sch
- /home/keck/sch/runend.sch
- weather: slight overcast, clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- 141015 04:10:22 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
- 141015 04:18:10 abort_schedule, clouds moved in
-
- /home/keck/sch/mce_autotune.sch
- restarted keck36 and masd3 since it stopped
- /data/keckdaq/autoqueue/pending/9_kCMB_46_231.sch
- /home/keck/sch/runend.sch
- weather: windy, clearing
- windows and baffles: clear
-
- restarted masd, reconnected power to mce3
- cycleFridge enable=2, on all rx
- recharged comp 1, 3
- rx3 cooled down again
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_230.sch
- 141011 19:40 power outage, only for 2 sec, but pump didn't come back on, therefore all compressors shut off
- 141011 20:18:05 abort_schedule
- 141011 20:18:30 mceGeneric mce_zero_bias
- besides rx3, all rx recovered in an hour, but rx3 was warming up rapidly to about 10K on the FPU
- looks like rx3 won't recover from the outage and needs a cycle, therfore I stopped masd3 and powered off MCE for rx3
- restarting the run on the other 4 rx
- 141011 21:17:33 Starting schedule: /home/keck/sch/mce_autotune.sch
- 141011 21:19:07 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_230.sch
- /home/keck/sch/runend.sch
- weather: clear, thin clouds, wind picking up. blowing snow, misty
- windows and baffles: windows clear, some snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_229.sch
- /home/keck/sch/runend.sch
- weather: thin clouds
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_228.sch
- /home/keck/sch/runend.sch
- weather: clear, thin clouds
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_227.sch
- az diff jumps, small but over 30k
- 141006 02:42:31 resume_schedule
- 141006 05:25:23 resume_schedule
- 141006 05:54:11 abort_schedule
- stopped run, worked on az diff, spudws 1 froze, restarted gcp, masd
- 141006 07:02:13 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_227.sch
- 41006 07:07:54 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_227.sch
- 141006 08:30 pmac stopped ??
- one more az diff jump
- 141006 21:39:44 resume_schedule
- another az diff jump
- 141007 00:41:03 abort_schedule
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 2, 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_226.sch
- /home/keck/sch/runend.sch
- weather: clear, getting cold again, misty
- windows and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
- omega0 froze up and was not responsive to remote login or console, had to reboot
- had to mount /data manually
- 141003 05:13:08 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
- 141003 05:37:37 abort_schedule, looks clear, but missing to many stars, will try another day
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_225.sch
- 141001 15:00 pmac tripped, there was no apparent reason
- after restarting it tripped again, after a rehome it was fine again 141001 15:40
- masd1 stopped, rebooting keck34 and restarting masd1 didn't work, but shutting down keck 34
- for a few seconds and restarting masd1 worked
- /home/keck/sch/runend.sch
- weather: overcasted, clear
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_224.sch
- /home/keck/sch/runend.sch
- weather: slight overcast, overcasted, no wind, warm
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_223.sch
- /home/keck/sch/runend.sch
- weather: overcasted, warm, no wind
- windows and baffles: clear, lots of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_222.sch
- az diff jump, rehomed
- 140926 06:51:37 resume_schedule
- 140926 08:34:36 resume_schedule
- az diff jump, rehomed
- /home/keck/sch/runend.sch
- weather: slight overcast, high winds
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_221.sch
- az diff jump, data would be good but was around 50k, rehomed
- 140923 21:24:55 resume_schedule
- /home/keck/sch/runend.sch
- weather: wind picking up, some clouds
- windows and baffles: windows clear, some snow in and on baffles
-
- restarted gcp, masd
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- rx4 backpack powered off
- 140921 07:12:20 Starting schedule: /home/keck/sch/mce_autotune.sch
- rx4 backpack powered on
- 140921 07:16:45 Starting schedule: /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_220.sch
- mediator froze
- restarted gcp, masd
- 140922 21:31:38 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_220.sch
- /home/keck/sch/runend.sch
- weather: clear, some clouds
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_219.sch
- /home/keck/sch/runend.sch
- weather: clear, some mist
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- rx4 backpack connected
- /home/keck/sch/mce_autotune.sch
- rx4 backpack powered off and disconnected
- 140917 07:44:12 Starting schedule: /home/keck/sch/mce_autotune.sch
- rx4 backpack reconnected and powered on
- 140917 07:51:04 Starting schedule: /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_218.sch
- /home/keck/sch/runend.sch
- weather: mostly clear,clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_217.sch
- /home/keck/sch/runend.sch
- weather: clear, some clouds
- windows and baffles: windows clear
-
- cycleFridge enable=2, on all rx
- recharged comp 2, 3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_216.sch
- /home/keck/sch/runend.sch
- weather: clearing, clear, cold
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_215.sch
- /home/keck/sch/runend.sch
- weather: overcast, warm
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_214.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, overcasted
- windows and baffles: winows clear, some snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_213.sch
- small az-diff jump, just barely going over 30k, data would be good
- spudws1 froze, therefore aborted the run restarted spudws1, gcp, masd
- 140907 23:04:26 abort_schedule
- 140907 23:27:21 schedule /home/keck/sch/mce_autotune.sch
- 140907 23:28:54 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_213.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- 140907 06:26:23 schedule /home/keck/sch/starpoint_pole_manu_winter_lower_el_red.sch
- el drive started to oscillate on some stars
-
- rx4 backpack powered off and disconnected
- rx4 backpack reconnected and powered on
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_212.sch
- /home/keck/sch/runend.sch
- weather: overcasted, clearing
- windows and baffles: windows clear, some snow in and on baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 1, 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_211.sch
- az diff jump - data are good until jump and after resume
- 140903 21:45:34 resume_schedule
- /home/keck/sch/runend.sch
- weather: overcasted
- windows and baffles: windows clear, lots of snow in and on baffle
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_210.sch
- /home/keck/sch/runend.sch
- weather: clear, getting overcasted
- windows and baffles: windows clear, snow on and in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_209.sch
- /home/keck/sch/runend.sch
- weather: overcasted, clearing
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_208.sch
- /home/keck/sch/runend.sch
- weather: overcasted, high winds, blowing snow, overcasted, warm
- windows and baffles: each window had an about 3in patch of thin snow in the middle, lots of snow in and on baffle
-
- cycleFridge enable=2, on all rx
-
- rx4 backpack connected
- /home/keck/sch/mce_autotune.sch
- rx4 backpack powered off and disconnected
- 140826 09:21:16 Starting schedule: /home/keck/sch/mce_autotune.sch
- rx4 backpack powered on and reconnected
- 140826 09:29:32 Starting schedule: /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_207.sch
- mediator quit
- 140827 07:50:38 Starting schedule: /home/keck/sch/mce_autotune.sch
- /home/keck/sch/runend.sch
- weather: mostly overcaste, storm, warm, storm dying, clearing, total overcast again
- windows and baffles: windows clear, nearly no snow in and on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_206.sch
- /home/keck/sch/runend.sch
- weather: high winds, blowing snow, overcasted, storm, warm
- windows and baffles: windows clear, lots of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_205.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, wind picking up,, high winds, kind of clear overhead
- windows and baffles: windows clear, some snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_204.sch
- pmac stopped
- /home/keck/sch/runend.sch
- weather: clear, cold, getting windy
- windows and baffles: windows clear, some snow in and on the baffles
-
- cycleFridge enable=2, on all rx
- investigating noise on rx4 reseated mce cable and swapped power connector from rx3 <-> rx4
- restarted masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_203.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: windows clear, some snow on the baffles
-
- cycleFridge enable=2, on all rx
- 140818 07:30:59 schedule /home/keck/sch/starpoint_pole_manu_winter_lower_el_red.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_202.sch
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 2
- spudws1 froze, restarted gcp, masd, sync box
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_201.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_200.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: windows clear, very little snow in and on baffle
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_199.sch
- /home/keck/sch/runend.sch
- weather: misty, clear
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
- spudws1 froze, restarted spudws1, gcp, masd
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_198.sch
- /home/keck/sch/runend.sch
- weather: clear - misty
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_197.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_196.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- another He leak in Hi pressure az hose from comp 3 (rx0)
- preped ans swapped spare line
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_195.sch
- /home/keck/sch/runend.sch
- weather: clear, cold, getting misty, wind picking up
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_194.sch
- pmac stopped, missed first scanset
- /home/keck/sch/runend.sch
- weather: clear, cold
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_193.sch
- /home/keck/sch/runend.sch
- bif wifi was turned off
- weather: clear, cold
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_192.sch
- 140729 02:50:22 abort_schedule
- /home/keck/sch/runend.sch
- 140729 03:05:16 Starting schedule: /home/keck/sch/starpoint_pole_manu_winter_lower_el.sch
- weather: clear, cold
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_191.sch
- /home/keck/sch/runend.sch
- weather: overcasted, clearing, clear
- windows and baffles: windows clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_190.sch
- mediator stopped
- 140724 09:37:56 abort_schedule
- restarted gcp and masd
- 140724 09:39:39 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140724 09:41:32 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_190.sch
- /home/keck/sch/runend.sch
- big az diff spike
- 140724 22:39:11 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_190.sch
- did wifi test 140725 02:00 all log book entries start with "wifi test"
- weather: clear, very cold, mist moving in
- windows and baffles:
-
- cycleFridge enable=2, on all rx
- recharged comp 5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_189.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_188.sch
- /home/keck/sch/runend.sch
- weather: overcasted, clearing a bit, misty, warm
- windows and baffles: windows clear, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_187.sch
- keck 35, masd2 quit just before runend
- restarted keck33-37 and masd
- /home/keck/sch/runend.sch
- weather: winds dying, clear, cold, overcasted, warming up
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_186.sch
- 140714 04:46:19 suspend_schedule, az diff jump, data should be good
- 140714 04:54:42 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear, misty, high winds, blowing snow, clearing
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 1,3
- 140715 10:22:50 Starting schedule: /home/keck/sch/starpoint_pole_manu_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_185.sch
- /home/keck/sch/runend.sch
- weather: totally overcasted, high winds, blowing snow, clearing
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_184.sch
- /home/keck/sch/runend.sch
- weather: clear, misty, clearing
- windows and baffles: windows clear, some snow in and on the baffles
-
- cycleFridge enable=2, on all rx
- spudws1 froze
- restarted gcp, masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_183.sch
- /home/keck/sch/runend.sch
- weather: misty, blowing snow, clearing
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_182.sch
- az fiff jump, data are good until it starts jumping and after resuming schedule at
- 140708 01:56:18 resume_schedule
- 140708 21:38 pmac stopped
- 140709 03:15 waste barn bif wifi test, all log book entries start with "wifi test"
- 140709 04:58 end of wifi test
- /home/keck/sch/runend.sch
- weather: very misty, blowing snow
- windows and baffles: windows clear, quite a bit of snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_181.sch
- /home/keck/sch/runend.sch
- weather: clear, warming up, wind picking up, blowing snow, very misty
- windows and baffles: windows clear, quite a bit of snow in and on baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_180.sch
- az diff jump, data should be good since jump was below 100k (but over 30k)
- 140703 16:16:06 suspend_schedule
- 140703 16:25:42 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear, very cold
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_179.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, very little wind :)
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- 140701 10:57:24 Starting schedule: /home/keck/sch/starpoint_pole_manu_winter.sch
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_178.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- windows and baffles: windows clear, some snow on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_177.sch
- /home/keck/sch/runend.sch
- weather: clear, sporadic ground mist
- windows and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_176.sch
- /home/keck/sch/runend.sch
- weather: clear, blowing snow, but mostly clear overhead
- windows and baffles: windows clear, very little snow on the baffles
-
- rx4 is included again in the cycle
- cycleFridge enable=2, on all rx
- stopped masd, started power to mce4
- keck35 unresponsive, restarted keck 33-37
- restarted masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_175.sch
- /home/keck/sch/runend.sch
- weather: blowing snow, misty, mostly clear overhead, clearing
- windows and baffles: clear
-
- cycleFridge enable=2, on rx=0,1,2,3
- recharged comp 5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_174.sch
- /home/keck/sch/runend.sch
- weather: misty, mostly clear overhead
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on rx=0,1,2,3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_173.sch
- rx3 is back online
- rx4 cooldown started 140620 16:35
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, misty, mostly clear overhead
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on rx=0,1,2,3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_172.sch
- only running rx0,1,2
- keck33 totally unresponsive, had to reboot, missed first scanset
- because of the delay activated rx3 again, since it was down nearly at target temperature
- 140617 15:04:01 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140617 15:05:35 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_172.sch
- rx3 data might not be good for this run, since setup_rx3 is stuck in the queue
- but I consider the 100GHz data more important
- rx3 warmed up during the run, did cycle on rx3
- az diff jump, problems with 2A, data are good until jump and after resume at
- 140619 06:25:14 resume_schedule
- /home/keck/sch/runend.sch
- weather: high winds, misty, but mostly clear overhead, clear
- windows and baffles: clear
-
- cycleFridge enable=2, on rx=0,1,2
- rx3 cooling back down
- 11:46 started double cycle on rx3
- mce_zero_bias, masd off, disconnected power to mce3, stared masd 0,1,2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_171.sch
- big az diff jump
- 140616 06:40:38 suspend_schedule
- 140616 06:52:26 resume_schedule, data are good until jump and after resume
- arc welding in MAPO, intermittend between 140616 0100-0330
- compressor for rx3 shut off due to compressor problem
- swapped compressor with spare
- rx3 coldhead warmed up to about 25K
- /home/keck/sch/runend3.sch
- weather: very misty, high winds, blowing snow
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on rx=0,1,2,3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_170.sch
- /home/keck/sch/runend.sch
- got a leak in the N2 system, run out of N2, rx1 membrane was already vibrating a bit, others were still good
- weather: overcasted, windy, clearing but misty
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on rx=0,1,2,3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_169.sch
- arc welding in MAPO, intermittend between 140611 0100-0500
- /home/keck/sch/runend.sch
- weather: clear, overcasted, wind picking up
- windows and baffles: windows clear, very little snow in the baffles
-
- spudws1 froze, restarted spudws1, gcp, masd
- cycleFridge enable=2, on rx=0,1,2,3
- 140611 12:52:30 Starting schedule: /home/keck/sch/starpoint_pole_manu_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_168.sch
- /home/keck/sch/runend.sch
- weather: clear, thin clouds
- windows and baffles: clear
-
- cycleFridge enable=2, on rx=0,1,2,3
- started work on rx4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_167.sch
- skipped one scanset ?
- /home/keck/sch/runend.sch
- weather: clearing, thin clouds
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_166.sch
- He leak in Hi pressure line on rx4
- compressor shut off due to low pressure
- arc welding in MAPO, intermittend between 140605 0100-0500
- /home/keck/sch/runend.sch
- weather: blowning snow, overcasted, clearing
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_165.sch
- /home/keck/sch/runend.sch
- weather: misty, blowing snow, wind picking up, overcast, warm
- windows and baffles: windows about a 3x3in patch of snow in the center, tons of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_164.sch
- /home/keck/sch/runend.sch
- weather: getting overcasted, storm, wind over 30kts, wind dying, misty
- windows and baffles: windows clear, ton of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_163.sch
- /home/keck/sch/runend.sch
- weather: getting misty, wind picking up, clearing towards the end
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_162.sch
- masd4 stopped, restarted keck37 and masd4
- /home/keck/sch/runend.sch
- weather: misty, clearing,clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_161.sch
- pmac stopped, first scanset missing
- masd3 stopped, restarted keck36 and masd3
- 140528 09:23:20 starting schedule 7_ptonoff_01_004.sch
- all log entries start with "PT test"
- /home/keck/sch/runend.sch
- weather: overcasted, high winds, wind dying a bit, misty, clearer overhead
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- changed failed az line
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_160.sch
- /home/keck/sch/runend.sch
- weather: clouds, mist, clearing
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- 1B roller ceased, replaced with new one
- again el ozillation during snow schedule, changed snow el from 45 to 44, will see if that helps
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_159.sch
- /home/keck/sch/runend.sch
- 140524 09:47:06 starting schedule 7_ptonoff_01_003.sch
- all log entries start with "PT test"
- 140524 10:12:26 PT test end
- weather: clear, clouds moving in, misty
- windows and baffles: windows clear, some snow in and on baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_158.sch
- 140521 08:00 no updates on rx4, rebooted keck37, restarted masd4
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_157.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_156.sch
- 140516 15:59:46 abort_schedule
- "mce_zero_bias", stoped masd, turned off mce power
- exchanged DHi Az hose with N2 (the only one on this side)
- switch didn't cause a warm up, montoring lines
- 140516 17:14:10 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140516 17:15:49 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_156.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- MAJOR pressure loss in comp 4, 70psi in 2 days
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_155.sch
- /home/keck/sch/runend.sch
- weather: clear, mostly clear, bit misty
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- 140514 14:24:57 Starting schedule: /home/keck/sch/starpoint_pole_manu_winter.sch
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_154.sch
- /home/keck/sch/runend.sch
- weather: overcasted, improving, clear
- windows and baffles: windows clear, very little snow in the baffles
- el axis was oscillating by a small amount during snow.sch, restarted pamc went away
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_153.sch
- /home/keck/sch/runend.sch
- weather: overcasted
- windows and baffles: windows clear, lots of snow in and on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_152.sch
- /home/keck/sch/runend.sch
- weather: clear, wind pciking up, totally overcasted
- windows and baffles: windows clear, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_151.sch
- /home/keck/sch/runend.sch
- weather: clouds moving in,, mostly clear overhead
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
- Walt removed mediator patch
- restarted masd and gcp
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_150.sch
- mediator crashed
- restarted masd and gcp
- 140505 05:54:57 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140505 05:56:31 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_150.sch
- mediator crashed
- restarted masd and gcp
- 140506 03:56:39 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140506 03:58:49 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_150.sch
- mediator crashed
- restarted masd and gcp
- 140506 05:52:54 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140506 05:54:29 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_150.sch
- 140506 11:01:48 abort_schedule
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- restarted masd and gcp
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_149.sch
- mediator crashed
- restarted masd and gcp
- 140503 04:30:44 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140503 04:32:17 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_149.sch
- schedule stopped again, not keck33 this time, but same time as 2 days ago
- restarted masd and gcp
- 140504 06:46:43 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140504 06:48:17 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_149.sch
- /home/keck/sch/runend.sch
- weather: overcasted, warm, blowing snow, wind easying, clearing
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_148.sch
- 140501 04:46:17 abort_schedule
- new patch to mediator, restarted gcp and masd
- 140501 04:48:38 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140501 04:50:13 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_148.sch
- schedule chrashed
- 140502 04:26:14 Exiting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_148.sch
- also az-diff jump, rehomed
- 140502 05:31:08 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140502 05:39:20 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_148.sch
- kcck 33 unresponsive, had to hard reboot computer
- 140502 11:10:07 abort_schedule
- /home/keck/sch/runend.sch
- weather: overcast, warm, blowing snow
- windows and baffles: windows clear, lots of snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_147.sch
- /home/keck/sch/runend.sch
- weather: clear overhead, blowing snow, totally overcasted, warm, storm
- windows and baffles: windows clear, lots of snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_146.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, mostly clear overhead, blowing snow
- windows and baffles: windows clear, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_145.sch
- /home/keck/sch/runend.sch
- weather: clear, but blowing snow
- windows and baffles: windows clear, very little snow in the baffle
-
- cycleFridge enable=2, on all rx
- fixed leak on the nitrogen purge line
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_144.sch
- masd2 stopped and quit, stopped all masd
- rebooted keck35, restarted masd
- 140422 23:52:14 schedule /home/keck/sch/mce_autotune.sch
- 140422 23:53:48 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_144.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, blowing snow, bit hazy
- windows and baffles: windows clear, little snow in the baffles
-
- restarted syncbox, gcp, masd
- cycleFridge enable=3, on all rx
-
- /home/keck/sch/runend2.sch - not to tune rx=2 which FPU is at 8K
- /data/keckdaq/autoqueue/pending/9_kCMB_46_143.sch
- 140421 22:30 rx2 FPU went up to 22k !!! and rising
- tried to set all heaters tcModules, fridge and miscHeaters to 0, no effect
- FPU reached 37.5 K came down only after starting the He3 and He4 pump
- 140422 00:15 FPU came down to 18.5 K and leveled out there for the last hours
- will go into hardware test, will stop the run and turning off MCE power
- 140422 12:49:55 abort_schedule
- turning masd off, no change, but turning off MCE power made the tempearture to come down
- reached 3.9K turning MCE power back on, temperature rises again
- reseated all the MCE power cables and that solved the problem !?
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles: clear
-
- problems with rx2 cool down
- cycleFridge enable=1, on all rx
-
- cycleFridge enable=2, on all rx
- recharged comp 1,3
-
- /home/keck/sch/mce_autotune.sch
- 1_knoise_responsivity_9_006.sch
- 140419 22:47:30 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_142.sch
- rx2 warmed up early
- /home/keck/sch/runend2.sch
- weather: clear and cold
- windows and baffles: clear
-
- rx2 is behaving strange, FPU went down to .8K an then started to warm up again
- cycleFridge enable=1, on all rx
-
- cycleFridge enable=2, on all rx
- 140419 15:58:30 Starting schedule: /home/keck/sch/starpoint_pole_manu_winter.sch
- rx2 fridgecycle was strange, FPU warmed up to 6K
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_141.sch
- /home/keck/sch/runend.sch
- weather: totally overcasted, warm, then clearing, and good conditions for most of the run
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_140.sch
- /home/keck/sch/runend.sch
- weather: blowing snow, wind dying down with total overcast, hot
- windows and baffles: windows clear, a little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_139.sch
- /home/keck/sch/runend.sch
- weather: storm easing, clear periods, wind picking up again, thin clouds
- windows and baffles: windows clear, some snow in baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_138.sch
- 140412 about 0200 gcp froze, no monitor polts no updates in KeckViewer
- restarted gcp and masd
- az diff jump to 45k
- 140413 05:49:35 suspend_schedule
- rehomed
- 140413 06:02:56 resume_schedule
- rx2 warmed up to nearly 1k during homing !!
- /home/keck/sch/runend.sch
- restarted gcp and masd
- weather: high winds, blowing snow, thin clouds overhead, storm and blowing snow
- windows and baffles: windows clear, lots of snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_137.sch
- /home/keck/sch/runend.sch
- weather: very clear, storm moving in blowing snow, high winds
- windows and baffles: windows clear, some snow in and on the baffles
-
- restarted keck31-37, restarted gcp and masd
- cycleFridge enable=2, on all rx
- spudws1 froze, restarted spudws1, gcp, masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_136.sch
- /home/keck/sch/runend.sch
- weather: clear, very thin clouds
- windows and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_135.sch
- /home/keck/sch/runend.sch
- weather: hazy, blowing snow, clearing
- windows and baffles: windows clear, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_134.sch
- masd2 was unrepsonsive, also powercycled the sync box restarted gcp, masd
- 140403 20:05:55 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_134.sch
- /home/keck/sch/runend.sch
- weather: clear overhead, very clear, storm moving in, blowing snow, overcasted
- windows and baffles: some snow on lower corner of window, lots of snow in and on baffle
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_133.sch
- /home/keck/sch/runend.sch
- weather: clear above, blowing snow
- windows and baffles: windows clear, very little snow in and on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_132.sch
- az diff jump
- 140331 04:47:14 suspend_schedule
- rehomed
- 140331 04:52:21 resume_schedule
- <140331 07:18:22 suspend_schedule/li>
- rehomed
- 140331 07:27:00 resume_schedule
- 140331 07:47:33 suspend_schedule
- replaced A2 roller, was stuck, rehomed
- 140331 08:14:24 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear, clear above, wind picking up, blowing snow
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_131.sch
- /home/keck/sch/runend.sch
- weather: clear
- windows and baffles:
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_130.sch
- 140327 20:44:37 abort_schedule
- new increased trans_TES times
- 140327 20:44:56 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140327 20:46:31 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_130.sch
- /home/keck/sch/runend.sch
- 140328 13:24:03 abort_schedule
- gcp plots only updated the last 2 hours, restarted gcp and masd
- weather: clear, some thin clouds overhead, clearing again
- windows and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_129.sch
- /home/keck/sch/runend.sch
- weather: clear overhead
- windows and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_128.sch
- 140323 14:33:13 suspend_schedule
- az diff jump, rehomed since >30k
- 140323 14:45:14 resume_schedule
- /home/keck/sch/runend.sch
- weather: thin clouds, blowing snow on the ground, but mostly good
- window and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_dkrot_10_005.sch
- 140321 07:50:05 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_127.sch
- brief power outage at 130322 02:20
- rx4 was cold until runend :)
- /home/keck/sch/runend.sch
- weather: clear, cold
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- problems with rx4 TCM C,D wouldn't turn off, some cable-connector problem
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_126.sch
- 140320 about 0500 rx4 became noisy on some temp channels
- /home/keck/sch/runend.sch
- weather: clear, only very thin clouds, clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- 140318 18:28:12 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_125.sch
- /home/keck/sch/runend.sch
- weather: mostly overcasted, snowfall, clearing
- window and baffles: windows clear, quite a bit of snow in and on baffles
-
- restarted gcp, masd and syncbox
- cycleFridge enable=2, on all rx
- 140316 18:20:12 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
- thin clouds, can't see all the stars, will try agian with better conditions
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_124.sch
- rx0 stopped working no sync status no clk count no bolos
- 140315 22:47:53 suspend_schedule
- jump in az diff to 50k data would be good !!!
- <140315 22:56:07 resume_schedule/li>
- ARA pulser operational
- 01:26:20 140315 to 03:04:00 140315
- /home/keck/sch/runend.sch
- weather: hazy, overcasted, snowing, slight overcast
- window and baffles: windows clear, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_123.sch
- first cmb run without problems :)
- /home/keck/sch/runend.sch
- weather: frist half clear, than hazy, overcasted, some snow
- window and baffles: quite a bit of snow in the baffles, windows clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_122.sch
- 140311 15:14:57 suspend_schedule
- pmac jump to 31000, would be totally fine, but since you cut so low - rehomed the telescope
- 140311 15:20:42 resume_schedule
- 140311 17:00:00 suspend_schedule
- another pmac jump, this time it was big one
- 140311 17:12:34 resume_schedule
- mediator crashed again, restarted gcp and masd, very sluggish on spudws1
- another mediator problem, restarted keck31, keck32 and spudws1, restarted syncbox
- 140311 20:27:39 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140311 20:31:06 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_122.sch
- 140312 14:26:41 abort_schedule
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_121.sch
- PMAC stopped, restarted PMAC
- gcp (meditator) stopped, restarted masd and gcp
- 140310 02:23:03 Starting schedule: /home/keck/sch/mce_autotune.sch
- 140310 02:24:38 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_121.sch
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
CMB 2014
-
- BAM removed, cooling down again
- BAM frame removed
- cycleFridge enable=2, on all rx
- 140308 11:32:33 cycleFridge enable=4, on all rx
- 140308 20:44:28 cycleFridge enable=1, on all rx
- baffles are mounted
-
- /home/keck/sch/mce_autotune.sch
- 140307 02:12:42 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31i_013.sch
- 140307 09:53:15 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_013.sch
- preparing to remove BAM
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 140305 14:15:22 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31h_013.sch
- 140305 21:57:13 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31g_013.sch
- 140306 05:39:00 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_013.sch
- 140306 13:19:55 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31f_013.sch
- /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
- recharged comp 1, 2, 3
-
- /home/keck/sch/mce_autotune.sch
- 140304 01:59:41 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_013.sch
- 140304 09:39:22 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31b_013.sch
- 140304 17:19:49 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_013.sch
- 140305 01:00:40 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31d_013.sch
- /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
- 140303 12:18:25 Starting schedule: /home/keck/sch/fridgecycle.sch
- 140303 22:07:05 Starting schedule: /home/keck/sch/fridgecycle1.sch
- fixed chopper
-
- rx4 wouldn't cool down below 360mk and didn't tune, restarted keck37
- /home/keck/sch/mce_autotune.sch
- rx4 temperature came down to 268mk
- /home/keck/sch/mce_autotune.sch
- 140302 23:10:10 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_011.sch
- chopper broke again
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 140301 07:35:37 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31i_010.sch
- 140301 15:15:36 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_010.sch
- 140301 22:55:39 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31h_011.sch
- 140302 06:36:45 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31g_011.sch
- /home/keck/sch/mce_autotune.sch
- keck37 didn't get a tuning again, during the last run the bolos showed "0"
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 140227 19:31:37 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_010.sch
- 140228 03:11:34 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31f_010.sch
- 140228 10:52:32 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31g_010.sch
- 140228 18:32:35 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31h_010.sch
- around 140228 2130 adjusted GPS time, GPS time wasn't syncing to keck31, exact time after 140228 2138
- time was about 10min slow
- chopper broke sometime during the last schedule
- /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 140226 03:08:51 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_010.sch
- 140226 10:48:50 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31b_010.sch
- 140226 18:29:09 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_010.sch
- 140227 02:09:59 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31d_010.sch
- /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 140224 11:55:51 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31g_009.sch
- 140224 19:35:47 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31h_009.sch
- 140225 03:17:32 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31i_009.sch
- 140225 10:57:59 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_009.sch
- /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 140222 23:50:45 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_009.sch
- 140223 07:31:41 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31d_009.sch
- 140223 15:13:26 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_009.sch
- 140223 22:54:06 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31f_009.sch
- /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 140221 09:19:33 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_008.sch
- 140221 17:00:09 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31d_008.sch
- changed mirror position: A,B 14.15/16in E,F 55.5in G,H 28.14/16in
- 140222 02:44:56 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31b_009.sch
- 140222 10:26:09 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_009.sch
- /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
-
- restarted masd
- /home/keck/sch/mce_autotune.sch
- 140219 20:39:17 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31i_007.sch
- 140220 04:19:15 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_007.sch
- 140220 11:59:40 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31b_008.sch
- 140220 19:40:35 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_008.sch
- /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- again some problems with the tuning, not all mce received a tuning file keck36 and keck37 didn't cool
- down below 300mk, they got stuck somehow just above
- restarted masd
- 140218 08:08:50 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_007.sch
- 140218 15:48:28 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31f_007.sch
- 140218 23:29:22 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31g_007.sch
- 140219 07:09:51 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31h_007.sch
- /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
-
- 140216 15:32:43 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31b_007.sch
- /home/keck/sch/mce_autotune.sch
- 140216 23:14:12 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_007.sch
- aborted schedule to run autotune.sch
- /home/keck/sch/mce_autotune.sch
- 140217 00:14:54 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_007.sch
- 140217 07:54:32 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_007.sch
- 140217 15:35:47 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31d_007.sch
- all bolometers show "0" some very strange behavior of the mce computers, mce_autotune doesn't seem to
- write tuning data to all mce computers
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 140215 02:43:41 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31g_006.sch
- 140215 10:24:42 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31h_006.sch
- 140215 18:06:28 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31i_006.sch
- 140216 01:46:57 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_006.sch
- /home/keck/sch/runend.sch
-
- cycleFridge enable=2, on all rx
- cycleFridge enable=1, on all rx
-
- /home/keck/sch/mce_autotune.sch
- chopper around 10.4Hz
- 140213 10:05:10 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_006.sch
- rx0 warmed up right after schedule start
- 140213 17:45:08 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31d_006.sch
- adjusted chopper to 14.4Hz
- 140214 02:16:04 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_006.sch
- 140214 09:56:09 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31f_006.sch
-
- cycleFridge enable=2, on all rx
Winter 2014
-
- 7_ffflat_dslmast_31b_005.sch
- dk angle = -50
- Rerunning the same schedule as previous.
- /home/keck/sch/mce_autotune.sch
-
- 7_ffflat_dslmast_31b_004.sch
- dk angle = -50
- Aborted schedule to install forebaffle heater and thermometer cables. Schedule was more than three-quarters done at the time we aborted.
-
- 7_ffflat_dslmast_31a_003.sch
- dk angle = -122
- Überchopper running at ∼9 Hz.
- Ffflat in normal (back) position.
- First attempt at this schedule started at 140212 03:32:34, but stopped due to gcp crash. Restarting from the beginning.
-
-
- 7_ffflat_rps_keck_01c_004.sch
- dk angle = +22
- Done with 150 GHz RPS.
-
-
- 7_ffflat_rps_keck_01a_007.sch
- Picking up where we left off from the last schedule.
- rx0 UC ran out not very long after the fridge cycle, but it doesn't matter because we are using a 150 GHz source.
-
- 9_fridgecycle_001.sch
- Restarted antenna layer before fridge cycle, so the TES bias should turn on at 600 mK instead of 700 mK.
-
- 7_ffflat_rps_keck_01a_006.sch
- dk angle = -122
- Aborted schedule at 140209 06:12:53 UTC for a fridge cycle. Finished six of 21 elevation steps.
-
- 7_ffflat_rps_keck_01e_007.sch
- dk angle = +166
- First two attempts to start the schedule canceled almost immediately because the rps_get command was taking longer than the 10 second timeout (maybe bad network latency today?). Increased the rps_get timeout to 30 seconds in rpslib.sch.
-
- 9_fridgecycle_001.sch
- Applying bias to TES starting when FPU hits 700 mK. Bias level is 2500 for rx0, 5000 for others.
- rx0 focal plane cooled successfully with these settings.
-
- 7_ffflat_rps_keck_01d_008.sch
- dk angle = +94
- Reran one row at el offset = -6.4, which was affected by the mount stall in the previous schedule.
-
- 7_ffflat_rps_keck_01d_007.sch
- dk angle = +94
- Telescope stalled at 2014-02-06 10:46:24 UTC. Didn't catch it until morning. Restarted scanning at 19:25:23 UTC. Affected row is el offset = -6.4
-
-
- 7_ffflat_rps_keck_01b_003.sch
- dk angle = -50
- Attenuator settings: #2 = 4.50 (-10 dB), #3 = 3.80 (-10 dB). For more details of source configuration, see source logbook entry from 2014-02-04.
-
-
-
- 7_ffflat_rps_keck_01d_006.sch
- Redid the last two elevation steps at dk angle = +94, because they seem to be missing due to gcp problem during a previous schedule.
- Done with 100 GHz RPS.
-
- 7_ffflat_rps_keck_01e_006.sch
- dk angle = +166
- Rehomed mount before starting the schedule.
-
- 7_ffflat_rps_keck_01d_005.sch
- Picking up where we left off from the last schedule.
- Right when the schedule ended, we had some gcp trouble and had to restart gcp, including masd. I think that all of the data from this schedule should be fine, but we should check it.
-
-
- 7_ffflat_rps_keck_01d_004.sch
- dk angle = +94
- Aborted schedule at 140201 23:10:45 UTC for fridge cycle. Finished 17 of 21 elevation steps.
-
- 7_ffflat_rps_keck_01c_003.sch
- Picking up where we left off from the previous schedule.
-
-
- 7_ffflat_rps_keck_01c_002.sch
- dk angle = +22
- Before starting schedule, homed the mount. Also decreased RPS temperature control setpoint from 280K to 275K, because it is too cold to maintain the higher setpoint.
- Aborted the schedule at 140131 04:18:17 UTC for fridge cycle. Finished five of 21 elevation steps.
-
- 7_ffflat_rps_keck_01b_002.sch
- dk angle = -50
-
- 9_fridgecycle_001.sch
- Double cycle, will again attempt to tune squids and bias detectors automatically at 750 mK.
-
- 7_ffflat_rps_keck_01a_005.sch
- Picking up where we left off from the previous schedule. Schedule finished successfully.
-
- 7_ffflat_rps_keck_01a_004.sch
- Now targeting dslCal5, ∼1° shift for improved scan centering compared to dslCal4.
- dk angle = -122
- Source attenuators: Rocky = 4.00 (-18 dB), Severe Backlash = 7.80 (-10 dB).
- See source logbook entries from 2014-01-21, 2014-01-27, 2014-01-28 for more details of source configuration.
- Schedule exited during 13th elevation step because the RPS laptop decided to try to update Labview.
-
- Triple cycle
- Using new fridge cycle code that tunes squids and biases detectors after FPU temperature falls below 750 mK. However, masd wasn't running, so the squid tuning and detector bias schedules didn't do anything.
-
- 7_ffflat_moon_keck_03_000.sch
- Moon elevation = 17° and rising.
- Sun is offset from the moon by 70° in the positive azimuth direction, but this distance will decrease over the next week as the moon sets.
- Very nice weather. Waning crescent moon clearly visible by eye.
- Schedule includes scans at five dk angles: -194, -122, -50, +22, +94.
- First attempt to run schedule at 140126 04:09:42 was aborted after 80 minutes because the telescope was not tracking moon correctly. Mysterious problem: used the online pointing model for slew but not track. Fixed by restarting gcp.
-
- Installed trapezoidal frame, mounted mirror, and tipped up to el=90 on day 1. Cryostat 4K temperatures rose to ∼35K during mirror installation. MCEs off during mirror installation.
- Hoisted mirror into observing position on day 2.
-
- 9_kCMB_47_001.sch
- rx0 fridge cycle looks much better after Helium recharge yesterday.
- Fixed the problem that we were doing too many scans in the galactic scansets. Number of scans per scanset is 51 for phase D (galaxy, 50 minute scansets) or 102 for phases B, C, E, and F (CMB, 100 minute scansets). Still have extra time in the CMB scansets, so we can probably increase the number of scans further.
- Aborted schedule at 140123 23:06:20 for detector investigations, forebaffle removal, ffflat frame installation.
-
- 9_kCMB_47_000.sch — potential 2014 CMB schedule with 100 minute scansets
- Before starting the schedule, cycled fridges, tuned squids, and homed the mount. rx0 cycle was slow due to increased 4K temperature. Need to add He.
- Missed first scanset of phase B because the rx0 fridge cycle took so long.
- Found one schedule bug: tried to do 102 scans for the galactic scansets, which are still just 50 minutes long.
-
- 9_kCMB_46_120.sch
- Started schedule late after finishing forebaffle loading measurements. Skipped first seven scansets of Phase B.
- Weather excellent at the start of the schedule, but alternated clear and overcast during the course of the schedule.
-
- 1_forebaffle_on_off_4_007.sch
- Rebiased rx4 detectors, then redo the forebaffle loading measurement for that rx only.
- Weather still looks great.
-
- 1_forebaffle_on_off_4_006.sch
- Excellent weather.
- Kirit and Colin working the forebaffle simulators. Martin coordinating from the control room via intercom.
- Aborted schedule partway through rx4 because we discovered that many rx4 detectors were in some bad, noisy state.
-
- 9_fridgecycle_001.sch
- Schedule started running much earlier, but contained an until statement to wait until 23:00 LST. Intended to get us synced up with the CMB observing schedule.
-
-
- 7_sidelobes_mapomast_09_003.sch
- Forebaffles off
- All attenuators set to 0.2 i.e. max power
- Source polarization vertical
-
-
- 7_sidelobes_mapomast_10_002.sch
- Finishing up the last two dk angles that we didn't get from the previous schedule.
-
-
- 7_sidelobes_mapomast_10_001.sch
- Sidelobe mapping schedule with 180° az scans.
- Removed 90° twists. Back to vertical source polarization.
- Source power unchanged from the last schedule, targeting ∼1000 ADU.
- 140114 20:35:42 — Aborted schedule because rx1 fridge is running out. Finished eight of ten dk angles. Still need to do dk = -194, -158.
-
- 7_sidelobes_mapomast_10_000.sch
- Sidelobe mapping schedule with 180° az scans.
- Source power target is ∼1000 ADU, determined from checking a couple of pixels. Source 1 attenuators: att2 = 5.5 (-15 dB), att3 = 5.0 (-20 dB). Source 2 attenuators: Rocky = 4.3 (-20 dB), Severe Backlash = 9.0 (-20 dB). See source logbook posting from 2014-01-13 for more details.
- Still have 90° twists installed for both sources. Source polarization horizontal.
-
-
- 7_sidelobes_mapomast_09_002.sch
- Inserted 90° twists for both sources. Source polarization now horizontal.
- Azimuth encoders fixed up, so az diff values are better behaved. Max az diff is ∼20000 by the end of the schedule.
-
- 9_fridgecycle_001.sch
- Added He to compressor station 3 (rx0) and 4 (rx3) before cycling. Noticeable improvement in rx0 4K temperature and fridge cycle performance.
-
- 7_sidelobes_mapomast_09_001.sch
- Restart of 7_sidelobes_mapomast_09_000.sch after mount failure
- Started at dk= -86
-
- 1_knoise_responsivity_9_005.sch
- Some clouds on the horizon, but downwind. Nice blue skies overhead.
- Modified the schedule to wait for 1000 seconds after trans_tes (instead of 500 seconds) because we are blasting rx0 and rx2 so much.
- Before starting the schedule, auto-tuned squids and rehomed the mount.
-
-
- cycleFridge enable=2
- rx0 and rx1 cycles are noticeably worse than the others
-
- 7_sidelobes_mapomast_09_000.sch
- New version of sidelobes schedule uses 380 degree scan with slower acceleration.
- Updated source temperature setpoints: 280K for source 1 (150 GHz), 295K for source 2 (100 GHz).
- 140108 01:15:40 -- Aborted schedule after we couldn't recover from an azimuth fatal following error. Finished dk=-122 only.
-
- 7_sidelobes_mapomast_08_001.sch
- Restart of 7_sidelobes_mapomast_08_000.sch after bias update, PID temperature change
- Mount stalled during scan—fatal following error on az axis. Caught it at approximately 2013-01-07 08:10:00 UTC, but I'm not sure how long it had been stopped for. We saw this in the previous attempt of this schedule as well. I was able to get going again by using pmacterm to jog the axes and then restart the motion control program.
- The same mount stall happened again, ∼10 minutes later. Both times, it happens at the very start of the az scan, after already completing the elevation step. However, we did successfully start on az scan in between the two stalls. Possibly getting worse at lower elevation? Possible dk dependence?
- 140107 17:26:14 -- Aborted schedule after finding it stalled the next morning. Got to el=72 at dk=-50 (i.e. just started the third dk angle of the schedule).
-
- 7_sidelobes_mapomast_08_000.sch
- All attenuators at 0.20
- Both sources (100, 150 GHz) polarization vertical
- 55' from source horn to MAPO roof
- Forebaffles on
- Using new FSL mount settings pan=78 deg. tilt=50 deg.
- Saw very large power (unlocked TES) on Rx0 (tile 1 column 7) and Rx1 (tile 1 column 8)
- 100 GHz source setpoint was 280 K (same as 150 GHz source), but it climbed too high after we had the source powered for a while. Increased the setpoint to 285 K at approximately 2014-01-07 03:20:00 UTC.
- Aborted schedule for bias update of Rx2, 3
-
- 1_forebaffle_on_off_4_005.sch
- Perfect weather.
- Went to lunch after Rx 2.
- Mount was unable to automatically slew in deck for a couple receivers. Did this manually in PMAC after temporarily lowering in EL. Shouldn't affect data.
-
- 1_keck_5rx_UCenthalpy_001.sch
- Measurement started at 131231 01:52:11
- no blanking plates, no forebaffles
- all membranes on
- schedule aborted manually once all fridges warmed up
-
- 1_knoise_responsivity_Al_1_001.sch
- no blanking plates, no forebaffles
- no membrane broken on Rx?
- Blue sky
-
- 1_knoise_responsivity_9_004.sch
- no blanking plates, no forebaffles
- no membrane broken on Rx?
- Blue sky
-
- 300 steps/s, 4 half scans
- Out of order to minimize goniometer resets (here pointings in order, times out of order)
- 131228 04:13:31 - 131228 04:23:27 Tile 1 upper left, 131228 03:47:24 - 131228 03:57:18 Tile 1 middle left, 131228 03:05:58 - 131228 03:15:51 Tile 1 lower left
- 131228 04:00:00 - 131228 04:09:55 Tile 1 upper middle, 131228 03:17:29 - 131228 03:27:22 Tile 1 middle middle, 131228 02:38:48 - 131228 02:48:42 Tile 1 lower middle
- 131228 03:29:23 - 131228 03:39:17 Tile 1 upper right, 131228 02:50:46 - 131228 03:00:38 Tile 1 middle right, 131228 02:11:24 - 131228 02:21:51 Tile 1 lower right
- 131228 08:36:32 - 131228 08:46:27 Tile 2 upper right, 131228 07:37:38 - 131228 07:47:34 Tile 2 middle right, 131228 06:47:39 - 131228 06:57:22 Tile 2 lower right
- 131228 01:14:24 - 131228 01:24:21 Tile 2 upper middle, 131228 08:25:04 - 131228 08:35:01 Tile 2 middle middle, 131228 07:24:13 - 131228 07:34:09 Tile 2 lower middle
- 131228 01:57:13 - 131228 02:08:43 Tile 2 upper left, 131228 01:01:18 - 131228 01:11:18 Tile 2 middle left, 131228 08:13:48 - 131228 08:23:44 Tile 2 lower left
- 131228 04:29:41 - 131228 04:39:35 Tile 3 lower right, 131228 04:53:40 - 131228 05:03:34 Tile 3 middle right, 131228 05:31:07 - 131228 05:41:00 Tile 3 upper right
- 131228 04:42:00 - 131228 04:51:54 Tile 3 lower middle, 131228 05:19:17 - 131228 05:29:11 Tile 3 middle middle, 131228 06:36:12 - 131228 06:46:05 Tile 3 upper middle
- 131228 05:07:59 - 131228 05:17:52 Tile 3 lower left, 131228 06:24:26 - 131228 06:34:22 Tile 3 middle left, 131228 07:00:38 - 131229 07:10:32 Tile 3 upper left
- 131228 00:23:07 - 131228 00:33:00 Tile 4 lower left, 131228 01:27:28 - 131228 01:37:20 Tile 4 middle left, 131228 02:26:05 - 131228 02:35:59 Tile 4 upper left
- 131228 07:49:11 - 131228 07:59:07 Tile 4 lower middle, 131228 00:34:54 - 131228 00:44:48 Tile 4 middle middle, 131228 01:44:37 - 131228 01:54:33 Tile 4 upper middle
- 131228 07:12:13 - 131228 07:22:07 Tile 4 lower right, 131228 08:00:33 - 131228 08:10:30 Tile 4 middle right, 131228 00:46:14 - 131228 00:56:12 Tile 4 upper right
- Don't use the below, pointing offset on Y axis!!!
- 131227 23:01:26 - 131227 23:11:26 Tile 2 upper right, 131227 22:00:08 - 131227 22:10:44 Tile 2 middle right, 131227 21:20:14 - 131227 21:30:08 Tile 2 lower right
- 131227 22:50:02 - 131227 22:59:56 Tile 2 middle middle, 131227 21:45:33 - 131227 21:55:26 Tile 2 lower middle
- 131227 22:38:40 - 131227 22:48:32 Tile 2 lower left
- 131227 20:53:51 - 131227 21:03:43 Tile 3 upper middle
- 131227 20:29:29 - 131227 20:39:21 Tile 3 lower left, 131227 20:42:15 - 131227 20:52:07 Tile 3 middle left, 131227 21:05:15 - 131227 21:15:09 Tile 3 upper left
- 131227 22:13:00 - 131227 22:22:53 Tile 4 lower middle
- 131227 21:32:37 - 131227 21:42:31 Tile 4 lower right, 131227 22:24:30 - 131227 22:34:23 Tile 4 middle right
-
- Don't use, pointing offset on Y axis!!!
- 300 steps/s, 4 half scans
- Out of order to minimize goniometer resets (here pointings in order, times out of order)
- 131227 08:43:20 - 131227 08:53:47 Tile 3 lower right, 131227 09:10:36 - 131227 09:20:29 Tile 3 middle right, 131227 09:36:42 - 131227 09:46:34 Tile 3 upper right
- 131227 09:24:16 - 131227 09:34:10 Tile 3 lower middle, 131227 09:48:11 - 131227 09:58:03 Tile 3 middle middle
-
- 300 steps/s, 4 half scans
- 131226 22:41:53 - 131226 22:52:07 Tile 3 lower right, 131226 22:55:22 - 131226 23:05:13 Tile 3 middle right, 131226 23:07:10 - 131226 23:17:22 Tile 3 upper right
- 131226 23:23:29 - 131226 23:33:22 Tile 3 lower middle, 131226 23:35:00 - 131226 23:44:53 Tile 3 middle middle, 131227 00:45:18 - 131227 00:55:15 Tile 3 upper middle
- 131227 00:59:10 - 131227 01:09:04 Tile 3 lower left, 131227 01:10:32 - 131227 01:20:25 Tile 3 middle left, 131227 01:22:02 - 131227 01:31:55 Tile 3 upper left
- 131227 01:36:17 - 131227 01:46:45 Tile 4 lower left, 131227 01:48:32 - 131227 01:58:15 Tile 4 middle left, 131227 01:59:51 - 131227 02:10:10 Tile 4 upper left
- 131227 02:17:26 - 131227 02:27:20 Tile 4 lower middle, 131227 02:28:56 - 131227 02:38:49 Tile 4 middle middle, 131227 02:40:21 - 131227 02:50:19 Tile 4 upper middle
- 131227 02:55:00 - 131227 03:04:53 Tile 4 lower right, 131227 03:06:30 - 131227 03:16:26 Tile 4 middle right, 131227 03:18:04 - 131227 03:28:01 Tile 4 upper right
-
- Measurement started at 131225 22:15:53
- 3_keck_2rx_4Kloading_002.sch
- FTS was installed on Rx1
- Other Rx were covered by protective wood
- no blanking plates, no forebaffles
- membrane broken on Rx?
-
- 2_keck_2rx_UCloading_002.sch
- FTS was installed on Rx1
- Other Rx were covered by protective wood
- no blanking plates, no forebaffles
- membrane broken on Rx?
-
- 300 steps/s, 4 half scans
- 131223 01:04:16 - 131223 01:14:09 Tile 1 upper left, 131223 01:16:34 - 131223 01:27:02 Tile 1 middle left, 131223 01:28:41 - 131223 01:38:38 Tile 1 lower left
- 131223 03:06:26 - 131223 03:16:23 Tile 1 upper middle, 131223 03:17:50 - 131223 03:27:43 Tile 1 middle middle, 131223 03:29:05 - 131223 03:38:54 Tile 1 lower middle
- 131223 03:43:08 - 131223 03:53:03 Tile 1 upper right, 131223 03:54:59 - 131223 04:04:54 Tile 1 middle right, 131223 04:06:22 - 131223 04:16:17 Tile 1 lower right
- 131223 04:20:38 - 131223 04:30:34 Tile 2 upper right, 131223 04:32:01 - 131223 04:42:01 Tile 2 middle right, 131223 04:44:19 - 131223 04:54:15 Tile 2 lower right
- 131223 05:01:09 - 131223 05:11:04 Tile 2 upper middle, 131223 05:12:20 - 131223 05:22:32 Tile 2 middle middle, 131223 05:23:50 - 131223 05:33:48 Tile 2 lower middle
- 131223 07:06:29 - 131223 07:16:22 Tile 2 upper left, 131223 07:17:50 - 131223 07:27:44 Tile 2 middle left, 131223 07:29:02 - 131223 07:38:54 Tile 2 lower left
-
- 300 steps/s, 4 half scans
- 131222 20:58:43 - 131222 21:08:36 Tile 1 middle middle
- 131222 21:17:54 - 131222 21:27:50 Tile 2 middle middle
- 131222 21:29:59 - 131222 21:39:54 Tile 3 middle middle
- 131222 21:41:52 - 131222 21:51:47 Tile 4 middle middle
-
- 300 steps/s, 4 half scans
- 131222 02:35:07 - 131222 02:44:59 Tile 1 upper left, 131222 02:47:26 - 131222 02:57:17 Tile 1 middle left, 131222 02:58:57 - 131222 03:09:09 Tile 1 lower left
- 131222 03:16:29 - 131222 03:26:26 Tile 1 upper middle, 131222 03:28:22 - 131222 03:38:19 Tile 1 middle middle, 131222 03:39:42 - 131221 03:49:36 Tile 1 lower middle
- 131222 03:56:05 - 131222 04:05:59 Tile 1 upper right, 131222 04:07:19 - 131222 04:17:11 Tile 1 middle right, 131222 04:19:10 - 131222 04:29:03 Tile 1 lower right
- 131222 04:33:02 - 131222 04:42:53 Tile 2 upper right, 131222 04:44:21 - 131222 04:54:14 Tile 2 middle right, 131222 04:55:45 - 131222 05:05:39 Tile 2 lower right
- 131222 05:09:26 - 131222 05:19:19 Tile 2 upper middle, 131222 05:20:43 - 131222 05:30:39 Tile 2 middle middle, 131222 05:34:29 - 131222 05:44:24 Tile 2 lower middle
- 131222 07:03:03 - 131222 07:12:56 Tile 2 upper left, 131222 07:14:35 - 131222 07:24:34 Tile 2 middle left, 131222 07:26:02 - 131222 07:36:05 Tile 2 lower left
- 131222 07:40:56 - 131222 07:50:55 Tile 3 lower right, 131222 07:52:30 - 131222 08:02:24 Tile 3 middle right, 131222 08:03:54 - 131222 08:13:48 Tile 3 upper right
- 131222 08:17:17 - 131222 08:27:10 Tile 3 lower middle, 131222 08:28:38 - 131222 08:38:32 Tile 3 middle middle, 131222 08:40:05 - 131222 08:49:59 Tile 3 upper middle
- 131222 08:53:18 - 131222 09:03:22 Tile 3 lower left, 131222 09:04:59 - 131222 09:14:55 Tile 3 middle left, 131222 09:16:18 - 131222 09:26:12 Tile 3 upper left
- 131222 09:30:31 - 131222 09:40:25 Tile 4 lower left, 131222 09:41:59 - 131222 09:51:52 Tile 4 middle left, 131222 09:53:29 - 131222 10:03:23 Tile 4 upper left
- 131222 10:06:56 - 131222 10:16:54 Tile 4 lower middle, 131222 10:18:34 - 131222 10:28:29 Tile 4 middle middle, 131222 10:30:00 - 131222 10:39:54 Tile 4 upper middle
- 131222 10:43:09 - 131222 10:53:02 Tile 4 lower right, 131222 10:54:15 - 131222 11:04:08 Tile 4 middle right, 131222 11:05:28 - 131222 11:15:22 Tile 4 upper right
-
- 1_keck_2rx_ICloading_002.sch
- FTS was installed on Rx2
- Other Rx were covered by protective wood
- no blanking plates, no forebaffles
- membrane broken on Rx?
-
- 300 steps/s, 4 half scans
- 131221 02:12:01 - 131221 02:22:00 Tile 1 upper left, 131221 03:09:05 - 131221 03:19:24 Tile 1 middle left, 131221 03:23:16 - 131221 03:33:11 Tile 1 lower left
- 131221 03:36:23 - 131221 03:46:18 Tile 1 upper middle, 131221 03:51:22 - 131221 04:01:29 Tile 1 middle middle, 131221 04:04:45 - 131221 04:14:39 Tile 1 lower middle
- 131221 04:18:22 - 131221 04:28:18 Tile 1 upper right, 131221 04:34:04 - 131221 04:43:58 Tile 1 middle right, 131221 04:47:10 - 131221 04:57:05 Tile 1 lower right
- 131221 05:02:06 - 131221 05:12:02 Tile 2 upper right, 131221 05:17:41 - 131221 05:27:36 Tile 2 middle right, 131221 05:31:00 - 131221 05:40:55 Tile 2 lower right
- 131221 07:25:49 - 131221 07:35:48 Tile 2 upper middle, 131221 07:38:49 - 131221 07:49:07 Tile 2 middle middle, 131221 07:52:28 - 131221 08:02:24 Tile 2 lower middle
- 131221 08:11:08 - 131221 08:21:06 Tile 2 upper left, 131221 08:24:11 - 131221 08:34:06 Tile 2 middle left, 131221 08:37:09 - 131221 08:47:08 Tile 2 lower left
- 131221 08:53:36 - 131221 09:03:33 Tile 3 lower right, 131221 09:10:46 - 131221 09:20:45 Tile 3 middle right, 131221 09:23:12 - 131221 09:33:08 Tile 3 upper right
- 131221 09:39:31 - 131221 09:49:29 Tile 3 lower middle, 131221 09:51:59 - 133221 10:01:53 Tile 3 middle middle, 131221 10:05:02 - 10:14:58 Tile 3 upper middle
- 131221 10:27:13 - 131221 10:37:10 Tile 3 lower left, 131221 10:41:47 - 131221 10:51:44 Tile 3 middle left, 131221 10:54:12 - 131221 11:04:30 Tile 3 upper left
- 131221 11:11:09 - 131221 11:21:59 Tile 4 lower left, 131221 11:26:04 - 131221 11:35:59 Tile 4 middle left, 131221 11:38:29 - 131221 11:48:13 Tile 4 upper left
- 131221 11:53:01 - 131221 12:02:55 Tile 4 lower middle, 131221 12:05:05 - 131221 12:15:02 Tile 4 middle middle, 131221 12:17:31 - 131221 12:27:33 Tile 4 upper middle
- 131221 12:33:10 - 131221 12:43:08 Tile 4 lower right, 131221 12:45:38 - 131221 12:55:44 Tile 4 middle right, 131221 12:57:50 - 131221 13:07:51 Tile 4 upper right
-
- 1_forebaffle_on_off_4_004.sch
- Forebaffle on/off for Rx3
- 3 sets of on/off with all 4 heights
- 1 set of partial loadcurves with the fb on/off
-
- 9_fridgecycle.sch. enable=2.
- Rx1, Rx3, Rx4.
-
- Rx1, Rx3, Rx4 in the mount. IC, UC, and 4K loading and G schedules.
- 2_keck_3rx_UCloading_001.sch
- 1_keck_3rx_ICloading_001.sch
- 3_keck_3rx_4Kloading_001.sch
-
- Rx1 back in the mount on 20131202 (NZ time)
- 1_forebaffle_on_off_4_003.sch
- Completed forebaffle on/off measurements with Rx1
- 3 sets of on/off with all 4 heights
- 3 sets again with an extra Ade filter (8.5 icm) in place
- 3 sets of partial loadcurves with the fb on/off
keckdaq Run 6 (Rx0, Rx1, Rx2, Rx3, Rx4; Dec 27 2012 - Nov 17 2013)
LINKS:
keckdaq Run 9 |
keckdaq Run 8 |
keckdaq Run 7 |
keckdaq Run 5 |
keckdaq Run 4 |
keckdaq Run 3 |
keckdaq Run 2 |
keckdaq Run 1 |
keckdaq Run 0 |
mapodaq (summer lab tests)
-
131117 20:27:11 End of Post-2013 Winter Calibrations
- Brought FFFlat down, started pulling receivers
-
- starting final series (e, DK=166, Rx4)
- 131116 11:53:18 Starting schedule: 7_ffflat_rps_keck_01e_005.sch
- 131117 10:39:12 Exiting schedule: 7_ffflat_rps_keck_01e_005.sch
- last repeat: 131117 10:39:12 Starting schedule: 7_ffflat_rps_keck_01b_001c.sch -- This schedule repeats (b, DK=-50, Rx1) starting from 13th stripe, el=1.6
- 131117 20:27:11 Exiting schedule: 7_ffflat_rps_keck_01b_001c.sch
- done with RPS
-
- 131116 06:55:26 Starting schedule: /home/keck/sch/fridgecycle.sch
- 131116 11:49:36 Starting schedule: /home/keck/sch/mce_autotune.sch
-
- 131116 02:31:29 Starting schedule: 7_ffflat_rps_keck_01c_001b.sch
- this schedule pics up the schedule aborted due to satcom testing
- starting from 18th stripe, el=5.6
- 131116 06:55:26 Exiting schedule: 7_ffflat_rps_keck_01c_001b.sch
- Now completed a,d,c (DK=-122,94,22 / Rx0,3,2) and most of b
- starting fridge cycle now
-
- Interactive testing while GOES transmitter running
- with 1.1 Hz 100% AM square wave, 130 W peak (about the usual power)
- Easily found signal in many timestreams when Keck pointed to AZ near RF facility
- Did five pointings of 9m antenna around direction of GOES;
- Search log file for eg, "9m antenna pointing is az=258.01 el=2.0"
- Executed "scan az-2p8-1p4a, nreps=2" at each pointing
- At final 9m fixed pointing, executed a more extensive Keck 2D raster:
- 131116 01:18:12 Starting schedule: 5_ffflat_satcom_keck01_001.sch
- 131116 02:01:42 Exiting schedule: 5_ffflat_satcom_keck01_001.sch
-
- 131115 02:50:36 Starting schedule: 7_ffflat_rps_keck_01a_003c.sch
- this schedule repeats (a DK=-122 Rx0) last two stripes (el=7.2, 8.0)
- 131115 05:06:08 Exiting schedule: 7_ffflat_rps_keck_01a_003c.sch
- starting c series (Rx2, supposed to be DK=22 but by typo DK=-22, should be OK)
- 131115 05:06:08 Starting schedule: 7_ffflat_rps_keck_01c_001.sch
- 131115 23:54:42 aborted schedule for upcoming satcom testing
-
- 131114 18:36:09 Starting schedule: /home/keck/sch/fridgecycle.sch
- fridge cycle botched by autoqueue starting next sch, so recycle:
- 131114 21:25:57 Starting schedule: /home/keck/sch/fridgecycle.sch
- 131115 02:46:56 Starting schedule: /home/keck/sch/mce_autotune.sch
-
- 131113 05:00:00 Starting schedule: 7_ffflat_rps_keck_01d_003b.sch
- resumed at step 8 (el offset=-1.6)
- tiltmeter=-0.150V
- attens #2=4.50, #3=3.80 (factor of 2 power reduction)
- other settings as before
- 131113 19:06:18 Exiting schedule: 7_ffflat_rps_keck_01d_003b.sch
- Completed a,d (DK=-122,94 / Rx0,3); now starting b (DK=-50,rx1)
- 131113 19:06:19 Starting schedule: 7_ffflat_rps_keck_01b_001.sch
- 131114 08:23:15 Exiting schedule: 7_ffflat_rps_keck_01b_001.sch
- exited prematurely on 13th stripe,
- ...when RPS Windoze laptop rebooted on default 3am auto-update!
- Re-started laptop and RPS communication, and resumed at 13th stripe:
- 131114 09:53:48 Starting schedule: 7_ffflat_rps_keck_01b_001b.sch
- 131114 18:36:09 Exiting schedule: 7_ffflat_rps_keck_01b_001b.sch
- completed schedule but some Rx were warming; starting fridgecycle
-
- 131112 23:12:18 Starting schedule: /home/keck/sch/fridgecycle.sch
- 131113 04:56:21 Starting schedule: /home/keck/sch/mce_autotune.sch
-
- source changed to lower gain rect horn (<1 deg collimation error)
- attens #2=4.00, #3=3.80
- tiltmeter=-0.135V
- other settings same as before
- 131111 10:01:44 Starting schedule: 7_ffflat_rps_keck_01a_003.sch
- schedule died when keck32:/data filled up (2nd time in last week!)
- caught it within 1 hour and restarted at last complete elevation
- 131112 01:11:15 Starting schedule: 7_ffflat_rps_keck_01a_003b.sch
- 131112 12:02:55 Exiting schedule: 7_ffflat_rps_keck_01a_003b.sch
- 131112 12:02:56 Starting schedule: 7_ffflat_rps_keck_01d_003.sch
- 131112 22:22:54 Exiting schedule: 7_ffflat_rps_keck_01d_003.sch
- 131112 22:22:54 aborted at el offset = -0.8 deg
- several Rx were starting to warm...
-
-
- see source logbook for details on Nov 2013 RPS preparation
- chop freq set to 18 Hz
- 150 GHz Source#1, attens #2=5.00, #3=3.80
- tiltmeter=-0.150V (exact zero), tilt temp=-0.184V(=-18.4C)
- source azimuthal alignment estimated to be 7 deg off
- (poor, but better than marks on source box which are 10 deg off!)
- source temperature PID set to 278K
- 131110 13:30:16 Starting schedule: rps_rotate.sch
- 131110 13:41:54 Exiting schedule: rps_rotate.sch
- 131110 13:41:54 Starting schedule: 7_ffflat_rps_keck_01a_002.sch
- 131110 15:25:06 Exiting schedule: 7_ffflat_rps_keck_01a_002.sch
-
- cycleFridge enable=2, on all rx
-
- 131108 08:45:58 Starting schedule: 7_ffflat_moon_keck_01_002.sch
- 131108 12:03:58 Exiting schedule: 7_ffflat_moon_keck_01_002.sch
- DK angle 22
- Moon at EL~14.5, weather: low blowing snow
- 131108 20:21:55 Starting schedule: 7_ffflat_moon_keck_01_003.sch
- 131109 03:00:38 Exiting schedule: 7_ffflat_moon_keck_01_003.sch
- DK angles 94, 166
- 131109 08:13:58 Starting schedule: 7_ffflat_moon_keck_01_004.sch
- 131109 18:05:59 Exiting schedule: 7_ffflat_moon_keck_01_004.sch
- DK angles -194, -122, -50
-
- 7_ffflat_moon_keck_01_001.sch
- DK angles -194, -122, -50
- Moon was at EL∼17… setting to EL∼15
- weather variable, but set up interactively during poor visibility and
- saw the moon clearly in Rx0 detectors, well centered.
-
- cycleFridge enable=2, on all rx
-
- 131106 08:36:59 Starting schedule: 7_dkrot_10_003.sch
- 131106 19:45:49 Exiting sche dule: 7_dkrot_10_003.sch
- Aborted to begin prep for erecting FFFlat
- 131106 19:46:17 Starting schedule: /home/keck/sch/runend.sch
- weather: clear to light cloud
-
- from 00:00 - 03:00 we did interactive testing on Rx1, Rx0
- FB4 is full height (29in), FB3=21in, FB2=14in, FB1=7.25in
- Also used a puck of 5in window-grade HD30 (G7#4)
- Ran test schedule on Rx0
- 131106 03:13:10 Starting schedule: 1_forebaffle_on_off_4_001.sch
- 131106 04:17:21 Exiting schedule: 1_forebaffle_on_off_4_001.sch
- Ran test schedule on Rx1…Rx4
- 131106 04:23:19 Starting schedule: 1_forebaffle_on_off_4_002.sch
- 131106 06:29:33 Exiting schedule: 1_forebaffle_on_off_4_002.sch
- weather: mostly clear, some light cloud
-
- cycleFridge enable=2, on all rx
-
- First we ran a repeat of the previous style schedule:
- 131105 07:02:24 Starting schedule: 7_dkrot_09_014.sch
- 131105 07:30:02 Exiting schedule: 7_dkrot_09_014.sch
- Then a sequence of elnods at 12 DK angles (30 deg steps), and repeat coming back
- 131105 07:31:23 Starting schedule: 7_dkrot_10_001.sch
- 131105 08:16:22 Exiting schedule: 7_dkrot_10_001.sch
- Next, repeat this sequence for the rest of the night
- 131105 08:16:22 Starting schedule: 7_dkrot_10_002.sch
- 131105 16:29:19 Exiting schedule: 7_dkrot_10_002.sch
- 131105 16:29:30 abort_schedule (aborted for fridge cycle)
- /home/keck/sch/runend.sch
- weather: mostly clear, scattered clouds--expect some variability
- window and baffles: clear
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_119.sch
- 131104 04:23:46 abort_schedule
- keck36 masd3 unresponsive, keck36 couldn't be accessed via console or remote
- restarted keck36 and masd
- 131104 04:29:03 schedule /home/keck/sch/mce_autotune.sch
- 131105 06:56:11 aborted schedule: 9_kCMB_46_119.sch
- aborted schedule to run elnod-dkrot schedules
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4
- summer crew arrived
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_118.sch
- 131103 05:01:28 abort_schedule
- 05:04:28 Starting schedule: /data/keckdaq/autoqueue/pending/8_keck_az360_01_000.sch
- restarted run 9_kCMB_46_118.sch
- 131102 04:45:41 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_118.sch
- /home/keck/sch/runend.sch
- weather: clear, some ground fog, bit of blowing snow
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_117.sch
- /home/keck/sch/runend.sch
- weather: bit hazy, clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- installed eccosorb 74 in rx1 (B) around the baffle wall
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_116.sch
- /home/keck/sch/runend.sch
- weather: clear, bit hazy, wind picking up
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- installed eccosorb 74 in rx3 (D) around the baffle wall
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_115.sch
- missed the first scan cycle by 2min, due to computer problems
- masd4 stopped working, after restarting masd4 and keck37 it came back
- /home/keck/sch/runend.sch
- weather: clear, windy, wind dying down
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- more computer problems, mediator stopped, pmac wasn't updating
- also spudws1 went nuts, found a dead fan, replaced it
- both issues are not related but a bit odd
- after all the problems, restarted keck31, keck32, syncbox, gcp and masd
- recharged comp 4, He loss increasing significantly over the past days
-
- changed schedlib back to normal version
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_114.sch
- 9_kCMB_46_114.sch changed to dk=113 to compare with previous run
- /home/keck/sch/runend.sch
- weather: clear, windy
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- PMAC wasn't updating, restarted keck31, gcp, masd
- sync box error, reset syncbox
- keck35 unresponsive
- restarted a singel fridge cycle
- recharged comp 4
-
- window and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_096.sch
- az diff jump to 60k, would be still good, but since you cutting so conservative, reset and
- homed telescope
- did GOES test, after GOES pass ended all logbook entries start with "GOES test"
- /home/keck/sch/runend.sch
- weather:
- window and baffles:
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_095.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up a bit
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- /home/keck/sch/starpoint_pole_manu_summer.sch
- pmac stopped because of limit switch error, could not reproduce
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_094.sch
- /home/keck/sch/runend.sch
- weather: overcasted, warm, clearing, clear, cooling down
- window and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_093.sch
- /home/keck/sch/runend.sch
- keck32 disk filled up, my fault, sorry
- weather: overcasted, very warm, snow fall
- window and baffles: windows very few specks of snow, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 2,5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_092.sch
- /home/keck/sch/runend.sch
- weather: clear, high winds, overcasted for the last 2/3 of the run, very warm
- window and baffles: windows clear, little bit of snow in the baffle
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_091.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, blowing snow
- window and baffles: windows clear, baffles top rim a bit frosted over
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_090.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, some blowing snow
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_089.sch
- /home/keck/sch/runend.sch
- weather: some high clouds, clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_088.sch
- /home/keck/sch/runend.sch
- weather: clear, some high clouds
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_087.sch
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_086.sch
- all seems good after the power outage
- /home/keck/sch/runend.sch
- weather: clearing, high clouds, clear towards the end
- window and baffles: windows clear, quite some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_085.sch
- about 130829 0850 3h power outage
- recovering, I think 1h after power is restored got everything running
- but will need to do a fridgecycle
- weather: overcasted
- window and baffles:
-
- cycleFridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_084.sch
- /home/keck/sch/runend.sch
- weather: overcasted
- window and baffles: windows clear, snow in and on baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_083.sch
- /home/keck/sch/runend.sch
- weather: clear, totally overcast towards the end
- window and baffles: windows clear, very little snow dust on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_082.sch
- /home/keck/sch/runend.sch
- weather: clear and overcasted periods, low winds
- window and baffles: windows clear, quite some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_081.sch
- /home/keck/sch/runend.sch
- weather: clear to overcast, wind picking up
- window and baffles: windows clear, some snow in and on baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
- /home/keck/sch/starpoint_pole_manu_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_080.sch
- /home/keck/sch/runend.sch
- weather: clear, finally cold again
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 1, 5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_079.sch
- /home/keck/sch/runend.sch
- weather: wind picking up, a bit hazy
- window and baffles: windows clear, a little snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_078.sch
- /home/keck/sch/runend.sch
- weather: mostly clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- spudws1 froze, restarted gcp and masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_077.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, winds up to 24kts
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_076.sch
- /home/keck/sch/runend.sch
- weather: high winds, mostly clear overhead, some haze
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_075.sch
- /home/keck/sch/runend.sch
- weather: high winds, blowing snow
- window and baffles: windows clear, part of inside baffle coated with fine snow
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_074.sch
- /home/keck/sch/runend.sch
- weather: clear periods with high winds and overcasted skies
- window and baffles: windows clear, baffles partly dusted over with snow
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_073.sch
- pmac stopped just after the 3rd scanset around 1400UTC
- /home/keck/sch/runend.sch
- weather: high wind, clearing towards the end, winds still high
- window and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_072.sch
- /home/keck/sch/runend.sch
- weather: storm, blowing snow, very high winds, 45kts, some clear sky overhead
- window and baffles: windows clear, lots of snow in and on baffle
-
- cycleFridge enable=2, on all rx
- recharged comp 5
- changed 1 of 3 failed power supplies in omega0 for spare
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_071.sch
- /home/keck/sch/runend.sch
- weather: clear overhead, getting hazy, wind picking up, blowing snow, no stars visible
- window and baffles: rim of windows very little ice, quite a bit of snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_070.sch
- /home/keck/sch/runend.sch
- weather: clear to hazy, wind picking up, storm, clear overhead
- window and baffles: windows clear, some snow in and on the baffle
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_069.sch
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles:
-
- cycleFridge enable=2, on all rx
- /home/keck/sch/starpoint_pole_manu_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_068.sch
- keck36 didn't come up, unresponsive via terminal and console, rebooted keck36
- 130726 11:06:46 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130726 11:10:23 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_068.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, some thin clouds
- window and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_067.sch
- /home/keck/sch/runend.sch
- weather:claering, some gusts but mainly clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_066.sch
- /home/keck/sch/runend.sch
- weather: wind dying down, claering a bit, weather improving, but still a bit hazy
- window and baffles:windows clear, very little snow in the baffle
-
- cycleFridge enable=2, on all rx
- recharged comp 5
-
- pmac stopped just before runstart
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_065.sch
- /home/keck/sch/runend.sch
- weather: overcasted, storm, blowing snow
- window and baffles: very little snow on windows, tons of snow in the baffle
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_064.sch
- /home/keck/sch/runend.sch
- weather: clear, getting hazy, wind is picking up
- window and baffles: windows clear, some snow in and on baffles
-
- spudws 1 froze, after restarting gcp, problems with antenna computer
- cycleFridge enable=2, on all rx
- rebooted antenna and keck32
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_063.sch
- /home/keck/sch/runend.sch
- weather: clear, slight haze
- window and baffles:windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_062.sch
- pmac stopped after skydip
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
-
- keck33 was rebooted
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_061.sch
- /home/keck/sch/runend.sch
- weather: beautiful, clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_060.sch
- /home/keck/sch/runend.sch
- weather: clear, getting hazy, clearing again
- window and baffles: windows clear, very little snow on the baffles
-
- replace C low az wrap line with a spare
- cycleFridge enable=2, on all rx
- recharged comp 1,2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_059.sch
- /home/keck/sch/runend.sch
- weather: overcasted, windy, clearing
- window and baffles: windows clear, barely any snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_058.sch
- /home/keck/sch/runend.sch
- weather: hazy, clear, total overcasted, wind picking up
- window and baffles: windows clear, lots of snow in and on baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_057.sch
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, hazy
- window and baffles: windows clear, lots of snow in and on baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 1
- cycled sync box
- restarted gcp and masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_056.sch
- /home/keck/sch/runend.sch
- weather: clear, total overcasted at the end, wind picking up
- window and baffles: windows clear, lot of snow in and on baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4, 5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_055.sch
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: windows clear, some snow on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_054.sch
- /home/keck/sch/runend.sch
- weather: hazy to totally clear
- window and baffles: windows clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
- A1 readhead roller ceased up
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_053.sch
- /home/keck/sch/runend.sch
- weather: quite hazy, clear, overcast
- window and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 1,2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_052.sch
- keck 33 was down??, not responsive via terminal or console, rebooted keck33
- 130624 13:16:35 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130624 13:20:14 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_052.sch
- /home/keck/sch/runend.sch
- weather: partly overcasted, clearing, clear, tiny bit of haze
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_051.sch
- /home/keck/sch/runend.sch
- weather: hazy, wind picking up again, partly overcasted
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- 130622 11:49:06 Starting schedule: /home/keck/sch/starpoint_pole_manu_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_050.sch
- /home/keck/sch/runend.sch
- weather: overcast, blowing snow, clearing, just a bit hazy
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_049.sch
- /home/keck/sch/runend.sch
- weather: wind picking up again, storm, overcast
- window and baffles: windows clear, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 2,4
- 130618 12:20:05 Starting schedule: /home/keck/sch/starpoint_pole_manu_winter.sch
- 30618 12:28:34 abort_schedule
- sky conditions getting worse again
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_048.sch
- sometimes around 130617 12:00 lost furnace in MAPO, holding up good
- /home/keck/sch/runend.sch
- weather: overcast, storm, easing towards the end, blowing snow
- window and baffles: windows clear, a bit snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_047.sch
- /home/keck/sch/runend.sch
- weather: hazy start, but clearing, hazy, total overcast
- window and baffles:windows clear, some snow in and on baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_046.sch
- /home/keck/sch/runend.sch
- weather: blowing snow hazy, clearing, wind picking up again, blowing snow, a bit hazy
- window and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_045.sch
- 130611 00:02:37 suspend_schedule
- freak az diff jump, rehomed
- data are good until jump and after rehoming, i.e. resume schedule
- 130611 00:08:59 resume_schedule
- /home/keck/sch/runend.sch
- weather: blowing snow, mostly clear overhead, hazy periods
- window and baffles: windows clear, a little bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_044.sch
- /home/keck/sch/runend.sch
- weather: clear, wind picking up, slightly hazy, blowing snow
- window and baffles: windows clear, some snow in baffle
-
- cycleFridge enable=2, on all rx
- recharged comp 1,2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_043.sch
- pmac stopped after first scanset around 130606 16:17
- problems with downsample and graphs
- 130607 20:26:56 suspend_schedule, stopped schedule shortly after
- powercycled sync box and mce power, restarted gcp and masd
- 130607 20:33:28 schedule /home/keck/sch/mce_autotune.sch
- still the same
- restarted keck 33-37 and antenna
- just having gcp running looks good
- 130607 21:47:12 schedule /home/keck/sch/mce_autotune.sch
- 130607 21:50:51 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_043a.sch
- gcp won't update
- restarted gcp and masd
- 130607 21:53:47 Starting schedule: /home/keck/sch/mce_autotune.sch
- problems continue, lot's of trouble shooting
- around 130608 20:15 got it working again
- weather: clear, very cold, longest stretch of below -100F ever
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_042.sch
- /home/keck/sch/runend.sch
- weather: mostly clear, cold
- window and baffles: windows clear, very little snow on the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_041.sch
- /home/keck/sch/runend.sch
- weather: overcast to clear
- window and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_040.sch
- /home/keck/sch/runend.sch
- weather: hazy to clear, end of run, totally overcast, warm, windy, no stars visible
- window and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- did some work on baffles, black lining was coming off on two baffles
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_039.sch
- /home/keck/sch/runend.sch
- weather: clear, hazy mostly clear overhead, hazy
- window and baffles: window clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 1,2,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_038.sch
- 130529 07:55:38 suspend_schedule, announced power outage
- 130529 08:16:10 resume_schedule, no power outage, power plant coulde recover
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_037.sch
- 24V power supply died during run
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_036.sch
- /home/keck/sch/runend.sch
- weather: clear with hazy periods
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_035.sch
- fire alarm in Bldg 61, power outage about 130522 23:30
- massive radio chatter in MAPO started at about 130522 22:40
- 130522 23:46:15 abort_schedule
- 130523 00:40:00 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130523 00:43:38 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_035a.sch
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: windows clear, traces of snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
- pmac stopped
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_034.sch
- /home/keck/sch/runend.sch
- limit switches are holding
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_033.sch
- same limit switch broke again
- 130518 17:07:50 suspend_schedule
- adjusted limit switch activator plate
- 130518 17:32:01 resume_schedule
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_032.sch
- /home/keck/sch/runend.sch
- limit switch broke
- weather: hazy - totally clear - overcast -clearing
- window and baffles: windows clear, barely any snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- data/keckdaq/autoqueue/pending/9_kCMB_46_031.sch
- /home/keck/sch/runend.sch
- weather: bit hazy - clear - bit hazy wind picking up, blowing snow
- window and baffles: windows clear, baffles had some snow
-
- cycleFridge enable=2, on all rx
- replaced readhead 2A
-
- /home/keck/sch/mce_autotune.sch
- data/keckdaq/autoqueue/pending/9_kCMB_46_030.sch
- pmac stopped right after skydip
- /home/keck/sch/runend.sch
- weather: clear - hazy, not too bad overhead
- window and baffles:windows clear, baffles some snow
-
- cycleFridge enable=2, on all rx
- /home/keck/sch/starpoint_pole_manu_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_029.sch
- az diff jump HUGE ate 130510 right at midnight, (readhead 2)
- 130511 01:35:26 abort_schedule
- rehomed
- 130511 01:36:10 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_029.sch
- no more problems with az diff
- /home/keck/sch/runend.sch
- weather: clearing - perfect sky conditions
- window and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_028.sch
- /home/keck/sch/runend.sch
- weather: hazy - clearing overhead
- window and baffles: windows clear, baffles very little snow
-
- spudws1 forze, restarted gcp and masd
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_027.sch
- /home/keck/sch/runend.sch
- weather: hazy, ice fog
- window and baffles: little snow on windows, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_026.sch
- /home/keck/sch/runend.sch
- weather: clear ,brief haze, cold below -100F
- window and baffles: windows clear, baffles little snow
-
- cycleFridge enable=2, on all rx
- recharged comp 4,5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_025.sch
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_024.sch
- pmac stopped on 3rd scanset about 19:50
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_023.sch
- az diff was shifting during star poninting, had to do some testing, missed one scanset
- /home/keck/sch/runend.sch
- weather: clear - hazy - scattered clouds
- window and baffles: little snow in the windows, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
- reduced pressure in comp3 by 5psi to 266psi
- /home/keck/sch/starpoint_pole_manu_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_003.sch
- 130425 20:27:03 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_022.sch
- power outage around 130427 03:40, only pmac/telscope stopped, all other systems good
- 2nd power outage around 130427 03:50, no more connection to MAPO but otherwise same as above
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_021.sch
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_020.sch
- /home/keck/sch/runend.sch
- weather: clear, beautiful
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_019.sch
- /home/keck/sch/runend.sch
- weather: clear and nice - finally
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_018.sch
- /home/keck/sch/runend.sch
- weather: stormy, wind dying down towards the end, clear
- window and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
- reduced pressure in comp 3 by 5psi to 272psi
-
- /home/keck/sch/mce_autotune.sch
- still problems with mce4, reboot keck37
- 130415 17:59:06 Starting schedule: /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_017.sch
- /home/keck/sch/runend.sch
- weather: clear at the beginning, back to storm and blowing snow again
- window and baffles: windows clear, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_016.sch
- rx4 mce problems during the run
- /home/keck/sch/runend.sch
- weather: stormy, wind dying towards end, clearing
- window and baffles: windows clear, a bit of snow in baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 2,4,5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_015.sch
- /home/keck/sch/runend.sch
- weather: stormy, blowing snow, overhead ok
- window and baffles: windows clear, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_014.sch
- /home/keck/sch/runend.sch
- weather: storm, clearing over head, high winds, blowing snow
- window and baffles: windows clear, baffles a bit of snow
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_013.sch
- 130408 16:05:00 suspend_schedule
- broken limit switch, replaced lever and switch
- 130408 17:04:06 resume_schedule
- didn't resume so restarted the schedule
- 130408 17:55:35 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_013.sch
- pmac stopped again
- /home/keck/sch/runend.sch
- weather: storm, high winds snow
- window and baffles: windows clear, some snow in baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_012.sch
- pmac stopped after 2nd scanset
- /home/keck/sch/runend.sch
- weather: clear to scattered clouds
- window and baffles: windows clear, quite a bit of snow in the baffles, baffle heaters tripped
-
- cycleFridge enable=2, on all rx
- recharged comp 2
- /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_011.sch
- pmac stopped at runstart
- /home/keck/sch/runend.sch
- weather: hazy to clear
- window and baffles: windows clear, some snow in baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
- 130403 17:24:10 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
- 130403 17:28:46 abort_schedule, clouded over
-
- problems with MCE, missing files prevented mce_autotune to finish
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_002.sch
- 13:20:38 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_010.sch
- /home/keck/sch/runend.sch
- weather: clear, very cold, scattered clouds warming up again
- window and baffles: windows clear, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
- changed Winston cones back to black fore baffles - no fun at -71C !!
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_009.sch
- run quite right away, restarted masd, now it worked ?
- 130330 19:01:34 schedule /home/keck/sch/mce_autotune.sch
- 130330 19:05:14 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_009.sch
- /home/keck/sch/runend.sch
- weather: clear, temperatures dropping, very cold
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_008.sch
- /home/keck/sch/runend.sch
- weather: overcast, snowfall, small bits of clear sky
- window and baffles:all windows had a 4in round snowpatch in the middle, barley any snow in the baffles
-
- cycleFridge enable=2, on all rx
- problems with rx0 was still disabled to take commands, so fridgecycle didn't start
- adjusted osborne rollers
- some problems with keck31 pmac wouldn't update
-
- /home/keck/sch/mce_autotune.sch
- data/keckdaq/autoqueue/pending/9_kCMB_46_007.sch
- 130326 20:14:33 abort_schedule
- rx0 taken offline, rx0 testing
- 130326 20:34:48 schedule /data/keckdaq/autoqueue/pending/9_kCMB_46_007.sch
- reduced pressure in comp3 (rx0) from 285 to 280psi
- /home/keck/sch/runend0.sch
- weather: overcasted, snow, warm
- window and baffles: windows clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4, 5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_006.sch
- /home/keck/sch/runend.sch
- weather: clear and very cold, to overcast, slight snowfall
- window and baffles: all windows had very little snow, baffles had a little snow
-
- cycleFridge enable=2, on all rx
- removed 11psi to comp 3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_001.sch
- 130322 23:07:11 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_005.sch
- 130323 03:03:42 abort_schedule
- knoise wasn't running properly
- 130323 03:03:42 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130323 03:07:20 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_001.sch
- 130323 06:30:55 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130323 06:34:33 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_005a.sch
- /home/keck/sch/runend.sch
- weather: overcasted with clear skies
- window and baffles:very little snow on the windows with Winston cones, other windows are ok, baffles had very little snow in them
-
- cycleFridge enable=2, on all rx
- added 5psi to comp 3
-
- schedlib change
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_9_000.sch
- pmac stopped ?
- 130321 20:13:30 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130322 00:22:22 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_004.sch
- 130322 13:47:02 abort_schedule
- changed rx2 and rx3 forebaffles to Winston cones
- weather: overcasted, light snowfall
- window and baffles: windows clear, some snow in baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4
- changed rx0 mce address card with spare
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_003.sch
- 130320 16:38:20 abort_schedule
- new schedlib
- 130320 18:07:56 schedule /home/keck/sch/mce_autotune.sch
- 130320 18:11:34 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_003.sch
- /home/keck/sch/runend.sch
- weather: clear to overcasted
- window and baffles: some snow on windows, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_002.sch
- 130317 21:32:37
- tuning issue rx0
- 130317 21:54:46 schedule /home/keck/sch/mce_autotune.sch
- 130317 22:10:50 schedule /data/keckdaq/autoqueue/pending/9_kCMB_46_002.sch
- /home/keck/sch/runend.sch
- weather: clear with overcast periods, some snow
- window and baffles: little snow on the windows, quite a bit in the baffles
- rebooted keck31, restarted gcp and masd
-
- cycleFridge enable=2, on all rx
- recharged comp 2,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_001.sch
- 130316 06:09:11 abort_schedule
- problems with gcp
- 130316 07:19:39 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130316 07:26:14 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_46_001a.sch
- 130316 13:16:50 abort_schedule
- abort for fridgecycle
- problems with gcp and keck31, raid on keck31 needs rebuild
- keck31 out of disk space
- weather: overcasted with some blowing snow, clear periods
- windows and baffles: windows clear, some snow in baffles
-
- cycleFridge enable=2, on all rx
- 130314 18:30:40 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_46_000.sch
- /home/keck/sch/runend.sch
- weather: overcasted, bit of blowing snow to clear
- window and baffles: windows clear, quite a bit of snoe in the baffles
-
- cycleFridge enable=3, on all rx
- recharged comp 4
- spudws1 froze, restarted gcp and masd
-
- all 5 black baffles and cozies are on
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_022.sch
- 130312 07:09:51 schedule /home/keck/sch/mce_autotune.sch
- 130312 07:13:23 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_022b.sc
-
- changed back to new schedlib.sch
- 130311 14:45:25 schedule /home/keck/sch/schedlib.sch
- cycleFridge enable=2, on all rx
-
- reverting to previous schedlib.sch
- cycleFridge enable=2, on all rx
- cool down works again
-
- cycleFridge enable=2, on all rx
- not all rx cool down properly
-
- cycleFridge enable=4, on all rx
- not all rx cool down properly
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_Al_0_001.sch
- 130308 06:01:51 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130308 06:17:17 Starting schedule: /data/keckdaq/autoqueue/pending/6_ffflat_dslmast_31j_005.sch
- 130308 13:57:57 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130308 14:01:30 Starting schedule: /data/keckdaq/autoqueue/pending/6_ffflat_dslmast_31f_006.sch
- 130308 19:33:30 abort_schedule
- 130308 19:49:58 Starting schedule: /home/keck/sch/mce_autotune.sc
- 130308 19:53:32 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_Al_0_002.sch
- 130308 20:15:02 abort_schedule
- gcp froze, restarted gcp and masd
- 130308 20:18:21 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_responsivity_Al_0_002.sch
- took BAM down
-
- recharged all compressors to 290 psi, comp 4(rx3) to 296 psi
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 130306 09:50:50 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_004.sch
- 130306 17:31:21 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31f_004.sch
- 130306 21:50:03 abort_schedule
- problems with rx0 tuning
- 130306 21:53:08 rx0 mce testing
- 130306 21:57:31 rx0 mce testing - power cycle sync box
- 130306 21:59:14 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130306 22:03:32 rx0 mce testing - power cycle mces sync box
- 130306 22:17:15 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130306 22:21:44 rx0 mce testing - power cycle mces sync box, reseating cable
- 130306 22:27:08 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130306 22:32:19 syncBox data_rate=140, num_rows=33, row_len=30, enable=on
- 130306 22:32:36 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130306 23:18:39 rx0 mce testing - reset MCE computers and keck31
- 130306 23:38:11 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130306 23:52:23 rx0 mce testing - swapping mce power cable rx0 - rx1
- 130307 00:09:21 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130307 00:12:54 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31f_005.sch
- 130307 01:07:56 abort_schedule
- 130307 02:18:36 rx0 mce testing - restarted sync box and mce power
- 130307 02:19:54 Starting schedule: /home/keck/sch/mce_autotune.sch
- bad tuning
- 130307 02:27:03 rx0 mce testing - rebooting keck33
- 130307 02:49:30 Starting schedule: /home/keck/sch/mce_autotune.sch
- auto_setup on keck33
- bad tuning
- changed sq1_servo_bias_ramp from 0 to 1 in experiment.cfg
- auto_setup on keck33
- 130307 03:34:49 Starting schedule: /home/keck/sch/mce_autotune.sch
- bad tuning
- Sarah tried various above, bad tuning
- powercycled sync box and mce power, reseated mce connectors
- good tuning
- 130307 06:35:35 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130307 06:39:49 Starting schedule: /data/keckdaq/autoqueue/pending/6_ffflat_dslmast_31a_005.sch
- 130307 14:19:24 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31f_005.sch
- rx0 warmed up about 2h before the runend
- 130307 21:59:04 Starting schedule: /home/keck/sch/runend0.sch
- changed to new schedlib
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- <130304 19:36:32 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_003.sch/li>
- 130304 22:50:18 abort_schedule
- problems with rx0 tuning, turned mce power off, checked connectors, powered mce up
- power cycled sync box, restarted masd
- 130305 10:59:31 schedule /home/keck/sch/mce_autotune.sch
- 130305 11:03:03 Starting schedule: /data/keckdaq/autoqueue/pending/6_ffflat_dslmast_31i_004.sch
- aborted schedule, problems with run, gcp, sync box etc.
- rebooted keck33-37 and antenna, power cycled syncbox
- 130305 12:22:18 schedule /home/keck/sch/mce_autotune.sch
- 130305 12:25:52 Starting schedule: /data/keckdaq/autoqueue/pending/6_ffflat_dslmast_31i_004.sch
- 130305 20:05:10 Starting schedule: /data/keckdaq/autoqueue/pending/6_ffflat_dslmast_31j_004.sch
- 130306 03:58:37 schedule /home/keck/sch/runend.sch
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 130303 04:21:07 Starting schedule: /data/keckdaq/autoqueue/pending/6_ffflat_dslmast_31f_003.sch
- 130303 12:00:52 Starting schedule: /data/keckdaq/autoqueue/pending/6_ffflat_dslmast_31h_003.sch
- 130303 19:41:49 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31b_003.sch
- 130304 03:24:53 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_003.sch
- rx0 warmed up a bit before the end of the last schedule
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 130301 14:24:59 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_003.sch
- 130301 22:04:39 Starting schedule: /data/keckdaq/autoqueue/pending/6_ffflat_dslmast_31d_003.sch
- 130302 05:45:49 Starting schedule: /data/keckdaq/autoqueue/pending/6_ffflat_dslmast_31i_003.sch
- 130302 13:26:09 Starting schedule: /data/keckdaq/autoqueue/pending/6_ffflat_dslmast_31j_003.sch
-
- cycleFridge enable=2, on all rx
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 130227 03:41:01 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31b_001.sch
- 130227 11:20:45 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_002.sch
- 130227 19:00:53 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31f_002.sch
- 130228 02:41:11 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_002.sch
- 130228 08:31:14 abort_schedule
- rx0 wasn't recording
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 130225 13:32:29 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_001.sch
- 130225 21:11:53 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_001.sch
- rehomed
- 130226 05:00:16 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31g_001.sch
- 130226 12:40:01 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31c_001.sch
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 130224 00:39:52 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31d_001.sch
- 130224 02:30:26 abort_schedule
- keck 33 is unresponsive, rebooted
- 130224 03:07:40 schedule /home/keck/sch/mce_autotune.sch
- 130224 03:11:14 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31d_001.sch
- 130224 10:50:32 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_001.sch
- 130224 18:30:45 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31h_001.sch
- 130225 02:11:32 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_001.sch
- 130225 08:08:36 abort_schedule
- fridges started to run out
- 130225 08:08:36 Starting schedule: /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 130222 09:30:39 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28a_007.sch
- 130222 17:10:51 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28b_007.sch
- 130223 03:24:50 abort_schedule
- 130223 03:25:01 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31i_001.sch
- 130223 11:05:48 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31f_001.sch
- 130223 11:13:11 schedule /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
-
- fpu temperatures from rx=1,2,3,4 were already at 350mk after the fridgecycle (Al transition!?)
- 130220 19:28:38 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31i_000.sch
- 130220 21:04:31 abort_schedule
- same problem, gcp froze reverted back to old schedlib (without rx0), seems to work fine
- 130220 21:07:25 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31i_000.sch
- 130221 04:46:49 Starting schedule: /home/keck/sch/mce_autotune.sch
- restarted gcp and masd
- 130221 04:53:04 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31h_000.sch
- 130221 12:32:54 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31e_000.sch
- 130221 20:13:44 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31g_000.sch
- 130222 03:55:18 Starting schedule: /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 130219 12:16:49 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31j_000.sch
- engaged connectors on mce on rx0, all 5rx are running
- 130219 21:21:09 Starting schedule: /home/keck/sch/mce_autotune.sch
- 130219 21:24:43 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31f_000.sch
- 130220 05:05:15 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31i_000.sch
- 130220 12:08:33 abort_schedule
- gcp froze, rx0 wasn't included in the ffflat schedules so far, schedlib.sch was changed before
- 7_ffflat_dslmast_31i_000.sch, restarted masd, gcp, tried again new schedlib.sch
-
- cycleFridge enable=3, on all rx
-
- /data/keckdaq/autoqueue/pending/2_keck_5rx_ICenthalpy.sch
- recharged comp 4 (rx3)
-
- cycleFridge enable=3, on all rx
-
- /data/keckdaq/autoqueue/pending/1_keck_5rx_UCenthalpy.sch
-
- cycleFridge enable=2, on all rx
-
- cycleFridge enable=2, on all rx
-
- 130216 02:45:05 Starting schedule: /home/keck/sch/mce_autotune.sch
- special tunings for Sarah - sq1_bias_ramp_script
- mceGeneric "$GCP_DIR/../masd/bicep/scripts/sq1_bias_ramp_script"
- changed /data/cryo/array_id on Keck37 to keck5_e3
- 130216 02:53:44 Starting schedule: /home/keck/sch/mce_autotune.sch
- changed /data/cryo/array_id on Keck37 to keck5_e4c
- 130216 02:58:13 Starting schedule: /home/keck/sch/mce_autotune.sch
-
- cycleFridge enable=4, on all rx
- rx0 is cold :)))
-
- cycleFridge enable=2, on rx 1,2,3,4
-
- /home/keck/sch/runend0.sch (mce_autotune without rx0)
- 130213 01:39:24 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_30d_000.sch
- 130213 09:19:45 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_30e_000.sch
- 130213 16:59:36 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31a_000.sch
- 130213 20:56:22 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_31b_000.sch
- 130213 22:14:54 abort_schedule
- chopper died, working on it
-
- cycleFridge enable=2, on rx 1,2,3,4
-
- rx0 still on cool down
- starting ffflat schedules
- /home/keck/sch/runend0.sch (mce_autotune without rx0)
- 130212 00:48:09 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_30b_000.sch
- <30212 08:28:18 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_30c_000.sch/li>
-
- 7_sidelobes_mapomast_07_000.sch
- source at maximal attenuation
- dk angles = -230,-158,-86
- black forebaffles on rx3 and rx4
- Winston shields on rx1 and rx2
-
- 7_sidelobes_mapomast_06_000.sch
- source as before
- dk angles = -86 (rx2), -14 (rx1), 58 (rx0,empty), 130 (rx4) was aborted to start mounting rx0
- black forebaffles on rx3 and rx4
- Winston shields on rx1 and rx2
-
- 7_sidelobes_mapomast_05_002.sch
- source as before
- black forebaffles on rx3 and rx4
- Winston shields on rx1 and rx2
- dk angles = -158 (rx3), -134, -110, -86 (rx2)
- elnod at 44 degrees crashed on final elnods (apparently both elnods hit the 43 degree limit). MVL manually (via pmacterm) backed the mount away from limit each time, and thus verified that it was indeed the elnod which caused this. Need to edit script to offset the mount to ~46 degrees before next run.
- IC ran out on Rx3 sometime during elnod halt.
-
- 7_sidelobes_mapomast_05_001.sch
- source as before
- black forebaffles on rx1 and rx2
- Winston shields on rx3 and rx4
- dk angles = -158, -134, -110
-
- 7_sidelobes_mapomast_04_001.sch
- source as before
- forebaffles still off
- dk angles = -134, -110, -86
-
- 7_sidelobes_mapomast_04_000.sch
- source mounted on MAPO mast with full CF extension (total height ~50')
- source is tripler output 140-160 BP filtered, atten=0.0 (full open), vert pol, conical horn, 4 source baffle, 10 Hz chop
- forebaffles off
- schedule typo caused hang-up after first DK angle (dk=-158) completed
-
- 7_noffflat_skynet_03_001.sch
- much better weather this morning
- positioned rx2 at top of drum and saw real-time 3Hz pickup on many of its channels
- rx0 is warm
-
- 7_noffflat_skynet_02_001.sch
- skynet northern portable test antenna is pointed directly at Keck
- they are transmitting 8.15 GHz, 40W, 3Hz chop
- positioned rx0 near top of drum and saw real-time 3Hz pickup on 3 channels only
- weather very poor! probably data unusable…
-
- 9_kCMB_45_065.sch (3rd of that name)
- MARTIN or SARAH: please fill in details!
-
- 7_dkrot_09_010.sch
- MARTIN or SARAH: please fill in details!
- data good?
-
- 9_kCMB_45_065.sch (2nd of that name)
- MARTIN or SARAH: please fill in details!
- aborted to repeat dkrot
-
- 9_kCMB_45_065.sch
- MARTIN or SARAH: please fill in details!
- apparently aborted after 11h and restarted w/ same name (why?)
-
- 7_dkrot_09_009.sch
- MARTIN or SARAH: please fill in details!
- is this data good?
-
- 1_forebaffle_on_off_2_001.sch
- SARAH: please fill in details!
- loading of no FB vs. black FB vs. Winston FB on two rx's
-
- 1_knoise_responsivity_7_023.sch
- MARTIN or SARAH: please fill in details!
- is this data good?
-
- 1_knoise_responsivity_7_022.sch
- MARTIN or SARAH: please fill in details!
- is this data good?
-
- 1_knoise_responsivity_7_021.sch
- MARTIN or SARAH: please fill in details!
- is this data good?
-
- 7_sidelobes_mapomast_03_017.sch
- Identical to 7_sidelobes_mapomast_03_014.sch
- Started after fridge cycle complete so no wait
- Nitrogen flowing through membranes
- Clem poked around the mount before schedule started
-
- 7_sidelobes_mapomast_03_015.sch
- Identical to previous schedule
- Schedule waits 6 hours at start for fridge cycle
- Unexpected exit! Disregard
- Also disregard 7_sidelobes_mapomast_03_016.sch -- attempted to redo schedule but fridges warmed up very early
-
- 7_sidelobes_mapomast_03_014.sch
- Attenuators unchanged (R:5.25 SB: 5)
- Source polarization vertical, forebaffles on
- Peak signal 2000 ADU co-polar (gcp 134)
- Both rx0 and rx2 warmed up, restarting entire schedule
-
- 7_sidelobes_mapomast_03_013.sch
- Repeat dk +166 with Rx0 cold
- Schedule waits 6 hours at start for fridge cycle
- Schedule stopped at el=53; reason not known (no mount problem on PMAC page)
-
- 7_sidelobes_mapomast_03_012.sch
- Rocky = 5.25, Severe Backlash = 5
- Peak signal 1000 ADU in co-polar pixel
- Source horizontal, forebaffles on
- Rx0 warming up during last dk angle (+166)
-
- 7_sidelobes_mapomast_03_011.sch
- Still no Nitrogen for membranes, but they were free of snow
- Redo dk +166 with Rx0 cold
-
- 7_sidelobes_mapomast_03_010.sch
- Source polarization changed to horizontal; attenuator settings unchanged
- Added HR-10 around carbon fiber rod/mast
- Rx0 warming up during last dk angle (+166)
- Membranes ran out of Nitrogen
-
- 7_sidelobes_mapomast_03_009.sch
- Put forebaffles on
- Source polarization (vertical) and attenuator settings (Rocky = Severe Backlash = 0) unchanged
keckdaq Run 5 (Rx0, Rx1, Rx2; Nov 2012 - Dec 27 2012)
LINKS:
keckdaq Run 9 |
keckdaq Run 8 |
keckdaq Run 7 |
keckdaq Run 6 |
keckdaq Run 4 |
keckdaq Run 3 |
keckdaq Run 2 |
keckdaq Run 1 |
keckdaq Run 0 |
mapodaq (summer lab tests)
-
- 7_sidelobes_mapomast_03_008.sch
- 6 hour wait at beginning for fridge cycle
- Rotate source so polarization is vertical; attenuator settings unchanged
-
- 7_sidelobes_mapomast_03_007.sch
- Repeat dk=+166 with Rx1 cold again
- 6 hour wait at beginning for fridge cycle
-
- 7_sidelobes_mapomast_03_006.sch
- Source power increased: changed attenuators to Rocky = 0, Severe Backlash=0. This is the maximum power possible with this source.
- source polarization still horizontal
- Bad Weather: snowing and clouds cover the sky
- Added HR-10 baffling around source to prevent reflections off the mast.
- Rx1 warmed up during the last dk angle (+166)
-
- 7_sidelobes_mapomast_03_005.sch
- Source power increased: changed attenuators to Rocky = 40, Severe Backlash = 0. Peak signal in Rx0 gcp134 (cross-polar) was 4000 ADU
- Blowing Nitrogen through membranes to melt snow
- amplifier bias voltage = 9.96 V.
- source polarization still horizontal
-
- 7_sidelobes_mapomast_03_003.sch
- Source polarization changed to horizontal by rotating source. (We turned off the source and took down the mast to do this.) Source attenuator settings unchanged.
- Peak signal of 3000 ADU on pixel 135 (copolar, gcp numbering Rx0).
-
- 7_sidelobes_mapomast_03_002.sch
- Only dk=+166, with Rx0 cold again. Source settings are unchanged.
-
- 7_sidelobes_mapomast_03_001.sch
- Picking up at dk=+22, where the last schedule was aborted. Source settings are unchanged.
- A couple attempts to run this schedule ran into azimuth problems and were aborted quickly. These failed attempts do not have logbook entries.
- rx0 UC starts to warm up around 121214 22:00:00. IC is still cold, so we might still be getting useful data with detectors on Al transition.
-
- 7_sidelobes_mapomast_03_000.sch
- This schedule started running at 09:59:03, but it includes a long wait at the start to make sure that the fridge cycle complete. The time listed above is when the wait completed.
- Broadband noise source mounted on MAPO mast with carbon fiber rod extension. Mast height is 482″ plus 12.5″ for the clamping fixture plus 96″ for the rod itself.
- Source attenuator settings are: Rocky = 50, Severe backlash = 50.
- Schedule performs 380° az scans at elevations from 78° down to 44°, in 0.5° steps. This pattern repeats at dk angles -122, -50, +22, +94, and +166.
- Schedule was aborted due to azimuth following error in the deck= +22 portion. Only decks -122 and -50 completed.
- Checked peak signal on pixel 134 (Rx0 gcp number), found ~4000 ADU (this pixel is co-polar)
- Source polarization is vertical
- 18 Hz source modulation in antenna0.pmac.fast_aux_input[0]
- Forebaffles off for these schedules
-
-
-
- 7_ptonoff_01_005.sch
- Pulse tube off between 03:53:17 and 04:02:01
-
- 7_ptonoff_01_005.sch
- Pulse tube off between 02:35:15 and 02:36:27
-
- 7_ptonoff_01_005.sch
- Pulse tube off between 01:16:54 and 01:19:28
-
- 7_ptonoff_01_005.sch
- Pulse tube off between 22:08:39 and 22:11:13.
-
-
-
-
-
-
- 7_ptonoff_01_xxx.sch
- Most of this time was spent with the schedule suspended (waiting for someone to switch pulse tubes off and the on?). Not sure if this schedule was run intentionally.
-
-
-
- /home/keck/sch/mce_autotune.sch
- /home/keck/shc/7_ptonoff_02_001.sch tests at different elevations and dk rotations
- /home/keck/sch/7_ptonoff_01_004.sch: done with blocks between the pulse tube bellows on Rx2, then Rx1, and with no blocks.
- weather: beautiful
-
keckdaq Run 4 (Rx0, Rx1, Rx2, Rx3, Rx4; Feb 2012 - Nov 2012)
LINKS:
keckdaq Run 9 |
keckdaq Run 8 |
keckdaq Run 7 |
keckdaq Run 6 |
keckdaq Run 5 |
keckdaq Run 3 |
keckdaq Run 2 |
keckdaq Run 1 |
keckdaq Run 0 |
mapodaq (summer lab tests)
-
- Took down far field flat.
-
- 7_ffflat_rps_01b_000.sch
- RPS raster schedule with rx1 at the back of the mirror. Some mirror coverage for rx0, rx2.
- Source attenuator settings: Rocky = 38, Severe Backlash = 50.
- Tilt meter archived as BICEP2 pmac.fast_aux_input[1].
- Rx3 and Rx4 are warming up.
- Schedule was first started at 121122 17:01:10, but then aborted at 121122 18:53:00, because the telescope wasn't moving. Not sure what was causing the problem.
- Checked tilt meter temperature before taking down the RPS = -12.3°C.
-
- Shut off compressors for rx3 (K4) and rx4 (K5). For each cryostat, tested for He3 using the RGA as the 4K plate warmed up from ∼3K to ∼30K. No He3 detected in either cryostat.
- cycleFridge enable=2, rx=rx0+rx1+rx2
-
- 7_ffflat_rps_keck_01a_001.sch
- RPS raster schedule with rx0 at the back of the mirror. Some mirror coverage for rx1, rx4.
- Source attenuator settings: Rocky = 38, Severe Backlash = 50.
- Tilt meter archived as BICEP2 pmac.fast_aux_input[1].
-
-
- 7_ffflat_rps_keck_01c_000.sch
- RPS raster schedule with rx2 at the back of the mirror. Some mirror coverage for rx1, rx3.
- Source attenuator settings: Rocky = 38, Severe Backlash = 50.
- Tilt meter archived as BICEP2 pmac.fast_aux_input[1].
- Light clouds, windspeed = 8.7 kts.
- First attempt to start this schedule at 121120 02:23:58. Aborted at 121120 02:52:04 because maintenance on the cooling loop fan caused receivers to warm up.
-
- fridgecycle.sch
- Also cleaned out the azimuth bearing, following Robert's instructions.
-
- 7_ffflat_moon_keck_02_000.sch
- Completed last two dk angles of moon raster schedule (previous schedule was 7_ffflat_moon_keck_01_000.sch).
- Good weather, with some clouds on the horizon.
-
- 7_ffflat_rps_keck_02d_000.sch
- Finished up RPS measurement with rx3 at the back of the mirror (previous schedule was 7_ffflat_rps_keck_01d_002.sch). Started at el offset = +1.6°.
-
- 7_ffflat_moon_keck_01_000.sch
- Keck moon scan. Unlike other Keck beam maps, we are using a mirror pointing model in gcp, so that it knows how to point at the moon.
- encoder_zeros -178.824425, -80.106166, 0
- encoder_cals 337638296, -3600000, 50771358
- Fast scan (2.8 deg/sec in az), elevation steps of 0.0625°, dk angles -194, -122, and -50.
- Some clouds near the horizon, but the moon is visible. Weather has been changing quickly today, between overcast and clear.
- Aborted schedule, partway into the second dk angle, to work on the RPS.
-
- Rehomed the mount.
- All azdiff values were >100000 before homing.
-
-
- 7_ffflat_rps_keck_01d_002.sch
- Restarted RPS raster schedule, but now the rps_get command treats timeout as success.
- Aborted schedule after we lost the chop reference.
-
- 7_ffflat_rps_keck_01d_001.sch
- RPS raster schedule with rx3 at the back of the mirror. Some mirror coverage for rx2, rx4.
- Source attenuator settings: Rocky = 38, Severe Backlash = 50.
- Tilt meter archived as BICEP2 pmac.fast_aux_input[1].
- Very overcast, ∼12 kts wind.
- Schedule aborted, because a request for the RPS position timed out after 60(!) seconds.
-
- 7_ffflat_rps_keck_01d_000.sch
- RPS raster schedule with rx3 at the back of the mirror. Some mirror coverage for rx2, rx4.
- Source attenuator settings: Rocky = 38, Severe Backlash = 50.
- Tilt meter archived as BICEP2 pmac.fast_aux_input[1].
- Very overcast, ∼16 kts wind.
- Schedule aborted, because a request for the RPS position timed out after 20(!) seconds. Increased all RPS timeouts to 60 seconds and restarted the schedule.
-
-
- 7_ffflat_rps_keck_01e_004.sch
- RPS raster schedule with rx4 at the back of the mirror. Some mirror coverage for rx0, rx3.
- Source attenuator settings: Rocky = 38, Severe Backlash = 50.
- Tilt meter archived as BICEP2 pmac.fast_aux_input[1].
- Schedule completed successfully (finally!).
-
- 7_ffflat_rps_keck_01e_003.sch
- RPS raster schedule with rx4 at the back of the mirror. Some mirror coverage for rx0, rx3.
- Source attenuator settings: Rocky = 38, Severe Backlash = 50.
- Tilt meter archived as BICEP2 pmac.fast_aux_input[1].
- Schedule aborted when bicep.usap.gov went down, killing communication to the RPS.
-
-
- Recharged RX3 (Station 4) to 300psi
- Recharged RX1 (Station 2) to 290psi
-
- 7_ffflat_rps_keck_01e_002.sch
- RPS raster schedule with rx4 at the back of the mirror. Some mirror coverage for rx0, rx3.
- Source attenuator settings: Rocky = 38, Severe Backlash = 50.
- Tilt meter archived as BICEP2 pmac.fast_aux_input[1]. Still very windy.
- Additional heater mounted on the source box and wired in parallel with the heater on the tilt meter platform.
- Aborted schedule due to problems with the RPS. Also, the chop reference signal was out for this entire schedule.
-
-
- 7_ffflat_rps_keck_01e_001.sch
- RPS raster schedule with rx4 at the back of the mirror. Some mirror coverage for rx0, rx3.
- Modified rps_get command in rpslib.sch so that it waits 20 seconds before timeout, rather than 10.
- Source attenuators both set to 35.
- Tilt meter archived as BICEP2 pmac.fast_aux_input[1].
- Very windy. Checked tilt meter in DSL after the schedule aborted: 0.220 to 0.253 V. Tilt meter temperature is -14.75°C.
- Schedule aborted when keck32 /data disk filled up. Significant amounts of the data are probably unreliable. Some parts of log are missing.
-
- 7_ffflat_rps_keck_01e_000.sch
- RPS raster schedule with rx4 at the back of the mirror. Some mirror coverage for rx0, rx3.
- RPS stage now starts at 16.73° and increments in 30° steps.
- Source attenuators both set to 35.
- Tilt meter is being archived in BICEP2 data as pmac.fast_aux_input[1].
- Schedule aborted after 19 RPS angles (6 angles into the second strip) because of a timeout during RPS communication.
-
-
- 7_ffflat_rps_keck_01a_000.sch
- First trial run of the Keck RPS schedule.
- RPS stage starts at 346.27° and increments in 30° steps. Need to fix the schedule so that it starts closer to zero.
- RPS tilt meter fluctuating between -0.200 and -0.220 Volts. Tilt meter output is archived as pmac.fast_aux_input[4] in BICEP2 data.
- Schedule aborted after 10 RPS angles, because of a timeout during RPS communication.
-
- 7_ffflat_dslmast_29a_001.sch
- Fast raster schedule to check that we can see the RPS.
- RPS stage set to 0 degrees. Source attenuators both set to 35 (rocky and severe backlash).
- PIN switch chop is working this time.
-
-
- 7_ffflat_dslmast_29a_000.sch
- Testing whether we can see the RPS. rx0 at the back of the mirror.
- RPS stage set to 0 degrees. Source attentuators all the way open.
- Fast scan (0.8 deg/sec) version of the usual beam map schedule.
- RPS chop was not working due to a cabling problem.
-
-
- 121109 09:17:46 7_ffflat_dslmast_28i_006.sch
- RX3 & RX4
-
- 121105 20:35:08 7_ffflat_dslmast_28a_003.sch
- Chop at ~18Hz (20V)
-
- 121105 04:57:00 7_ffflat_dslmast_28f_005.sch
- Chop accidently at ~2Hz
-
- PT on/off tests, Rx1
- /home/keck/sch/mce_autotune.sch
- schedule /home/keck/sch/config_hw.sch
- combine off, n=1
- 121102 21:20:09 about to do some PT off action
- 121102 21:22:16 turning off compressor for RX1
- 121102 21:23:52 turning back on compressor for RX1
- 121102 21:22:16 turning off compressor for RX1
- 121102 21:23:52 turning back on compressor for RX1
- Clearly less noise/skewness when PT off in channels 176, 181, 290, 303
- Bias change tests, Rx1
- First increase bias by 100
- 121102 22:08:40 mce_stop_acq
- 121102 22:08:45 mceGeneric “bias_tess 3000 2900 2700 2900 2600 2500 2500 2500 3100 3100 3200 3200 1600 1400 1400 1300”, mce=mce1
- 121102 22:08:51 mce_start_acq
- Next increase bias by 200
- 121102 22:12:56 mce_stop_acq
- 121102 22:13:03 mceGeneric “bias_tess 3200 3100 2900 3100 2800 2700 2700 2700 3300 3300 3400 3400 1800 1600 1400 1500”, mce=mce1
- 121102 22:13:07 mce_start_acq
- No clear change in channels 176, 181, 290, 303
- Bias step from normal, Rx1
- 121102 22:20:46 mceGeneric “bias_tess 6000”, mce=mce1
- 121102 22:20:46 mceGeneric “bias_tess 6000”, mce=mce1
- 121102 22:23:41 mceGeneric “bias_tess 5000”, mce=mce1
- 121102 22:24:56 mceGeneric “bias_tess 4500”, mce=mce1
- 121102 22:27:13 mceGeneric “bias_tess 4000”, mce=mce1
- 121102 22:28:42 mceGeneric “bias_tess 3700”, mce=mce1
- 121102 22:30:29 mceGeneric “bias_tess 3500”, mce=mce1 … 290, 303, 181 start to show skewnewness
- 121102 22:32:42 mceGeneric “bias_tess 3300”, mce=mce1
- 121102 22:33:57 mceGeneric “bias_tess 3100”, mce=mce1
- 121102 22:35:12 mceGeneric “bias_tess 2900”, mce=mce1
- 121102 22:36:01 mceGeneric “bias_tess 2600”, mce=mce1 … latched detectors, skewness never went away.
- 121102 22:36:45 mceGeneric “bias_tess 2300”, mce=mce1
- 121102 22:39:44 mceGeneric “bias_tess 2200”, mce=mce1
- Tried unmounting the pulse tube motor and suspending it on bungees so it was not touching cryostat. Tried loosening PT below screws. Tried tightening PT below screws. None of these changed the skewness in the timestreams we could see by eye
- Banging on bottom of cryostat with plastic hammer clearly shows response in all detectors.
- 121103 02:41 Placed Al blanking plate on front of cryostat. (Look for loading change as eveidence for mirror on) Skewness not noticibely changed. (P-P amplitude maybe down, but we think this is due to changes in operating point).
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_keck_5rx_UCenthalpy.sch
-
- cycleFridge enable=3, on all rx
-
- Last run of the season until tomorrow morning :)
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_064.sch
- masd3, keck36 was unresponsive had to reboot keck36
- 121031 20:58:00 abort_schedule
- /home/keck/sch/mce_autotune.sch
- weather: mostly clear, some high clouds
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_063.sch
- /home/keck/sch/runend.sch
- weather: clear - bit hazy, some high clouds
- window and baffles:
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_062.sch
- /home/keck/sch/runend.sch
- weather: blowing snow, hazy - clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_061.sch
- az tripped again
- 121026 02:32:46 suspend_schedule
- this time it seemed to have been the az motor connectors
- 121026 03:21:42 resume_schedule
- az tripped again
- 121026 07:46:24 suspend_schedul
- this time it seemed to have been the az motor connectors, again
- 121026 07:54:02 resume_schedule
- finished the run without further problems
- /home/keck/sch/runend.sch
- weather: blowing snow, clear overhead - hazy, blowing snow
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 4,5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_060.sch
- az motor tripped
- 121024 02:52:29 suspend_schedule
- replaced az motor and controller, dk motor tripped - lose wire
- all running again
- 121024 04:40:26 resume_schedule
- running good for reminder of run
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_059.sch
- good az diff values for a while, but then jumped around a bit
- 121022 02:41:00 suspend_schedule
- loosened osborne rollers on "3" a bit, one roller was ceased up, adjusted readheads
- 121022 03:41:49 resume_schedule
- /home/keck/sch/runend.sch
- weather: overcasted - clearing - clear
- window and baffles:
-
- cycleFridge enable=2, on all rx
- loosened osborne rollers on "1" a bit
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_058.sch
- /home/keck/sch/runend.sch
- started fridgecycle late, thought it was in the queue, but wasn't while clearing snow of roof
- weather: clear to total overcast at runend
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 2,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_057.sch
- /home/keck/sch/mce_autotune.sch
- weather: blowing snow, scattered clouds - clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_056.sch
- /home/keck/sch/runend.sch
- weather: clear to high winds, scattered clouds
- window and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
- spudws1 froze
- restarted gcp and masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_055.sch
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_054.sch
- /home/keck/sch/runend.sch
- weather: blowing snow, high winds, slight overcast
- window and baffles: very little snow on windows, some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_052.sch
- jump in az diff readhead A3
- 121010 09:43:17 abort_schedule
- 121010 09:45:33 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_45_053.sch
- spudws1 froze
- /home/keck/sch/runend.sch
- restarted gcp and masd
- weather: clear - overcasted
- window and baffles: windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_051.sch
- /home/keck/sch/runend.sch
- weather: hazy - clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_050.sch
- /home/keck/sch/runend.sch
- weather: clear - hazy
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 2,4
- /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_049.sch
- did Sarah's combine off, compressor off test
- schedule 7_combineoff_01_001.sch
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_048.sch
- pmac stopped again during skydip!?
- rx3 starting to warm up early again
- /home/keck/sch/runend.sch
- weather: blowing snow, clearing to clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_047.sch
- /home/keck/sch/mce_autotune.sch
- weather: blowing snow, high clouds
- window and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- comp 1 still leaking, we can locate the leak very good in X but not as easy in Y,
- since the lines are so close, even when shielding the lines with a plastic bag
- swapped high and low pressure line of compressor 1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_046.sch
- pmac tripped, some az problem
- 120928 09:11:51 suspend_schedule
- some black goo was under readhead A2, cleaned and readjusted readhead
- 120928 10:16:37 resume_schedule
- /home/keck/sch/mce_autotune.sch
- weather: some blowing snow
- window and baffles: windows clear, a little snow in the baffles
-
- cycleFridge enable=2, on all rx
- found leak !!
- swapped high pressure line of compressor 1 for spare line (N2)
- recharged compressor 1
-
- /home/keck/sch/runend2.sch
- rx2 wasn't cold yet, therefore didn't include it in tuning
- /data/keckdaq/autoqueue/pending/9_kCMB_45_045.sch
- 09:00 rx2 cooled down, waiting for the next skydip to include it in tuning
- 120925 16:28:10 abort_schedule
- 120925 16:28:10 Starting schedule: /home/keck/sch/mce_autotune.sch
- aborting run messed up temperatures on all rx, warmed up to .5K
- reset temperatures, all rx came down quite fast, except rx2, so starting run again without rx2
- 120925 16:57:30 Starting schedule: /home/keck/sch/runend2.sch
- 120925 17:06:18 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_45_045.sch
- power outage around 20:30 on 120925
- compressors came back on, but pmac stopped and TCP/IP error, although hubs are on UPS?
- 120925 21:02:01 Starting schedule: /home/keck/sch/runend2.sch
- 120925 21:09:31 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_45_045.sch
- same problem again as a few days ago, most values "0", telescope still scanning
- aborted run, was in the middle of last scanset, rebooted keck31, restarted gcp, masd
- /home/keck/sch/runend2.sch
- put one hub on UPS, so everything essential should be on UPS now
- weather: clear - high winds, blowing snow towards the end
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 1
- overcharged compressor 1, compressor shut down,
- cooling back down, but won't be ready for runstart
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_044.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 1, losing about 15psi/day
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_043.sch
- masd3, keck36 quite again
- /home/keck/sch/mce_autotune.sch
- weather: high winds, blowing snow - clearing
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 1,2,4,5
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_042.sch
- strange behavior, telescope was running fine, then suddenly most keckviewer
- values showed "0", pmac indicated it stopped, but the telescope was still scanning?
- 120919 15:50:33 abort_schedule
- restarted gcp and masd
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_042.sch
- weather: blowing snow, high winds
- window and baffles:windows clear, some snow in baffles
-
- cycleFridge enable=2, on all rx
- recharged compressor 1
- "tightened" all osborne rollers
-
- /home/keck/sch/mce_autotune.sch
- pmac stoped during skydip, missed first scanset
- /data/keckdaq/autoqueue/pending/9_kCMB_45_041.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear - clear overhead, blowing snow
- window and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_040.sch
- knock test on rx1
- /data/keckdaq/autoqueue/pending/7_ptonoff_01_003.sch
- /home/keck/sch/mce_autotune.sch
- weather: blowing snow, high clouds - clearing
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_039.sch
- didn't make the first scanset again by a few minutes!!
- started autotune over since temperatures are more settled now
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_039.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_combineoff_01_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear - overcasted, windy, blowing snow
- window and baffles: very little snow on windows, some snow in baffles
-
- cycleFridge enable=2, on all rx
- recharged compressor 1, 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_038.sch
- cooldown of rx3 a bit slow missed 0530 scanset by 4 min !!!
- in last scanset, test comps and PT motors off
- 120913 02:20:23 Starting schedule: /data/keckdaq/autoqueue/pending/7_ptonoff_01_002.sch
- test comps and PT motors off
- /home/keck/sch/mce_autotune.sch
- weather: clear, cold
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_037.sch
- 120911 02:25:36 starting schedule 7_ptonoff_01_xxx.sch
- 120911 02:47:27 Start taking pulsetube-off data. Type resume_schedule when complete
- 120911 02:55:36 resume_schedule
- 120911 02:56:44 Exiting schedule: /data/keckdaq/autoqueue/pending/7_ptonoff_01_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: high clouds, blowing snow - clearing, getting cold again, clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 1, we got another leak!
- changed cable A02 between K1 backpack and blastbus
-
- /home/keck/sch/runend.sch
- rx3 has slow cool down, probably due to star pointing, therefore runend.sch for tuning
- but want to start the run since weather is so good
- /data/keckdaq/autoqueue/pending/9_kCMB_45_036.sch
- rx 3 never cooled down, rx1 warmed up early, cloud see the difference in the fridge cycle
- /home/keck/sch/runend13.sch
- weather: clear, to hazy, high clouds blowing snow
- window and baffles: windows clear, quite a bit of snow in the baffles
-
- cycleFridge enable=2, on all rx
- pump 2 didn't had enough flow, oil temperature was getting high, switched to pump 1
- Nate and I are investigating
- /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_035.sch
- /home/keck/sch/mce_autotune.sch
- weather: clearing, cold- clear, very cold, <-100F
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 2,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_034.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear with high clouds
- window and baffles: windows clear, very little snow on the windows
-
- cycleFridge enable=2, on all rx
- recharged compressor 1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_033.sch
- /home/keck/sch/mce_autotune.sch
- weather: high clouds
- window and baffles: windows clear, very little snow in baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_032.sch
- /home/keck/sch/mce_autotune.sch
- weather: some clouds a bit hazy
- window and baffles: windows clear, baffles very little snow
-
- cycleFridge enable=2, on all rx
- recharged compressor 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_031.sch
- telescope run into limit!? not an az diff problem, no jump or count loss !!!!
- 120828 13:24:37 suspend_schedule
- moved telescope carefully out of limit, tested all switches, alignments etc.
- rehomed, all good
- 120828 14:22:10 resume_schedule
- after 2.5 scan cycles the telescope stopped again, all motor loops open, but it wasn't at a
- limit switch ????? "a" in pmac closed the loops and driving it by hand everything seemed fine
- rehomed, this time I restarted the schedule
- 120828 20:28:20 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_45_031.sch
- 120828 20:28:10 abort_schedule
- 120828 20:28:20 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_45_031.sch
- looks like the problem was one of the emergency stop buttons
- /home/keck/sch/mce_autotune.sch
- weather: hazy and cloudy,
- window and baffles:windows clear, baffles had some snow
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_030.sch
- test: running the daq with out pulse tubes for 3min
- test: after power outage, changes were made to DDC, pump should be always on now
- compressors should come back on and airhandler should turn on as well
- /home/keck/sch/mce_autotune.sch
- test worked, now DDC is configured, how it supposed to
- weather: hazy, some high clouds
- window and baffles: windows clear, some snow in baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_029.sch
- some MCE had no connection, restarted masd
- 120824 20:20:34 schedule /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_029.sch
- /home/keck/sch/mce_autotune.sch
- weather: hazy, blowing snow
- window and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=1, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_029.sch
- POWER OUTAGE at around 1415, compressors shut off, lost TCP/IP to MAPO
- AHU and glycol pump shut off, because compressors where off, oil temp got too high
- could not restart comp right away, fortunately temp rise wasn't too bad even comps were off
- for about 20min
- keckviewer showed TCP/IP error as well stopped masd, restarted gcp
- weather:
- window and baffles:
-
- cycleFridge enable=2, on all rx
-
- changed tuning
- /home/keck/sch/mce_autotune.sch
- changed tuning
- 120822 12:28:35 Starting schedule: /home/keck/sch/mce_autotune.sch
- changed tuning back to lowgain
- 120822 12:39:54 Starting schedule: /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_028.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 1,5
- gcp froze,no updates
- spudws1 totally froze, keck31 showed errors in gcp, rebooted keck31
- took about 40 min to get back online, start another double cycle
- 120822 06:45:26 Starting schedule: /home/keck/sch/fridgecycle.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_027.sch
- schedule /home/keck/sch/runend.sch
- weather: cloudy, warm - clearing, some high clouds
- window and baffles:windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- changes made to tuning templates
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_026.sch
- changes didn't work, restarted masd several times
- reverte to old tuning templates
- 120818 10:39:53 Starting schedule: /home/keck/sch/mce_autotune.sch
- 120818 10:46:53 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_45_026.sch
- schedule /home/keck/sch/runend.sch
- weather: cloudy, warm
- window and baffles: a little snow on the windows, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged compressor 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_025.sch
- schedule /home/keck/sch/runend.sch
- spudws1 froze, had to restart gcp and masd
- weather: a bit hazy to clear, scatterd clouds
- window and baffles:
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_024.sch
- schedule /home/keck/sch/runend.sch
- weather: clear a bit hazy at the end
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- 120814 10:48:55 /home/keck/sch/starpoint_pole_manu_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_023.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 2,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_022.sch
- this schedule contains some small changes for Sarah's tests
- /home/keck/sch/mce_autotune.sch
- weather: clear - some haze towards the end
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- Sarah's schedlib test, new temp schedlib.sch
- /data/keckdaq/autoqueue/pending/7_mcelasttune_test_4_002.sch
- reverted to old (good) schedlib.sch
- 120808 10:41:08 /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_021.sch
- /home/keck/sch/mce_autotune.sch
- weather: getting a bit hazy towards the horizon - clear
- window and baffles:clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_020.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear - getting a bit hazy towards the horizon
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_019.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear - getting overcasted, wind picking up
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_018.sch
- big jump in az !? over 16 Mil.
- data are good until jump and after rehome
- /data/keckdaq/autoqueue/pending/7_mcelasttune_test_3_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: some haze - clear
- window and baffles:clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_017.sch
- mce2 dropped out again
- just restarting masd2 wouldn't help, had to restart keck35 as well
- 120802 05:02:32 starting 7_mcelasttune_test_2_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear & cold - some haze, cold
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 3,4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_016.sch
- 120730 22:48:55 abort_schedule
- changed schedlib to previous version
- 120730 22:52:27 schedule /home/keck/sch/mce_autotune.sch
- 120730 22:59:26 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_45_016.sch
- 120731 04:27:30 abort_schedule
- 120731 04:27:30 Starting schedule: /home/keck/sch/mce_autotune.sch
- 120731 04:36:08 starting 7_mcelasttune_test_1_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear
- window and baffles: clearing - clear & cold
-
- cycleFridge enable=2, on all rx
- recharged compressor 3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_015.sch
- some network problems "keck32-gcp " is currently unreachable
- restarted gcp and masd, switched port on hub, restarted gcp and masd, looks happy again
- 120727 16:04:42 /home/keck/sch/mce_autotune.sch
- 120727 16:11:41 /data/keckdaq/autoqueue/pending/9_kCMB_45_015.sch
- /home/keck/sch/mce_autotune.sch
- weather: hazy, a bit windy, wind dying down, clearing
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 3
-
- /home/keck/sch/mce_autotune.sch
- data/keckdaq/autoqueue/pending/9_kCMB_45_014.sch
- no mce_autotune.sch, schedlib.sch had a problem, but is fixed
- weather: windy and blowing snow, but clearing overhead, wind died down a bit still hazy
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged compressor 3
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_013.sch
- weather: thin clouds, high winds, blowing snow, - windy and blowing snow, but clearing overhead
- window and baffles: windows clear, little snow in
-
- cycleFridge enable=2, on all rx
- recharged compressor 5
- spudws1 froze, restarted gcp and masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_012.sch
- weather: hazy, windy, blowing snow, wind increasing blowing snow
- window and baffles:some snow on windows and quite a bit in the baffles
-
- cycleFridge enable=2, on all rx
- recharged compressor 2,3 and 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_011.sch
- merging finished 120720 11:20, started crontabs again
- /home/keck/sch/mce_autotune.sch
- weather: clear to hazy, windy, blowing snow
- window and baffles:windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- cycleFridge enable=4, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_019.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_020.sch
- /home/keck/sch/mce_autotune.sch
- started merging of temporary /data with raid array
- weather: clear overhead, blowing snow
- /home/keck/sch/mce_autotune.sch
- weather: windy, overcasted to hazy, warm
- window and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- turned off masd and gcp
- reset sync box
- started gcp and masd
- SPFS was down for a while catching up again
- recharged compressor 2 and 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_45_000.sch
- changed window purge N2 between scanset CMB4-1700 and CMB4-1750
- /home/keck/sch/mce_autotune.sch
- weather: clear overhead
- window and baffles: clear
-
- spudws1 froze, had to reboot
- restarted gcp and masd
- cycleFridge enable=2, on all rx
- /home/keck/sch/starpoint_pole_manu_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_027.sch
- /home/keck/sch/mce_autotune.sch
- weather: hazy, wind died down, clearing, very warm
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_026.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear to overcast, windy, blowing snow
- window and baffles: small patches of snow on the windows, some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- cycleFridge enable=4, on all rx
- fixed dk motor :)
-
- /data/keckdaq/autoqueue/pending/2_keck_5rx_ICenthalpy.sch
- 120621 19:43:02 tcModule 6, 0, rx=all-rx5-rx6-rx7
- weather: clear, bit windy
- window and baffles: clear
-
- cycleFridge enable=4, on all rx
-
- skynet test, pmac program disabled, because of dk, started previous cmb schedule without motion commands
- not all MCE responsive, rebooted MCE computers, restarted masd
- /home/keck/sch/mce_autotune.sch
- 120620 00:18:06 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_44_025_skynet.sch
- have to move telescope manually with hand controller
- all log entries in keckViewer start with "skynet"
- 120620 00:37:08 skynet: I will start all logs for the skynet testing like that
- 120620 00:37:46 skynet: the pmac program is not running so I will have to slew manually
- 120620 01:35:38 skynet: moved to el=55
- 120620 01:53:48 skynet: moved to az=-130
- 120620 01:59:17 skynet: went by tracker not by pmac stat positions, for az there is a difference of 1 deg
- 120620 02:10:39 skynet: the Skynet antenna is at the peak position for a pass. The ACU was commanded to 189.5 degrees in azimut
- 120620 02:12:18 skynet: and 3.5 degrees in elevation. We were transmitting at that position as of 0202 UTC
- 120620 02:21:09 skynet: moved to az=-140
- 120620 02:37:16 skynet: moved to az=-170
- 120620 02:58:21 skynet: moved to az=-140 el=80
- 120620 03:13:51 skynet: moved to az=-130 el=55
- 120620 03:25:39 skynet: moved to az=-140
- 120620 03:42:54 skynet: moved to az=-170
- 120620 03:58:44 skynet: moved to az=-140 el=80
- 120620 04:00:26 skynet: after this second set we will go to 180 deg opposite of the radome
- 120620 04:15:40 skynet: moved to az=40 el=55
- 120620 04:29:41 skynet: moved to az=-140
- 120620 04:40:56 skynet: The transmitter was off at 0430:30 UTC
- 120620 04:41:22 abort_schedule
- /home/keck/sch/mce_autotune.sch
- weather: clear overhead, blowing snow, windy
- window and baffles:
-
- cycleFridge enable=2, on all rx
-
- /data/keckdaq/autoqueue/pending/2_keck_5rx_ICenthalpy.sch
- 120619 10:50:15 abort_schedule, because of skynet test in 16h
- tcModule 6, 0, rx=all-rx5-rx6-rx7
- 120619 10:58:05 schedule /home/keck/sch/mce_autotune.sch
- 120619 11:04:34 Starting schedule: /data/keckdaq/autoqueue/pending/1_superfastnoise_1_007.sch
- schedule didn't seem to run
- 120619 13:40:19 abort_schedule
- 120619 13:40:58 schedule /home/keck/sch/mce_autotune.sch
- weather: clear, bit hazy, windy
- window and baffles:
-
- cycleFridge enable=4, on all rx
-
- /data/keckdaq/autoqueue/pending/1_keck_5rx_UCenthalpy.sch
- 120619 01:25:54 tcModule 3, 0, rx=all-rx5-rx6-rx7
- weather: bit hazy, clear
- window and baffles:
-
- cycleFridge enable=4, on all rx
-
- dk problems, pmac program is tripped, no motion on dk possible as for now
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/2_keck_5rx_ICenthalpy.sch
- tcModule 6, 0, rx=all-rx5-rx6-rx7
- aborted ICenthalpy to do a quadruple cycle
- weather: clear, windy
- window and baffles:
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_025.sch
- 120614 14:33:07 suspend_schedule
- problems with dk, causing pmac to stop, had to go by hand to high el and then move dk
- 120614 14:39:19 resume_schedule
- rx3 warmed up about 14h early !!!!!
- /home/keck/sch/runend.sch
- weather: windy, blowing snow, hazy, clearing overhead towards the end
- window and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp1 and comp2 to 290psi
-
- Martin updated schedlib and control.init
- restart gcp and masd
- /home/keck/sch/mce_autotune.sch
- 120612 14:26:37 /data/keckdaq/autoqueue/pending/1_framerates_noise_001.sch
- 1_framerates_noise_001.sch hung up at the end, aborted schedule
- restarted mce computers and masd
- 120612 19:00:56 Starting schedule: /home/keck/sch/mce_autotune.sch
- 120612 19:07:27 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_44_024.sch
- had to restart gcp as well aborted schedule
- 120612 19:22:42 Starting schedule: /home/keck/sch/mce_autotune.sch
- 120613 03:44:50 Exiting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_44_024.sch
- MCEs quit, restarted masd
- schedule was still on previous scan cycle, restarted schedule
- 120613 03:44:57 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_44_024.sch
- more problems keckviewer stopped updating and showed some strange entries, will restart gcp and masd
- 120613 05:46:39 Starting schedule: /home/keck/sch/mce_autotune.sch
- 120613 05:53:10 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_44_024.sch
- now that run finally went through
- rx3 warmed up a bit early
- /home/keck/sch/runend.sch
- weather: clear, windy towards the end with blowing snow and haze
- window and baffles: windows clear, baffles very little snow
-
- cycleFridge enable=2, on all rx
- recharged rx3 to 297psi
- fan belt in air handler has to be replaced
- cooled down glycol below normal operational temperature to shut off air handler for a couple of minutes
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_023.sch
- /home/keck/sch/runend.sch
- rx3 warmed up a bit early
- weather: clear, cold
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- updated schedlib and control.init
- restart gcp and masd
- reverted to old schedlib and control.init, because of an error
- restart gcp and masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_022.sch
- 120608 23:05:23 suspend_schedule
- problems with one readhead roller, az diff was still perfect, but it probably wouldn't have been for long
- 120608 23:17:05 resume_schedule
- masd2 on keck35 stopped again
- /home/keck/sch/mce_autotune.sch
- weather: light cloud cover, hazy, clear at the end
- window and baffles: windows clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_021.sch
- masd2 on keck35 quite again
- restarted keck35 and masd2
- /home/keck/sch/mce_autotune.sch
- rx 3 hold it's temperature, no jumps in az diff
- weather: hazy to clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 2,5 to 290psi
- /home/keck/sch/starpoint_pole_manu_summer.sch
- hazy, but there is some time until cmb schedule so I just do summer star pointing
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_020.sch
- rehomed during scansets, pointing still good
- /home/keck/sch/mce_autotune.sch
- 120606 07:08:42 suspend_schedule
- big jump in az-diff, pointing good until jump and after rehoming
- 120606 07:15:42 resume_schedule
- weather: hazy, thin clouds, windy, blowing snow
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp4 to 295psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_019.sch
- during the run masd22 on keck35 stopped again working
- restarted keck35 and masd2
- 120604 09:22:47 abort_schedule
- big az diff jump at the end of the run, pointing is good until jump
- /home/keck/sch/mce_autotune.sch
- weather:hazy and clear, windy
- window and baffles: windows clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_018.sch
- 120601 09:37:08 suspend_schedule
- big jump in az-diff data are good til the jump and after rehoming (resuming schedule)
- 120601 09:45:53 resume_schedule
- /home/keck/sch/mce_autotune.sch
- rx3 was holding !!
- weather: clear and a bit hazy, windy
- window and baffles:windows clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_017.sch
- rearranging the baffle heater plugs seems to work
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged rx3 to 293psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_016.sch
- /home/keck/sch/runend.sch
- masd2 on keck35 had a broken pipe and didn't record data for a while
- restarted keck35 and masd2, after a while it was taking data again
- some problems with the forebaffle heaters, keeps tripping the power strip up in the mount
- and burning the fuse in the variac
- weather: clear
- window and baffles: clear
-
- restarted gcp and masd, due to frozen spudws1
- cycleFridge enable=2, on all rx
- recharged comp2 to 290psi
- 120527 14:18:28 Starting schedule: /home/keck/sch/starpoint_pole_manu_winter.sch
- 120527 16:08:15 Exiting schedule: /home/keck/sch/starpoint_pole_manu_winter.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_015.sch
- 120526 16:40:09 suspend_schedule
- az diff jump, rehomed, pointing good up to jump and after rehoming
- 120526 16:45:23 resume_schedule
- 120526 19:44:24 suspend_schedule
- az diff jump, rehomed, pointing good up to jump and after rehoming
- 120526 19:50:43 resume_schedule
- 120526 21:58:48 suspend_schedule
- az diff jump, replaced roller on redhead 3A
- 120526 22:37:16 resume_schedule
- 120527 01:23:46 suspend_schedule
- az diff jump, problems with redhead 4A, replaced that one
- 120527 02:19:30 resume_schedule
- 120527 09:24:38 abort_schedule for fridgecycle
- /home/keck/sch/runend.sch
- spudws1 froze, had to restart
- weather: clear, but a bit windy blowing snow
- window and baffles:tiny bit of snow on the windows, some snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_014.sch
- small jump in az diff, but pointing is good
- rx3 warmed up earlier than the last days, so it might correlate with weather
- weather: hazy to light overcast to clear
- window and baffles:clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_013.sch
- /home/keck/sch/mce_autotune.sch
- rx3 warmed up but not as early, continue with mce_autotune at runend
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_018.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_012.sch
- 120521 01:58:05 suspend_schedule
- there was a jump on the az-diff real time plot, but just a single spike and values afterwards
- were good again and normal like before, to make sure I rehomed and pointed at AlpCar before
- and after, seems not to have affected pointing
- that spike doesn't show up in the examiner plots
- 120521 02:13:53 resume_schedule
- /home/keck/sch/mce_autotune.sch
- rx 3 warmed up early, but didn't seem so bad as previous runs, so running mce_autotune again
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- recharged comp 4 to 290 psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_011.sch
- 120518 09:52:48 suspend_schedule
- jump in az diff on A1, rehomed
- jump in az diff, data are good until that jump and after rehoming
- 120518 10:00:15 resume_schedule
- /home/keck/sch/mce_autotune.sch
- rx3 warmed up early again, also tried to run mce_autotune.sch to see if that makes any difference
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_010.sch
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles:clear
-
- cycleFridge enable=2, on all rx
- recharged comp 2,5 to 290 psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_009.sch
- 120514 16:35:16 suspend_schedule
- az diff jump, disregard the data til the resume of schedule, rehomed
- 120514 16:43:53 resume_schedule
- 120515 07:28:14 abort_schedule
- /home/keck/sch/mce_autotune.sch
- big jump in az diff, data are good until that jump
- /home/keck/sch/starpoint_pole_manu_summer.sch
- rx3 warmed up early again, but run was already aborted
- weather: partly cloudy to clear
- window and baffles:clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_008.sch
- /home/keck/sch/runend.sch
- weather: clear to a bit hazy
- window and baffles: windows clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 4,5 to 290 psi
- /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_007.sch
- /home/keck/sch/runend.sch
- weather: hazy to overcasted to clear
- window and baffles: windows clear, little snow in the baffle
-
- cycleFridge enable=2, on all rx
-
- set servo gains to low
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_016.sch
- got little hazy during the first knoise run
- set servo gains to pgain20
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_017.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_006.sch
- /home/keck/sch/runend.sch
- weather: clear to hazy to total overcasted
- window and baffles: windows clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_005.sch
- 120506 02:11:07 suspend_schedule
- az diff jumped to just over 100000, pointing probably good, but diregard the data from that
- jump until rehomed, run continued without az problems
- 120506 02:27:02 resume_schedule
- rx3 warmed up early
- /home/keck/sch/runend.sch
- weather: overcasted to haze
- window and baffles:windows clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged comp 3 to 290psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_004.sch
- pmac was running before runstart, but then stopped at el=50 ???
- /home/keck/sch/mce_autotune.sch
- weather: totally overcasted to haze, not clear but brighter stars are visible overhead
- window and baffles: windows clear, baffles some snow
-
- cycleFridge enable=2, on all rx
- recharged comp 1, 2, 4 to 290psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_003.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear and then totally overcasted, can't even see the moon, wind picking up
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- spudws1 froze
- restarted gcp and masd
- recharged comp 4
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_002.sch
- /home/keck/sch/mce_autotune.sch
- az diff made jump in the last scanset, but pointing was still good
- weather: nice and clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /data/keckdaq/autoqueue/pending/1_data_mode_test_001.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_44_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: blowing snow, wind easing towards the end
- window and baffles: windows clear, little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/4_dkrot_09_009.sch
- 120425 18:31:27 schedule /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_018.sch
- 120425 19:52:44 abort_schedule
- /home/keck/sch/mce_autotune.sch
- 120425 20:04:19 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_43_002.sch
- weather: blowing snow, thin cloud cover
- window and baffles: windows clear, a little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_superfastnoise_1_007.sch
- only keck34 made it all the way through
- mce 0 and mce4 unresponsive, gcp went into a semi frozen state
- had to restart gcp and masd
- rebooted keck33 to 37
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_43_001.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear to light cloud cover, wind is picking up, blowing snow
- window and baffles: Windows clear, a little snow in the baffles
-
- cycleFridge enable=2, on all rx
- /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_dyndeadlist_017.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear to overcasted, wind picking up
- window and baffles:windows clear, very little snow on the baffle
-
- cycleFridge enable=2, on all rx
- recharged rx4 (comp5) to 291psi
- /home/keck/sch/starpoint_pole_manu_summer.sch
- rx3 cooldown really slow, starting another single cycle
- 120420 17:52:56 cycleFridge enable=1, rx=all-rx5-rx6-rx7
- but did double cycle
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_017.sch
- /home/keck/sch/mce_autotune.sch
- rx3 just started to warm up right at the end of the run
- weather: overcasted, clearing towards the end
- window and baffles: windows clear, at some spots thin layer of snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_016.sch
- keck33 problems with masd
- keck33 unresponsive, rebooted keck33
- 120416 18:24:27 Starting schedule: /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_016.sch
- /home/keck/sch/mce_autotune.sch
- weather: overcasted
- window and baffles:windows clear, very little snow in the baffles
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_015.sch
- /home/keck/sch/mce_autotune.sch
- weather: overcasted, partly clear, blowing snow
- window and baffles: windows clear, some snow in the baffles
-
- cycleFridge enable=2, on all rx
- recharged rx=1 to 296psi, rx3 to 291psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_dyndeadlist_014.sch
- /home/keck/sch/mce_autotune.sch
- weather: overcasted to clearing
- window and baffles: windows clear, very little snow in the baffle
-
- cycleFridge enable=3, on all rx
- triple cycle since I aborted the run and got some extra time
- /home/keck/sch/az_test.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_014.sch
- keck32 filled up, rm files up to end of March
- 120412 10:36:55 aborted run, az had problems, goo under readhead A2
- /home/keck/sch/runend.sch
- weather: clear
- window and baffles:
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_013.sch
- rx3 was warming up a bit early again
- weather: cloudy first part, then clear
- window and baffles:clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- Martin's mask still not working right
- 120406 20:42:32 Starting schedule: /home/keck/sch/mce_autotune.sch
- mask's are working now
- 120406 21:23:23 schedule /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_012.sch
- readhead A3 had some problems, so 2 az diff values were high, the other ones were good
- still pointing was off by about 6 arcmin
- weather: first clear and very cold, then cloud cover
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_011.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
- spudws1 froze
- restarted gcp and masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_010.sch
- /home/keck/sch/mce_autotune.sch
- weather: clear and cold
- window and baffles: both clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 120401 19:59:48 Starting schedule: /data/keckdaq/autoqueue/pending/2_servo_raster.sch
- /home/keck/sch/mce_autotune.sch
- 120402 02:36:21 Starting schedule: /data/keckdaq/autoqueue/pending/2_servo_raster2.sch
- /home/keck/sch/mce_autotune.sch
- 120402 05:07:40 starting schedule 1_superfastnoise_1_006.sch
- 120402 13:38:20 abort_schedule
- schedule was overdue and nothing seems to happen
- /home/keck/sch/mce_autotune.sch
- schedule was overdue and nothing seems to happen
-
- cycleFridge enable=3, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 2_keck_5rx_ICenthalpy.sch
-
- cycleFridge enable=3, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 2_keck_5rx_ICenthalpy.sch
- restarted gcp and masd to get drive system responsive again
- 120331 01:25:40 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
-
- cycleFridge enable=3, on all rx
-
- cycleFridge enable=3, on rx=1,3
- cycleFridge enable=2+1, on rx=0,2,4
-
- major work on pmac and drive system, telescope is locked out
- keck31 was offline for several hours, restarted gcp and masd
-
- cycleFridge enable=1, on all rx
- single cycle
- Martin is doing some tuning
-
- cycleFridge enable=2, on all rx
-
- cycleFridge enable=2, on all rx
- motion control problems, violent oscillations on az axis
- restarted gcp and masd
- telescope is locked out
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_009.sch
- /home/keck/sch/runend.sch
- rx3 warmed up a bit early again
- weather: clear
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_008.sch
- /home/keck/sch/runend.sch
- rx3 warmed up a bit early again, besides being at el=80 during cycle
- weather: blowing snow but clearing
- window and baffles: very little snow in the baffles, windows clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_007.sch
- /home/keck/sch/runend.sch
- rx3 warmed up a bit early again, besides being at el=80 during cycle
- weather: blowing snow, windy
- window and baffles: a bit of snow in the baffles, windows clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_006.sch
- /home/keck/sch/mce_autotune.sch
- weather: windy, overcasted, bowing snow, clearing a bit towards the end
- window and baffles:a little snow in the baffles about 1sqin of snow on each window
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_005.sch
- /home/keck/sch/mce_autotune.sch
- weather: first part good, then overcasted increasing wind, blowing snow
- window and baffles: some snow in all the baffles, very little on the windows
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- 120316 20:03:47 schedule /home/keck/sch/servo_raster.sch
- 120316 21:21:38 schedule /home/keck/sch/servo_raster.sch
- Martin's tuning
- 120317 04:56:44 schedule /home/keck/sch/mce_autotune.sch
- 120317 05:01:43 Starting schedule: /data/keckdaq/autoqueue/pending/7_dkrot_09_006.sch
- 120317 05:30:10 Starting schedule: /data/keckdaq/autoqueue/pending/7_dkrot_09_007.sch
- 120317 05:58:23 Starting schedule: /data/keckdaq/autoqueue/pending/7_dkrot_09_008.sch
- 120317 13:01:45 schedule /home/keck/sch/starpoint_pole_manu_summer.sch
- weather: good, very cold
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_004.sch
- rx3 warmed up at 120316 13:00
- weather: very good, very cold for this time of the year, -65C
- window and baffles: clear
-
- cycleFridge enable=2, on all rx
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_003.sch
- rx3 warmed up at about 120314 11:00
- weather: quite nice, occasional cloud cover
- window and baffles: clear of snow
-
- cycleFridge enable=2, on all rx
- fridgecycle looks normal again
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_002.sch
- rx1 warmed up at 120311 21:00, rx2 warmed up at 120312 10:10, rx3 warmed up at 120311 19:00
- fridge cycles looked a bit different before that probably to the load testing we just did before that
- weather: first part very good, than overcasted, warming up and light snow fall
- windows and baffles clear
-
- cycleFridge enable=2, on all rx
- 120310 14:36:58 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
- fridgecycle looked a bit odd, it did a double cycle on all but the 2 cycles were separated more than normal
- I assume that had to do with the loading measurements we did just before
-
- /data/keckdaq/autoqueue/pending/2_keck_5rx_ICenthalpy.sch
- tons of snow in the groundshield, snow in baffles nearly gone, windows clear
-
- cycleFridge enable=2, on all rx
- recharged comp rx3 to 290psi
-
- /data/keckdaq/autoqueue/pending/1_keck_5rx_UCenthalpy.sch
-
- cycleFridge enable=2, on all rx
- problems with cycle on rx1
- recharged comp rx1 to 290psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_000.sch
- spudws1 froze, had to reboot
- only rx2 mce is updating
- 120305 23:20:18 abort_schedule
- restarted gcp and masd
- 120305 23:28:27 Starting schedule: /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_42_001.sch
- weather: absolutly terrible, falling snow, very warm, lots of snow everywhere
- windows partly covered, snow in forebaffles
-
- cycleFridge enable=2, on all rx
-
- Martin did some more tunings
- keck33 froze up again
- had to restart gcp and masd several times
-
- cycleFridge enable=2, on all rx
-
- Martin did some tuning and check on muxrates
- 120303 03:47:40 Starting schedule: /data/keckdaq/autoqueue/pending/1_knoise_muxrate_12_002.sch
- keckviewer went nuts, aborted schedule
- restarted masd and gcp
- Martin did more tunings
- keck33 crashed, all masd were not running
-
- cycleFridge enable=2, on all rx
- fridge cycle takes about 6.5 h with rx1 and rx3 the slowest
-
- 120301 21:56:27 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
- condtions are not perfect, did not see all the stars, will redo asap
- 120301 23:27:13 Starting schedule: /home/keck/sch/mce_autotune.sch
- 120301 23:35:17 Starting schedule: /data/keckdaq/autoqueue/pending/7_dkrot_09_002.sch
- 120302 00:03:35 Starting schedule: /data/keckdaq/autoqueue/pending/7_dkrot_09_003.sch
- 120302 01:21:00 Starting schedule: /data/keckdaq/autoqueue/pending/7_dkrot_09_004.sch
- 120302 01:48:22 Starting schedule: /data/keckdaq/autoqueue/pending/7_dkrot_09_005.sch
-
- cycleFridge enable=2, on all rx
-
- removed mirror frame
- putting on forebaffles
- working on cozies
-
- cycleFridge enable=2, on all rx
-
- sent last cal data out, changed compression to gzip again
- took BAM off
- compressors off for about 25min
- cooling back down again
-
- cycleFridge enable=2, on all rx
-
- 120227 00:46:52 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28i_005.sch
- 120227 08:27:38 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28h_005.sch
- marked all files as sent, turned cronjob sptr_put.pl back on
-
- cycleFridge enable=2, on all rx
-
- 120225 08:18:00 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28h_004.sch
- keck32/data was full again, so rerunning 2 schedules
- 120226 03:59:38 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28j_005.sch
-
- cycleFridge enable=2, on all rx
-
- truned crontab sptr_put.pl off
- 120224 11:26:20 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28f_004.sch
- 120224 19:06:31 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28g_004.sch
-
- cycleFridge enable=2, on all rx
-
- 120222 08:25:04 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28h_000.sch
- 120222 16:05:42 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28f_000.sch
- 120222 23:47:47 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28g_000.sch
- switched back to lzma
-
- cycleFridge enable=2, on all rx
-
- switched back to gzip
- 120221 03:49:41 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28d_003.sch
- 120221 11:29:55 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28i_000.sch
- 120221 19:10:00 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28j_000.sch
-
- cycleFridge enable=2, on all rx
-
- cycleFridge enable=2, on all rx
-
- 120218 03:26:46 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28c_002.sch
- 120218 11:07:37 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28d_002.sch
- 120218 18:50:15 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28e_002.sch
- 120219 02:30:43 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28c_000.sch
- switched back to lzma
-
- cycleFridge enable=2, on all rx
-
- 120216 14:50:43 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28d_001.sch
- 120216 22:30:24 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28e_001.sch
- 120217 06:11:10 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28a_002.sch
- 120217 13:51:43 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28b_002.sch
-
- cycleFridge enable=2, on all rx
-
- problems getting the files out via sat
- 120214 21:51:03 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28e_000.sch
- 120215 05:31:44 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28a_001.sch
- 120215 13:12:23 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28b_001.sch
- 120215 20:52:52 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28c_001.sch
- 120216 04:33:48 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28d_001.sch
- 120216 09:36:09 abort_schedule, FPUs starting to warm up
-
- cycleFridge enable=2, on all rx
- fridge cycle on rx1 and rx2 didn't stop after 2 cycles, finished cylces manually
-
- 120213 05:31:28 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28a_000.sch
- 120213 13:12:13 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28b_000.sch
- 120213 20:52:42 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28c_000.sch
- keck32 /data was full had to delete files up to Feb 2012 to make some room, put /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28c_000.sch back into pending
- 120214 04:38:56 Starting schedule: /data/keckdaq/autoqueue/pending/7_ffflat_dslmast_28d_000.sch
-
- cycleFridge enable=2, on all rx
keckdaq Run 3 (Rx0, Rx2; Nov 2011)
LINKS:
keckdaq Run 9 |
keckdaq Run 8 |
keckdaq Run 7 |
keckdaq Run 6 |
keckdaq Run 5 |
keckdaq Run 4 |
keckdaq Run 2 |
keckdaq Run 1 |
keckdaq Run 0 |
mapodaq (summer lab tests)
-
- Compressors off to drain glycol cooling loop. Run 3 is over.
-
- 7_ffflat_dslmast_21_003.sch
- 20m focal length convex lens in front of the rx2 window.
- Source configuration as 111123 08:50:12.
- rx2 detectors biased to 20000. rx0 still biased to 25000.
- dk = -218 — rx2 is at the back of the drum.
-
- cycleFridge enable=2, rx=rx2
-
- 7_ffflat_dslmast_20_002.sch
- 20m focal length convex lens in front of the rx0 window.
- Source configuration as 111123 08:50:12.
- rx0 detectors biased to 25000. rx2 still biased at 20000, but the UC stage is warming up.
- dk = -98 — rx0 is at the back of the drum.
-
- rx2 near field beam map
- NF mapper oriented 21 +/- 1 degrees CCW looking at sky from FPU.
- tes bias = 20000
-
- cycleFridge enable=2, rx=rx2
-
- rx0 near field beam map
- NF mapper oriented 13 +/- 1 degrees CCW looking at sky from FPU.
- tes bias = 20000
-
- cycleFridge enable=2, rx=rx0+rx2
-
- 8_cyclefridge_003.sch
- cycleFridge enable=2, rx=rx2
-
- 7_ffflat_dslmast_19_002.sch
- Source configuration as 111123 08:50:12.
- rx0 detectors biased to 25000. rx2 detectors biased to 20000.
- dk = -158 — rx0 and rx2 are each 60° from the back of the drum.
- rx2 UC stage warmed up 7 hours into the schedule.
-
- cycleFridge enable=2, rx=rx0+rx2
-
- 7_ffflat_dslmast_21_002.sch
- Source configuration as 111123 08:50:12.
- rx0 detectors biased to 25000. rx2 detectors biased to 20000.
- dk = -218 — rx2 at the back of the drum.
- rx0 UC stage warmed up about 3.5 hours into the schedule. rx2 UC stage warmed up about 7 hours into the schedule.
-
- 8_fridgecycle_002.sch
- cycleFridge enable=2, rx=rx2
-
- 7_ffflat_dslmast_19_001.sch
- Source configuration as 111123 08:50:12.
- rx0 detectors biased to 25000. rx2 detectors biased to 20000.
- dk = -158 — rx0 and rx2 are each 60° off from the back position.
- rx2 UC stage warmed up about 4 hours into the schedule.
-
- 7_ffflat_dslmast_20_001.sch
- Source configuration as 111123 08:50:12.
- rx0 detectors biased to 25000. rx2 is fridge cycling, detectors not biased.
- dk = -98 — rx0 at the back of the drum.
-
- Adjusted ffflat mirror position.
- New position is from file FFF_ultraback_dk0_asbuilt.pdf.
- Rods A, B: 26.2″ from bottom of clamp to bottom of rod.
- Rods E, F: 56.9″ from bottom of clamp to bottom of rod.
- Rods G, H: 23.4″ from bottom of clamp to bottom of rod.
- Mirror normal vector is 39.09° from boresight.
-
- cycleFridge enable=2, rx=rx2
-
- 7_ffflat_dslmast_21_001.sch
- Source configuration as 111123 08:50:12.
- rx2 detectors biased to 20000 (could help the UC last longer). rx0 is fridge cycling, detectors not biased.
- dk = -218 — rx2 at the back of the drum.
- rx2 UC stage warmed up less than 4 hours into the schedule.
-
- cycleFridge enable=1, rx=rx0
-
- 7_ffflat_dslmast_20_000.sch
- Source configuration as 111123 08:50:12.
- rx0 detectors biased to 25000. rx2 fridge is cycling, detectors not biased.
- dk = -98 — rx0 at the back of the drum.
- rx0 UC stage warmed up 7 hours into the schedule.
-
- cycleFridge enable=2, rx=rx2
-
- 7_ffflat_dslmast_19_000.sch
- Beam map with chopped thermal source (“Ze Choppa”)
- Motor power = 26 V / 0.9 A
- Encoder power = 12 V / 0.06 A
- Scoped encoder square wave frequency at 18.18 Hz
- All detectors biased to 25000.
- dk = -158 — corresponds to rx0 and rx2 at the back of the drum.
- Slower, deeper scan than recent BBNS beam map runs.
- rx2 UC ran out after about 5:15 and the FPU warmed up to 730 mK by the end of the schedule.
-
- cycleFridge enable=2, rx=rx2
-
- 7_ffflat_dslmast_18_000.sch
- Source configuration as 111122 21:39:46.
- All detectors biased to 25000.
- rx2 UC has already run out at the start of the schedule, but the IC is probably keeping the FPU cold enough to stay on Al transition. FPU temperature rose from 556 mK to 744 mK over the course of the schedule.
- dk = -158 — corresponds to rx0 and rx2 at the back of the drum.
-
- 7_ffflat_dslmast_17_007.sch
- Source configuration as 111122 08:33:30, except with the 15 dB horn removed. Output is bare WR-6.
- All detectors biased to 25000.
- dk = 24 — corresponds to rx0 and rx2 at the front of the drum… optimally bad. From a quick look at maps, we might have only lost tile 2 for rx0 and tile 1 for rx2.
-
- cycleFridge enable=2, rx=rx0+rx2
-
- 7_ffflat_dslmast_17_006.sch
- BBNS on DSL mast.
- Output is rectangular 15 dB horn. Linearly polarized in the vertical direction.
- Attenuator 06-2220 set to 4.0 (-1 dB).
- Attenuator Hughes set to 2.5 (-0.7 dB).
- Amplifier bias = 11.011 V / 0.978 A, Vsense = 9.40 V
- 18 Hz TTL signal for chop
- rx2 UC stage has already run out, but the IC is keeping focal plane cold enough that we can probably still get on Al transition.
- All detectors (rx0 and rx2) biased to 25000.
- dk = 24 — corresponds to rx0 and rx2 at the front of the drum… optimally bad. From a quick look at maps, we might have only lost tile 2 in rx0 and tile 1 in rx2.
- DSL is clearly visible in maps, but no modulated source at the top of the mast. We think that the 15 dB horn may have been focusing source power enough that it missed MAPO?
-
- cycleFridge enable=2
- Cycle both rx0 and rx2 after recovering from far field flat installation.
-
- cycleFridge enable=3, rx=rx2
- rx2 4K stage has recovered enough to cycle. rx0 is still cooling back down.
- Aborted after one 4He cycle because rx0 was ready to cycle as well.
-
- Installed far field flat.
- Compressors off for ∼1 hour installation. FPUs warmed up to 35K (rx0) and 24K (rx2).
- MCEs turned off for the warmup. This means that they revert back to season 1 deployment firmware.
- Rods are screwed into universal joints with 1″ of additional thread for all rods. This effectively makes the rods 1″ longer; mirror position is set taking this into account.
- The next day, set mirror to back position that can accomodate 2 receivers (file FFF_superback_dk60_asbuilt.pdf).
- Rods A, B: 24.5″ from bottom of clamp to bottom of rod.
- Rods E, F: 58.5″ from bottom of clamp to bottom of rod.
- Rods G, H: 26.2″ from bottom of clamp to bottom of rod.
- Mirror normal vector is 40° from boresight.
-
- 7_sidelobes_mapomast_02_001.sch
- Actually saw really good chopped signal.
- 0.1° elevation steps.
- Schedule finished successfully -- no dk stall.
- Source configuration as 111120 03:31:23.
-
- cycleFridge enable=3, rx=rx2
- Stopped rx2 fridge cycle after two 4He cycles.
-
- 7_sidelobes_mapomast_01_001.sch
- Schedule changes since last sidelobes schedule include changes to MCE configuration (no flx_lp_init) and tried to fix the dk stall problem by slewing to el=88 before rotating dk.
- Attempted fix for the dk stall problem didn't work, so we again had to abort the schedule (but it was mostly complete).
- Source configuration as 111119 11:27:57, but fixed grounding for amplifier bias. New bias = 14.8 V / 0.99 A, Vsense = 9 V.
-
- 1_knoise_muxrate_8_001.sch
- Weather not great, some thin clouds.
- Aborted schedule to retry sidelobe mapping.
-
- 7_sidelobes_mapomast_00_001.sch
- Schedule to search for sidelobes using broad-band noise source on the MAPO mast.
- BBNS configuration:
- Output is bare WR-6. Linearly polarized in vertical direction.
- Attenuator 06-2220 set to 2.0 (0 dB)
- Attenuator Hughes set to 4.0 (0 dB)
- Amplifier bias = 12.8 V / 1.01 A, Vsense = 9.8 V
- 18 Hz TTL signal for chop
- Source alignment looks good. For a receiver rotated to the bottom of the drum, we think that it should be pretty close to the source for az = -22, el = 46. Defined this position in source.cat as “kMapoCal”
- Start the schedule at dk=-98, which puts rx0 at the bottom of the drum. Rotate dk in the negative direction during the schedule to move rx2 to the bottom of the drum.
- Manual SQUID tuning and TES bias. Biased all detectors to 20000 (Al transition).
- rx2 is still cycling, not turned on for this schedule.
- Schedule stalled partway through because we couldn't rotate dk at low elevation with imbalanced load. Aborted the schedule when we realized this.
-
- cycleFridge enable=1, rx=rx0
- cycleFridge enable=3, rx=rx2
- Cycling fridges to get detectors cold after accidental warmup.
- rx0 was in pretty good shape, so just a quick single bump that finished at 111119 10:14:53
- Requested a triple cycle for rx2, but then the cycle was going very well, so we aborted and manually finished it at the end of the second 4He cycle: 111119 13:01:44.
-
- 1_knoise_muxrate_7_000.sch
- Attempt to fix latching detectors in 1_knoise_muxrate_6_000.sch
- added 30s wait after tunings
- Each bias step now contains a tes_bias bump at 65000 for .2s then and then a 200s wait for recovery
-
- cycleFridge enable=1, rx=rx0
- Quick single bump to make sure that rx0 holds through the upcoming observations.
-
- 8_fridgecycle_001.sch
- cycleFridge enable=2, rx=rx0+rx2
- Again, rx0 just didn't cycle (see 111113 11:45:42).
-
- 1_noise_muxrate_6_000.sch
- Comparing 15 kHz and 20 kHz mux rates with new MCE firmware (flashed on rx0 and rx2 MCEs).
- 15 kHz tuning recorded in /data/keckdaq/tuning/tune_15kHz_newfw; 20 kHz tuning recorded in /data/keckdaq/tuning/tune_20kHz_newfw (on keck33 and keck35 for rx0 and rx2, respectively).
- Weather is hazy at the start of the schedule, but looks very good by morning.
-
- 7_dkrot_04_009.sch
- Repeat of previous schedule.
- Weather still a bit hazy.
-
- 7_dkrot_04_008.sch
- New autotune before starting this schedule: rx0 = 111118_040013, rx2 = 111118_040018.
- Updated init_TES in schedlib to use biases derived from Jamie's posting (2011 Nov 17: Responsivity rx0, rx2), but tweaked to avoid cliffs.
- rx0 TES bias: 1800 1800 1800 1800 2400 1900 2400 0 0 2500 2800 2800 2700 2700 2700 2700
- rx2 TES bias: 0 1800 2500 2600 3000 0 3200 3200 1500 1500 1500 1500 2500 2400 2600 2600
- Weather degrading slightly. Hazy.
-
- Measuring mirror vs sky data.
- rx0 load curves:
- Ti_loading_rx0_zenith_268mK
- Ti_loading_rx0_zenith_266mK
- Ti_loading_rx0_mirror_268mK
- Ti_loading_rx0_el55_268mK
- rx1 load curves:
- Ti_loading_rx2_zenith_269mK
- Ti_loading_rx2_zenith_265mK
- Ti_loading_rx2_mirror_269mK
- Ti_loading_rx2_mirror_2_269mK
- Ti_loading_rx2_el55_2_269mK
- Ti_loading_rx2_el55_269mK
-
- cycleFridge enable=2, rx=rx2
-
- Testing with BICEP2 spare MCE on rx2.
-
- cycleFridge enable=2, rx=rx0+rx2
-
- Testing new MCE firmware.
- Updated MCE firmware on rx2 MCE, using USB bit blaster.
- Took raw mux and settling time data before and after firmware update. Updated python_tools on keck35.
- Took SQUID tunings as several values of row_len:
- ctime 1321418036: row_len = 98
- ctime 1321418429: row_len = 75
- ctime 1321418875: row_len = 60
-
- cycleFridge enable=2, rx=rx2
-
- Updated one parameter for rx2 fridge cycle and restarted antenna layer.
- he4_evap_target_final increased from 1.0 to 1.25 in K1.cfg
-
- UC enthalpy measurement.
- Turned on rx0 FPU TCM heater to 4.5 volts at 2011-Nov-15 10:05:33
- Turned on rx2 FPU TCM heater to 4.5 volts at 2011-Nov-15 11:07:48
- The UC evap for rx2 warmed up around 2011-Nov-15 19:00:00
- Turned on rx0 FPU spare heater (1 MΩ) to 4.5 volts at 2011-Nov-15 19:44:10
- The UC evap for rx0 warmed up around 2011-Nov-16 09:00:00
-
- cycleFridge enable=2, rx=rx0+rx2
- Still haven't updated rx2 fridge cycle parameters, so we aborted at the end of the second He-4 cycle, while it was still waiting for the He-4 evap to slowly approach 1K. Manually threw the He-3 heat switch with He-4 evap at ∼1.25K.
-
- 1_knoise_responsivity_7_012.sch
- WX very good
- Now using mce_lasttune, which should implement previous tuning.
-
- mce_autotune.sch
- On keck33 (rx0): 111115_031010.config_mce_auto_setup, 111115_031010.experiment.cfg
- On keck35 (rx2): 111115_031015.config_mce_auto_setup, 111115_031015.experiment.cfg
-
- 7_dkrot_06_001.sch
- Previous schedule used too low biases for rx2. Based on Jamie's analysis of 1_knoise_responsivity_8_000.sch, we chose rx2 biases that are uniformly 500 bits lower than the ones defined in schedlib.
- rx2 TES bias: 0 2500 2500 2800 2800 0 2900 3300 1300 1300 1300 1600 2300 2200 2400 2400
-
- 7_dkrot_06_000.sch
- Hacked the schedule to set lower TES biases for rx2: 0 1500 1500 1500 1500 0 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
- These biases turned out to be too low for tiles 1, 2, and 4 (ok for tile 3).
-
- 1_knoise_responsivity_8_000.sch
- Removed the mce_lasttune command from the schedule, so that we are using the SQUID tuning from the most recent auto_setup: ctime = 1321301888 (rx0), 1321301892 (rx2).
- WX very good
-
- 7_dkrot_05_000.sch
- With forebaffles.
- Removed the mce_lasttune command from the schedule, so that we are using the SQUID tuning from the most recent auto_setup: ctime = 1321301888 (rx0), 1321301892 (rx2).
- Bad data -- rx0 detectors get very noisy for the middle period of the schedule. rx2 detectors show almost zero signal.
-
- cycleFridge enable=2, rx=rx0+rx2
- Both Colin and Zak independently started fridge cycles within 10 minutes of each other, by accident. Starting the second fridge cycle does not seem to have interrupted the first one.
- Though enable was set to 2, rx0 executed a triple cycle; rx2 was caught just before starting its third He-4 cycle and the He-3 heat switch was thrown manually.
-
- 3_keck_rx02_4Kloading_000.sch
- 4K loading measurement for rx0 + rx2.
- Didn't wait for the IC/UC to run out. Usually we would wait for this, but it probably doesn't make much difference.
- Aborted the first attempt at this schedule because we forgot to turn off FPU temperature control.
- Shortly after starting the schedule for the second time, we realized that the telescope was at el=55°. At that point, we slewed it up to zenith; we think that happened early enough that it shouldn't affect the data.
-
- 1_knoise_responsivity_7_011.sch
- With forebaffles.
- Bad data -- very noisy (using the wrong SQUID tuning).
-
- 7_dkrot_04_007.sch
- With forebaffles.
- Bad data -- very noisy (using the wrong SQUID tuning).
-
- Zenith sky loading with and without forebaffles
- Ti load curves with the telescope pointing at zenith, before and after forebaffle installation.
- Good weather -- clouds on the horizon in one direction but very clear overhead.
- Regulating FPU temperature using do_pid_both (i.e. standard TCM temperature control).
- Before forebaffle installation:
- Ti_RX0_sky_267mK
- Ti_RX0_sky_267bmK
- Ti_RX2_sky_272mK
- After forebaffle installation:
- Ti_RX0_sky_after1_268bmK
- Ti_RX0_sky_after_long_268bmK
- Ti_RX0_sky_after2_269bmK
- Ti_RX2_sky_after1_272mK
- Ti_RX2_sky_after_long_272mK
- Ti_RX2_sky_after2_273mK
-
- 7_dkrot_04_006.sch
- No forebaffles. Checked windows for snow before starting the schedule.
- Bad data -- very noisy (using the wrong SQUID tuning).
-
- 8_fridgecycle_000.sch
- cycleFridge enable=2, rx=rx0+rx2
- rx2 cycled, but it looks like the fridge cycle program never ran for rx0. We don't know what caused the failure.
-
- Optical efficiency measurement for rx2.
- Tuned SQUIDs with auto_setup -- ctime = 1321168089. Two columns out (we think this is the same as during the season).
- Window cozy is off for this measurement.
- Heated FPU using FPU Cu TCM and then adjusted heater voltage to hold FPU at 275 mK for all load curves.
- Sky loading:
- Al_loadcurve_RX2_skytest4_275mK
- Al_loadcurve_RX2_skytest4b_275mK
- Ambient temperature cone:
- Al_loadcurve_RX2_300K_275mK
- Al_loadcurve_RX2_300Kb_275mK
- 77K cone, first try:
- Al_loadcurve_RX2_77K_275mK
- Al_loadcurve_RX2_77Kb_275mK
- 77K cone, second try:
- Al_loadcurve_RX2_77Kc_275mK
- Al_loadcurve_RX2_77Kd_275mK
- Mirror on:
- Al_loadcurve_RX2_mirror_275mK
- Al_loadcurve_RX2_mirrorb_275mK
-
- 2_keck_rx0_UCloading_000.sch
-
- 1_keck_rx0_ICloading_001.sch
- Restarted IC loading schedule after mce_zero_bias.
-
- 1_keck_rx0_ICloading_000.sch
- He-4 evaporator was already warm before starting this schedule.
- Aborted schedule after we realized that we left all TES on, biased to 7000.
-
- cycleFridge enable=2, rx=rx2
- Manually aborted the fridge cycle because it was taking too long for the He-4 evaporator temperature to asymptotically approach 1K. Threw the He-3 heat switch by hand with He-4 evap at ∼1.05K. We should update the hkconf file so that this fridge switches the He-3 heat switch at a He-4 evap temperature of 1.1K or 1.15K (for the last He-4 cycle).
-
- Optical efficiency measurement for rx0.
- Tuned SQUIDs with auto_setup -- ctime = 1321141351. Tuning looks similar to last run, except row 22 is out (it was also out early last observing season).
- Spent a while determining the best Al load curve to run.
- Removed cozies, so that the eccosorb cone could sit directly on the window.
- Heated FPU using TCM and then adjusted heater voltage to hold the FPU at 284 mK for all load curves.
- Mirror on:
- Al_loadcurve_mirror_284mK
- Ambient temperature cone:
- Al_loadcurve_300K_284mK
- Al_loadcurve_300Kb_284mK
- 77K cone, first try:
- Al_loadcurve_77K_284mK
- Al_loadcurve_77Kb_284mK
- 77K cone, second try:
- Al_loadcurve_77Kc_284mK
- Al_loadcurve_77Kd_284mK
- Al_loadcurve_77Ke_284mK
- Al_loadcurve_77Kf_284mK
- Al_loadcurve_77Kg_284mK
- Sky loading:
- Al_loadcurve_sky_284mK
- Al_loadcurve_skyb_284mK
-
- cycleFridge enable=2, rx=rx0
-
- Started rx2 (K1) cooldown in mount.
- Compressor He pressure = 235 psi.
- Mount turbopump connected to rx0 and rx2.
- Valved off cryostat at 2011-11-11 00:29 UTC; 4K temperatures dropped by ∼4K.
-
- Started rx0 (K3) cooldown in mount.
- Compressor He pressure = 230 psi.
- Mount turbopump connected to rx0 and rx2; pressure at 3.6e-4 Torr.
- Valved off cryostat at 2011-11-11 00:29 UTC; 4K temperatures rose by about 1K.
keckdaq Run 2 (Rx0, Rx1, Rx2; Feb 2011 - Oct 2011)
LINKS:
keckdaq Run 9 |
keckdaq Run 8 |
keckdaq Run 7 |
keckdaq RUn 6 |
keckdaq Run 5 |
keckdaq Run 4 |
keckdaq Run 3 |
keckdaq Run 1 |
keckdaq Run 0 |
mapodaq (Summer 2010-2011)
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_095.sch
- 111031 22:19:58 abort_schedule
- start warm up on rx1 and rx2
- start warm up on rx0
- compressors, AHU, glycol pump are off
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_095.sch
- abort_schedule at the beginning, some az problems
- 111028 05:00:01 Starting schedule: /data/keckdaq/autoqueue/pending/1_keck_3rx_ICloading_003.sch
- 111029 02:50:54 Starting schedule: /data/keckdaq/autoqueue/pending/2_keck_3rx_UCloading_003.sch
- 111029 08:21:14 Starting schedule: /data/keckdaq/autoqueue/pending/3_keck_3rx_4Kloading_003.sch
- windows clear, some snow in the baffle
- weather: overcasted, blowing snow
-
- fridge cycle, double for rx=0+1+2
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_094.sch
- telescope didn't move for first half of the run, forgot to enable pmac
- 111024 06:56:10 abort_schedule
- rx0 didn't like the 2 single cycles and rx2 is getting to warm as well
- 111025 10:13:54 abort_schedule
- 111025 10:14:57 Starting schedule: /data/keckdaq/autoqueue/pending/1_keck_3rx_ICloading_002.sch
- 111025 16:30:39 Starting schedule: /data/keckdaq/autoqueue/pending/2_keck_3rx_UCloading_002.sch
- 111025 22:00:58 Starting schedule: /data/keckdaq/autoqueue/pending/3_keck_3rx_4Kloading_002.sch
- az and AlpCar are good, AlpCar less than .8 arcmin difference
- windows clear, no snow in the baffle
- weather: clear, wind picking up
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_093.sch
- telescope didn't move for first half of the run, forgot to enable pmac
- 111024 06:56:10 abort_schedule
- rx0 didn't like the 2 single cycles and rx2 is getting to warm as well
- NO HWP rotation!!!, will adjust according to schedules before next rotation
- Colin confirmed that we are right now at 90 deg
- az is good
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2 to about 290 psi
- problems with He4evap had to do two single cycles for rx0
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_092.sch
- az and AlpCar are good, AlpCar less than .8 arcmin difference
- windows clear, a bit of snow in the baffle
- weather: clearing
-
- /home/keck/sch/mce_autotune.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_091.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az is good, bad weather, can't see AlpCar
- windows clear, snow in the baffle
- weather: overcasted, windy, blowing snow
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1
- rx0 He4 evap lost signal before the fridge cycle, had to finish it manually
- He4 evap came back about 12h later again
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_090.sch
- turbo pump is running in the mount
- 111017 23:36:39 suspend_schedule
- working on MCE, trying to bring rx1 online
- run crashed
- /home/keck/sch/mce_autotune.sch
- 111018 00:49:33 Starting schedule: /data/keckdaq/autoqueue/pending/9_kCMB_40_090.sch
- 111018 21:34:23 suspend_schedule
- az diff value over 100k
- 111018 21:46:00 resume_schedule
- az and AlpCar are good, just homed a few hours before
- windows clear, a bit of snow in the baffle
- weather: clear, getting overcasted, wind shifting to NW
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_089.sch
- turbo pump is running in the mount
- az and AlpCar are good, AlpCar less than 1 arcmin difference
- windows clear, a bit of snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- restarted sync box
- restarted gcp and masd
- fridge cycle, double for rx=0
- 111015 02:10 started cooldown on rx2
- first fridge cycle, double for rx=1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_088.sch
- turbo pump is running in the mount
- 111013 23:37:13 suspend_schedule
- problems with A2 readhead
- 111014 00:04:56 resume_schedule
- az and AlpCar are good, AlpCar less than 1.6 arcmin difference
- windows clear, no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0
- /home/keck/sch/starpoint_pole_keck_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_087.sch
- turbo pump is running in the mount
- az and AlpCar are good, AlpCar less than .8 arcmin difference
- windows clear, no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0
- 111011 02:00 starting cool down of rx1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_086.sch
- turbo pump is running in the mount
- az and AlpCar are good, AlpCar less than .7 arcmin difference
- windows clear, no snow in the baffle
- weather: clear
-
- fridge cycle, double for rx=0
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_085.sch
- turbo pump is running in the mount
- don't know why it only run for a day but it was finished !? asked for HWP rotation which I ignore for now
- az and AlpCar are good, AlpCar less than .7 arcmin difference
- windows clear, a bit of snow in the baffle
- weather: clear
-
- fridge cycle, double for rx=0
- restarted fridgecycle again
- He4 evap sensor doesn't show any reading, cycle stalled, finished it by hand
-
- /home/keck/sch/runstartrx0.sch
- fridge cycle, double for rx=0
- spudws1 froze, restarted gcp amd masd, had to restart keck31
- some communication problems with keckviewer and keck32, would not take fridge commands
- 111007 20:37 got everything running again, now dealing with rx0 fridge cycle
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_084.sch
- turbo pump is running in the mount
- az and AlpCar are good, AlpCar less than 1 arcmin difference
- windows clear, a bit of snow in the baffle
- weather: clear, light blowing snow
-
- /home/keck/sch/runstartrx0.sch
- fridge cycle, double for rx=0
-
- /home/keck/sch/runstartrx0.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_083.sch
- turbo pump is running in the mount
- 111003 20:33:49 suspend_schedule
- jumps in az diff, data still good, but before it gets over 100k I rehomed and cleaned readhead
- 111003 20:41:51 resume_schedule
- az and is good, optical camera still frosted over
- windows clear, quite a bit of snow in the baffle
- weather: occasional high winds, falling snow
-
- fridge cycle, double for rx=0, accidentally there were 2 doubles behind each other
- aborted the 2nd double and only did one more single
- Starting warm up for rx1 and rx2
- rx2 has larger pressure loss, 50 psi in about 14 h - getting worse
- opened valve to rx2, pressure dropped from 5.5*10^-5 torr to 1.8*10^-5 torr
- opened valve to rx1, no change in pressure stayed at 2.4*10^-5 torr
- shut off compressors for rx1 and rx2 at 02:16
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_082.sch
- turbo pump is running in the mount, to see if telescope motion makes it fail
- 111001 03:18:13 abort_schedule
- starting loading schedules
- 111001 03:23:40 Starting schedule: /data/keckdaq/autoqueue/pending/1_keck_3rx_ICloading.sch
- 111001 09:39:25 Starting schedule: /data/keckdaq/autoqueue/pending/2_keck_3rx_UCloading.sch
- 111001 15:09:45 Starting schedule: /data/keckdaq/autoqueue/pending/3_keck_3rx_4Kloading.sch
- rx2 has massive pressure loss, 70psi in 2 days!!
- recharged rx2 to about 290 psi
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- turbo pump is running in the mount, to see if telescope motion makes it fail
- after recharging rx2, fridgecycle finished successfully
- installed jumpers as indicated
- restarted gcp and masd
- swaped MCE cards as indicated
- 110930 03:53:08 changed rx1 card 2 with rx2 card 2
- 110930 04:05:03 changed rx1 card 3 with rx2 card 3
- cards are back at original positions
-
- loading measurements
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_keck_3rx_internal_loading.sch
- no real change in the temperatures, trying to increase the power
- changed tcModule 6, x to 6,10,15 and 20
- 110927 02:38:13 Starting schedule: /data/keckdaq/autoqueue/pending/9_keck_3rx_internal_loading.sch
- 110927 02:41:03 tcModule 6, 6, rx=rx0+rx1+rx2
- 110927 02:41:03 Antenna0: TCM heater voltage out of range.
- trying different heater
- 110927 02:52:59 miscHeater 2, 3, rx=rx0+rx1+rx2
- not much effect either
- 110927 03:18:38 Starting schedule: /data/keckdaq/autoqueue/pending/9_keck_3rx_internal_loading_001.sch
- the new values show a small effect in the bottom spittoon values
- UC loading shows easily
- hasn't blown UC and IC yet so schedule got stuck
- 110927 23:32:05 abort_schedule
- Zak applied heat to the pumps and switches to blow the fridge
- 110928 00:33:40 Starting schedule: /data/keckdaq/autoqueue/pending/9_keck_3rx_internal_loading_002.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_081.sch
- turbo pump is running in the mount, to see if telescope motion makes it fail
- 110926 21:53:43 abort_schedule
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az good
- windows very little snow between the holes around the outside, lots of snow in the baffle
- weather: storm and blowing snow
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- turbo pump is running in the mount, to see if telescope motion makes it fail
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_080.sch
- turbo pump is running in the mount, to see if telescope motion makes it fail
- az and AlpCar are good, AlpCar less than 1.1 arcmin difference
- windows very little snow between the holes around the outside, lots of snow in the baffle
- weather: storm and blowing snow
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- turbo pump is running in the mount, to see if telescope motion makes it fail
- recharged rx2 to about 290 psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_079.sch
- turbo pump is running in the mount, to see if telescope motion makes it fail
- HWP rotation -135 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows, a few small patches of snow, lots of snow in the baffle
- weather: big storm and blowing snow, towards the end a break in the storm
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- turbo pump is running in the mount, to see if telescope motion makes it fail
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_078.sch
- az and AlpCar are good, AlpCar less than 1.1 arcmin difference
- windows very little snow between the holes around the outside, lots of snow in the baffle
- weather: storm and blowing snow
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2 to about 290 psi
- 110920 06:34:26 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_077.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than .2 arcmin difference
- windows clear, little bit snow in the baffle
- weather: windy, blowing snow, clear overhead
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_076.sch
- az and AlpCar are good, AlpCar less than 1.1 arcmin difference
- windows clear, a bit of snow in the baffles, half of the baffles covered with a 3mm layer of snow
- weather: clear, very cold -70C to windy with blowing snow
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2 to about 290 psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_075.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- had some unexplainable flow fluctuations of the pump for the glycol loop, while investigating
- pressure in the glycol system - all three compressors overheated in about 20s and shut off
- compressors could be restarted after a few minutes, no impact on data since we it was during
- HWP rotation, only minimal warm up, the runend.sch was running with rx=0 at .310K
- az and AlpCar are good, AlpCar less than 1.1 arcmin difference
- windows clear, no snow in the baffle
- weather: clear, very cold -70C
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_074.sch
- az and AlpCar are good, AlpCar less than 1.1 arcmin difference
- windows clear, no snow in the baffle
- weather: clear, very cold -70C
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_073.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than 1.1 arcmin difference
- windows clear, no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- restart gcp and masd
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_072.sch
- az and AlpCar are good, AlpCar less than 1.1 arcmin difference
- windows clear, no snow in the baffle
- weather: clear, cold
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=1+2
- Sarah is doing some tuning on rx0
- fridge cycle, double for rx=0
- recharged rx2 to about 290 psi
-
- Sarah did some tuning
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_071.sch
- 110907 18:58:24 suspend_schedule
- big az diff jump on readhead 3A, had to change bearings and pin, data are good until jump
- 110907 20:19:34 resume_schedule
- HWP rotation -135 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, data are good except for the jump of az diff
- windows clear, no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- schedule /home/keck/sch/starpoint_pole_keck_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_070.sch
- 110905 23:53:18 suspend_schedule
- jump on readhead 2A, pointing good just before jump over 100000
- 110906 00:06:25 resume_schedule
- az and AlpCar are good for az diff values <100k
- windows clear, no snow in the baffle
- weather: a bit haze, warming up
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_069.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than 1.2 arcmin difference
- windows clear, no snow in the baffle
- weather: clear, cold
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2 to about 290 psi
-
- /home/keck/sch/mce_autotune.sch
- some tuning for Sarah
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_068.sch
- 110901 21:35:28 suspend_schedule
- big jump in az diff on readhead 3, data are good until that jump and after second resume
- 110901 22:36:44 resume_schedule
- az and AlpCar are good, AlpCar less than .23 arcmin difference (rehomed only a few hours before !)
- windows clear, no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=1+2
- fridge cycle, double for rx=0
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_067.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than .7 arcmin difference
- windows clear, no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_066.sch
- az and AlpCar are good, AlpCar less than 1.2 arcmin difference
- windows clear, no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2 to about 290 psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_065.sch
- 110825 13:01:12 suspend_schedule
- jump in az diff on readhead 3, checked and rehomed
- 110825 13:16:16 resume_schedule
- 110825 22:03:38 suspend_schedule
- jump in az diff on readhead 3, checked and rehomed
- 110825 22:10:42 resume_schedule
- connected HWP boxes back to internal power and then rotated first back -90 and then +45 so we are in sync with the schedules again
- HWP have to be rotated after each other, since both motors have to run of onw port now
- no more disturbance of the optical camera
- HWP rotation -90 degrees on rx1 and rx2, looks good from plots
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than 1 arcmin difference
- windows clear, tiny bit of snow and ice in the baffle
- weather: mostly clear, getting colder
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- 110825 08:47:19 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
- not perfect conditions but ok
-
- some startup problems, not mce0 did not respond, had to restart gcp and masd, did new autotune
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_064.sch
- az and AlpCar are good, AlpCar less than 1 arcmin difference
- windows clear, little snow and ice in the baffle
- weather: getting clearer, still haze, windy & warm
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- spudws1 froze up, had to restart, restarted gcp and masd
- /home/keck/sch/mce_autotune.sch
- Sarah did some tuning online
- /data/keckdaq/autoqueue/pending/1_superfastnoise_1_002.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/1_knoise_muxrate_4_002.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_063.sch
- 110821 12:58:47 suspend_schedule
- pointing is good, but quick rehome between scans, because I forgot it after the last testrun
- 110821 13:03:11 resume_schedule
- major az diff jump (>36M), aborted run 110822 21:24:34
- Sarah is doing some tuning
- no HWP rotation yet
- az and AlpCar are good, until jump of az diff over 100k
- windows clear, little bit snow, ice in the baffle
- weather:overcasted, little snowfall, hot, only -36C
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2 to about 290 psi
- did some more testing on the HWP boxes, both HWP can be rotated separately if plugged into motor X
- problem seems to be with the motor driver box, but spare shows the same behavior
- position of HWP DID NOT change
-
- /home/keck/sch/mce_autotune.sch
- 25 kHz tuning by Sarah
- /data/keckdaq/autoqueue/pending/1_superfastnoise_1_001.sch
- /data/keckdaq/autoqueue/pending/1_knoise_muxrate_4_001.sch
- both schedules had problems
- /data/keckdaq/autoqueue/pending/9_kCMB_40_062.sch
- az is good, no stars are visible, but az diff values are very good
- windows clear, a bit of snow in the baffle
- weather: overcasted and windy, warm
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- HWP motor driver box gives high Amp reading (2.2A) disconnected power to both HWP boxes
-
- /home/keck/sch/mce_autotune.sch
- restarted masd
- /data/keckdaq/autoqueue/pending/9_kCMB_40_061.sch
- both HWP boxes are disconnected from power
- 110817 14:42:44 suspend_schedule
- problems with readhead 3, pointing STILL GOOD, rehomed
- 110817 15:09:02 resume_schedule
- NO waveplate rotation
- az and AlpCar are good, AlpCar less than .6 arcmin difference
- windows clear, little bit of snow in the baffle
- weather:clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- 110817 08:34:23 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
- both HWP boxes are disconnected from power
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_060.sch
- 110815 16:26:17 suspend_schedule
- az diff started to get bigger, to be on save side → rehomed
- 110815 16:35:41 resume_schedule
- 110817 01:18:45 Mediator: Lost scanner connection to Antenna0
- 110817 01:18:45 Mediator: Lost control connection to Antenna0
- antenna layer crashed, restarted control system, but that terminated the run
- testing HWP, but unresponsive
- az and AlpCar are good, AlpCar less than 1 arcmin difference
- windows clear, very little snow in the baffles
- weather:clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_059.sch
- 110814 12:41:25 suspend_schedule
- az diff jump, cleaned readhead A4, data should be good for az diff < 100k, rehomed
- 110814 12:56:44 resume_schedule
- 110730 02:32 HWP rotation +45 degrees on rx1 and rx2, DID NOT LOOK GOOD from plots
- it can be assumed that the HWP rotation did not happen !!!
- az and AlpCar are good, AlpCar less than .2 arcmin difference for second part of run
- windows clear, nearly no snow in the baffles
- weather:clear, a bit of haze
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2 to about 290 psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_058.sch
- az and AlpCar are good, AlpCar less than 1.5 arcmin difference
- windows clear, no snow in the baffle
- weather:clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- 110811 09:00:47 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_057.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than 1 arcmin difference
- windows clear, no snow in the baffle
- weather:clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- masd on keck34 crashed
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_056.sch
- power connected at HWP analog box
- az and AlpCar are still good, AlpCar less than 1.5 arcmin difference
- windows clear, no snow in the baffle
- weather:clear to haze
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_055.sch
- power disconnected at HWP analog box
- az and AlpCar are good, AlpCar less than 1 arcmin difference
- windows clear, no snow in the baffle
- weather:clear, bit windy
- power connected at HWP analog box
- HWP rotation -135 degrees on rx1 and rx2, looks good from plots
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_054.sch
- power disconnected at HWP analog box
- 110804 11:01:17 suspend_schedule
- az diff jump, AlpCar are still good, AlpCar less than 4 arcmin difference
- so all data should be good
- 110804 11:15:57 resume_schedule
- az and AlpCar are good, AlpCar less than .3 arcmin difference
- windows clear, no snow in the baffle
- weather:clear
- /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_053.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- power disconnected at HWP analog box
- az and AlpCar are good, AlpCar less than 2 arcmin difference
- windows clear, no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_052.sch
- az is good and AlpCar should be still good, AlpCar less than 4 arcmin difference
- windows clear, no snow in the baffle
- weather:clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2 to about 290 psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_051.sch
- 110729 21:09:27 suspend_schedule
- az diff jump, rehomed
- 110729 21:12:51 resume_schedule
- 110730 01:22:02 abort_schedule, az diff jumps
- az is good for values below az diff < 100000
- 110730 02:32 HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- windows clear, nearly no snow in the baffle
- weather: clearing
- 110730 02:48:28 Starting schedule: /home/keck/sch/starpoint_pole_manu_summer.sch
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_050.sch
- az and AlpCar are good, AlpCar less than 1 arcmin difference
- windows clear, little snow in the baffle
- weather: overcasted, windy
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- had to restart masd, restarted gcp as well
- problems with mce0 initialization, restarted keck33
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_049.sch
- heat switches, were unset, brief temp rise on rx0 and rx1
- 110724 14:02 temps back to normal on rx1, rx0 still settling
- 110724 14:28 temps back to normal on rx0
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- aborted schedule a bit earlier due to pointing error
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, nearly no snow in the baffle
- weather: clear to overcasted very warm and windy towards the end
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_048.sch
- 110723 11:00:53 suspend_schedule
- jump in az diff but data STILL GOOD!!, rehomed
- 110723 11:08:43 resume_schedule
- az is good and AlpCar should be still good, AlpCar less than 4 arcmin difference
- windows clear, no snow in the baffle
- weather:clear getting cold
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2 to about 290 psi
-
- schedule accidentally started early, aborted schedule 110720 11:09:53-110720 11:59:04, disregard this one
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_047.sch
- 110721 01:58:50 suspend_schedule
- az diff jump, pointing good before jump over 100000, rehomed
- 110721 02:04:14 resume_schedule
- HWP rotation -135 degrees on rx1 and rx2, both plots look good
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, no snow in the baffle
- weather:haze, warm, clearing towards zenith
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_046.sch
- az and AlpCar are good, AlpCar less than 1 arcmin difference
- windows clear, no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2 to about 290 psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_045.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_dkrot_02_005.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_044.sch
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2 to about 290 psi
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_dkrot_02_004.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_043.sch
- 110713 15:30:26 suspend_schedule
- az diff going nuts
- 110713 16:42:54 resume_schedule
- 110713 23:29:58 suspend_schedule
- problems with A2 readhead roller, had to be exchanged, starting to wear down again
- 110714 00:20:21 resume_schedule
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good for time schedule is running and az diff < 100000
- windows clear, no snow in the baffle
- weather: clear
-
- /home/keck/sch/mce_autotune.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_dkrot_04_005.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_042.sch
- 110710 12:17:45 suspend_schedule
- big jump in az diff, rehomed
- 110710 12:29:31 resume_schedule
- 110712 05:46:18 suspend_schedule
- big jump in az diff, rehomed
- aborted schedule, problems with readheads
- pointing good for az diff < 100000
- windows clear, nearly no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- spudws1 froze - reboot
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_041.sch
- 110708 15:45:53 suspend_schedule
- worked on readhead 1
- 110708 15:59:14 resume_schedule
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- aborted schedule a bit earlier due to pointing error
- az and AlpCar are good, until jump of az diff over 100000 about 2h before runend
- windows clear, nearly no snow in the baffle
- weather: overcast to mostly clear
-
- /home/keck/sch/mce_autotune.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2 to about 290 psi
-
- /data/keckdaq/autoqueue/pending/7_dkrot_04_004.sch
-
- /home/keck/sch/mce_autotune.sch
- exchanged readhead A3
- /data/keckdaq/autoqueue/pending/9_kCMB_40_040.sch
- aborted schedule az diff went high
- pointing is off
- weather: overcasted
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_039.sch
- HWP rotation -135 degrees on rx1 and rx2, both plots look good
- az and AlpCar are good, AlpCar less than 1 arcmin difference
- windows clear, little snow and ice in the baffle
- weather: overcasted to clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_038.sch
- az and AlpCar are good, AlpCar less than .7 arcmin difference
- pointing IS GOOD, although az diff values had a jump!!!
- windows clear, nearly no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- 110703 13:49:43 restarted gcp and masd
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_dkrot_04_002.sch
- put cargo strap around baffles
- /data/keckdaq/autoqueue/pending/7_dkrot_04_003.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_037.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than 1.5 arcmin difference
- windows clear, nearly no snow in the baffle
- weather: haze
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_036.sch
- 110630 14:13:44 suspend_schedule
- az diff jump, took off readhead A4 and cleaned it, pointing still good !!! rehomed
- 110630 14:33:49 resume_schedule
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, nearly no snow in the baffle
- weather: clear, getting windy
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_dkrot_03_001.sch
- dk=0
- rx2
- 14:15:23 up for 30s
- 14:16:28 eccosorb for 30s
- 14:17:53 sideways (inward) for 30s
- 14:18:58 eccosorb for 30s
- rx0
- 14:20:13 up for 30s
- 14:21:13 eccosorb for 30s
- 14:22:33 sideways (inward) for 30s
- 14:23:23 eccosorb for 30s
- dk=180
- rx1
- 14:33:13 up for 30s
- 14:33:58 eccosorb for 30s
- 14:35:13 sideways (inward) for 30s
- 14:35:58 eccosorb for 30s
- rx0
- 14:37:13 up for 30s
- 14:38:03 eccosorb for 30s
- 14:29:13 sideways (inward) for 30s
- 14:40:13 eccosorb for 30s
- constant push inward or up on all occasions
- /data/keckdaq/autoqueue/pending/9_kCMB_40_035.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, no snow in the baffle
- weather: clear & cold
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_034.sch
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, nearly no snow in the baffle
- weather: clear
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_033.sch
- 110624 15:10:31 suspend_schedule
- jump in az diff, cleaned readheads and rehomed
- 110624 15:24:46 resume_schedule
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, nearly no snow in the baffle
- weather: clear
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_dkrot_03_001.sch
- dk=0
- 15:28:20 pressed up on rx2 for 30s, then got eccosorb and put an edge over the side where I pushed on
- pressed for 30s sideways on rx2 baffle, used eccosorb again
- pressed up for 30son rx0, then got eccosorb and put an edge over the side where I pushed on
- pressed for 30s sideways (outward) on rx0 baffle, could not use eccosorb here, can't reach
- dk=-180
- 15:48:20 pressed up on rx1 for 30s, then got eccosorb and put an edge over the side where I pushed on
- pressed for 30s sideways on rx1 baffle, used eccosorb again
- pressed up for 30son rx0, then got eccosorb and put an edge over the side where I pushed on
- pressed for 30s sideways (outward) on rx0 baffle, could not use eccosorb here, can't reach
- the start time are accurate, but the follow up times are rougher
- /data/keckdaq/autoqueue/pending/9_kCMB_40_032.sch
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, nearly no snow in the baffle
- weather: clear and cold
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_031.sch
- external diskarray on omega0 not running yet
- HWP rotation -135 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than .75 arcmin difference
- windows clear, nearly no snow in the baffle
- weather: clear
-
- fridge cycle, double for rx=0+1+2
- recharged rx2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_030.sch
- omega0 is running again, but ext disk array not
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, very little snow in the baffle
- weather: clear
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_dkrot_02_003.sch
- 14:42:37 pressed up for 30s ,pressed for 30s sideways on rx2 baffle
- 14:45:37 pressed up for 30s ,pressed for 30s sideways on rx0 baffle
- rx0 is the only baffle can noticeable be moved, rx1 and rx2 seemed very solid
- /data/keckdaq/autoqueue/pending/9_kCMB_40_029.sch
- 110617 06:25:05 suspend_schedule
- az diff value was way off, rehomed, data should be good until az diff sky rockets
- 110617 06:33:15
- around 110617 07:00 omega0 hung up
- az diff values off again, aborted run
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
-
- /home/keck/sch/runend.sch
- /home/keck/sch/runend3.sch - new schedule for all 3 receivers cold
- fridge cycle, double for rx=0+1+2
- recharged rx2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_028.sch
- 110616 23:58:48 suspend_schedule
- az diff rising, cleaned readheads, rehomed, pointing before suspending should be good
- 110616 00:14:22 resume_schedule
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, very little snow in the baffle
- weather: mostly overcast, haze, clearing towards the end
-
- fridge cycle, double for rx=0+1+2
-
- late run start because of az drive
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_027.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az is good, overcast no AlpCar but az diff values are great
- windows 2 to 3 inch snow patch in the middle of all windows, little snow in the baffle
- weather: partly clear to overcast, snow
-
- fridge cycle, double for rx=0+1+2
- recharged rx2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_026.sch
- had to restart masd
- az and AlpCar are good, AlpCar less than .75 arcmin difference
- windows clear, very little snow in the baffle
- weather: overcast for first 24 hours, clearing
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_025.sch
- rx1 warmed up early again, but not as much as the previous run
- az and AlpCar are ok, AlpCar about 2 arcmin difference
- windows clear, very little snow in the baffle
- weather: clear
-
- fridge cycle, double for rx=0+1+2
- recharged rx2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_024.sch
- 110607 14:57:01 suspend_schedule
- cleaned A3 readhead
- 110607 14:58:53 resume_schedule
- rx1 warmed up early
- az and AlpCar pointing was still on the screen,but AlpCar less than .5 degrees difference
- windows clear, very little snow in the baffle
- weather: overcast for first 24 hours, clearing
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_023.sch
- 110605 03:24:40 suspend_schedule
- az diff values rising, but pointing still good, rehomed
- 110605 03:40:44 resume_schedule
- 110605 21:51:34 suspend_schedule
- az diff values off, pointing not good, rehomed
- 110605 21:58:34 resume_schedule
- 110606 01:00:55 az diff values starting to drift off again
- ****
- ONLY DATA WITH LOW AZ DIFF VALUE AND BEFORE 110606 01:00:55 ARE USABLE
- ****
- halted all telescope movement to see if there is an influence on rx1 temperature
- conclusion: telescope movement can influence the receiver temperature, but is not the only reason!
- HWP rotation -135 degrees on rx1 and rx2, looks good from plots
- windows clear, very little snow in the baffle
- weather: slight overcast
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
- recharged rx2
-
- /data/keckdaq/autoqueue/pending/9_kCMB_40_022.sch
- 110603 23:31:33 suspend_schedule
- az diff values on readhead 1 were high, both A and B had debris in front of the window, rehomed
- 110603 23:42:53 resume_schedule
- it is save to assume the data for low az diff values (<30000) are good
- az and AlpCar are good, AlpCar less than .5 arcmin difference, for the end of the run
- windows clear, very little snow in the baffle
- weather: little hazy to clear
-
- /home/keck/sch/mce_autotune.sch
- restarted gcp and masd, masd2 on keck35 woudn't come on, had to reboot keck35
- restarted gcp and masd
- 110602 17:01:31 /data/keckdaq/autoqueue/pending/9_kCMB_40_022.sch
- aborted run, thing going a bit nuts!!
-
- /home/keck/sch/runend.sch
- fridge cycle, double for rx=0+1+2
-
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_009.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_010.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_021.sch
- power cycled compressor for rx1 at 12:20, did have an effect today
- 13:50 turned down intake air so there would be not oscillations, but still oscillations
- power cycled compressor for rx1 at 14:31,
- 110601 20:03:54 antenna layer crashed, no updates in Keckviewer all "0"
- 110601 23:37:37 restarting antenna brought everything back, but run won't resume
- aborted run
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than .5 arcmin difference - at least something
- windows clear, no snow in the baffle
- weather:hazy, clearing towards the end
-
- /home/keck/sch/mce_autotune.sch, rx2 was still cold at runend
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_020.sch
- az off by about 1/4 inch on telescope mark, but still some problems with the az readheads
- windows clear, no snow in the baffle
- weather: nice and clear
-
- /home/keck/sch/mce_autotune.sch, rx2 was still cold at runend
- fridge cycle, double for rx=0+1+2
- recharged rx2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_019.sch
- power cycled compressor for rx1 at 22:55, did not have any effect
- at around 03:00 ont the 29th the az diff values jumped again over 1 million, up to that pointing was probably good
- pointing was off about 1/2 an inch on the mark in the telescope (AlpCar was not on the screen)
- weather: clear and cold
-
- /home/keck/sch/mce_autotune.sch
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_018.sch
- 110527 12:48:30 suspended schedule to track AlpCar since az diff are so off
- az and AlpCar are off, az diff values around 2700000, aborted run
- windows clear, very little snow in the baffle
- weather:clear and cold, first time below -100F
-
- /home/keck/sch/runend.sch (implements autotuning for the cold receivers)
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_017.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- /home/keck/sch/starpoint_pole_keck_summer.sch
- az and AlpCar are good, AlpCar less than .75 arcmin difference, besides very high az diff values (200000)
- windows clear, little snow in the baffle
- weather:excellent, very clear
-
- fridge cycle, double for rx=0+1+2
- recharged rx2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_016.sch
- rx2 stayed cold until a few minutes before runend
- 110524 09:42:45 mceGeneric "$GCP_DIR/../masd/keck/scripts/mce_autotune /data/keckdaq/tuning", mce=mce0
- 110524 09:42:51 mceGeneric "$GCP_DIR/../masd/keck/scripts/mce_autotune /data/keckdaq/tuning", mce=mce1
- az and AlpCar are good, AlpCar less than .75 arcmin difference, besides very high az diff values (200000)
- windows clear, no snow in the baffle
- weather:very hazy, windy, but not much blowing snow, warm
-
- fridge cycle, double for rx=0+1+2
-
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_004.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_005.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_006.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_007.sch
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_008.sch
- 110522 08:59:41 mceGeneric "$GCP_DIR/../masd/keck/scripts/mce_lasttune /data/keckdaq/tuning", mce=mce0
- 110522 09:00:22 mceGeneric "$GCP_DIR/../masd/keck/scripts/mce_lasttune /data/keckdaq/tuning", mce=mce1
- restarted gcp and mas
- frame grabber doesn't show an image
- weather:some thin clouds and clear skies, very cold
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_015.sch
- antenna layer died, restart at 110521 14:24:40, log file got too big
- aborted run
- HWP rotation -135 degrees on rx1 and rx2, both plots look good
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, little snow in the baffle
- weather:some thin clouds and clear skies
-
- fridge cycle, double for rx=0+1+2
- recharged rx2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_014.sch
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, no snow in the baffle
- weather:some thin clouds and clear skies
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_013.sch
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- windows clear, no snow in the baffle
- weather:some thin clouds, mostly clear
-
- fridge cycle, double for rx=0+1+2
- recharged rx2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_012.sch
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, no snow in the baffle
- weather:haze, warm
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_011.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- rx1 warmed up 5 hours early
- az and AlpCar are good, AlpCar less than .5 arcmin difference (2 arcsec besides high az diff values)
- windows clear, little snow in the baffle
- weather:very good, cold and clear above
-
- fridge cycle, double for rx=0+1+2
- recharged rx2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_010.sch
- rx1 warmed up 12 hours early
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, little snow in the baffle
- weather:getting colder, very clear
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_temp_control_05_001.sch
- az and AlpCar are good, AlpCar about .5 arcmin difference
- windows clear, little snow in the baffle
- weather: wind and blowing snow in the first part, clear overhead, wind easing
-
- fridge cycle, double for rx=0+1+2
- recharged rx1 and rx2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_dkrot_02_002.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_009.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar about .5 arcmin difference
- windows clear, little snow in the baffle
- weather: wind and blowing snow, but mostly clear overhead
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/7_dkrot_02_001.sch
- aborted run 7_dkrot_02_001.sch at 110505 04:10:11 - seemed stuck
- /data/keckdaq/autoqueue/pending/9_kCMB_40_008.sch
- az and AlpCar are good, AlpCar about .5 arcmin difference
- windows clear, very little snow in the baffle
- weather: excellent, cold and clear, but wind is picking up
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_007.sch
- restarted 9_kCMB_40_007.sch, because pmac was not running yet
- HWP rotation -135 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than .5 arcmin difference (9 arcsec)
- windows clear, very little snow in the baffle
- weather: excellent, cold and clear
-
- fridge cycle, double for rx=0+1+2
- /home/keck/sch/starpoint_pole_keck_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_006.sch
- windows clear, little snow in the baffle
- az pointing is good
- weather: excellent, cold and clear
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_005.sch
- aborted schedule, az diffs were high again !??? Watching the telescope scan all green lights
- during tests before run az diffs were very low !????
- 110430 07:36:20 mceGeneric "/home/keck/turn_hwp/turn_hwp.sh rx1 45", mce=mce0
- 110430 07:36:35 mceGeneric "/home/keck/turn_hwp/turn_hwp.sh rx2 45", mce=mce0
-
- aborted cycles for rx=0+1+2
- fridge cycle, double for rx=0+1+2
-
- fridge cycle, double for rx=0+1+2
- recharged compressor for rx2
- high delta P triggered compressor shut off for rx2
- restarted fridge cycle for rx2 at 110429 11:14:47
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_004.sch
- aborted schedule, az error huge, run into limit, this run is no good
- A1 readhead caused problems, new adjustment, readjusted some magnets
- found problem with A1 readhead, this time it was the mounting bracket that locked up at certain postion, readjusted it, testing
-
- stopped gcp, powercycle 24 V, started gcp
- /home/keck/sch/mce_autotune.sch
- fridge cycle, double for rx=0+1+2
- 110427 19:01:41 mceGeneric "/home/keck/turn_hwp/turn_hwp.sh rx1 -45", mce=mce0
- 110427 19:04:01 mceGeneric "/home/keck/turn_hwp/turn_hwp.sh rx1 45", mce=mce0
- changed A1 4 times but didn't get a good read head,exchanged A1 and B2 readhead, still about 1cm off
- az problems are software this time not hardware, last run is good
-
- /data/keckdaq/autoqueue/pending/9_kCMB_40_003.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az few mm off!!!, problems with optical camera
- windows clear, little snow in the baffle
-
- fridge cycle, double for rx=0+1+2
-
- /data/keckdaq/autoqueue/pending/9_kCMB_40_002.sch
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, little snow in the baffle
-
- fridge cycle, double for rx=0+1+2
-
- /data/keckdaq/autoqueue/pending/9_kCMB_40_001.sch
- schedule aborted by Martin for tuning
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, little snow in the baffle
-
- fridge cycle, double for rx=0+1+2
-
- fridge cycle, double for rx=0+1+2
- screwed up, entered wrong pmac command → telescope went to the horizon
- aborted fridge cycle
- pumping on rx2 K1
- 110420 15:45:00 cycleFridge enable=2, rx=rx0+1
- stopped pumping on rx2 K1 after relevant temps were below 7K and turned on HS too cool down FPU
- 110421 01:40:10 cycleFridge enable=2, rx=rx2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_40_000.sch
- az and AlpCar are good, AlpCar less than .5 arcmin difference
- windows clear, less snow in the baffle
-
- fridge cycle, double for rx=0+1+2
- continue to clean az drive and telescope structure, adjusting read heads, testing
- recharged compressor for rx2
-
- fridge cycle, double for rx=0+1+2
- cleaning az drive and telescope structure
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_39_009.sch
- HWP rotation -135 degrees on rx1 and rx2, both plots look good
- az diff: az1=-415727, az2=-409227, az3=-400470, az4=15270, sumaz=-406961
- AlpCar about 30 arcmin off !!!
-
- fridge cycle, double for rx=0+1+2
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_39_008.sch
- after update from Walt, had to restart mas daemon as well, schedule crashed
- aborted schedule, problems with read head A1
- but pointing still good, right on az=0 mark, AlpCar about 1.5 arcmin off from before and after homing
- changed A1 readhead, looked good for first half of run az diff below 3000!!
-
- fridge cycle, double for rx=0+1+2
-
- /data/keckdaq/autoqueue/pending/9_kCMB_39_007.sch
- HWP rotation +45 degrees on rx1 and rx2, looks good from plots
- a bit of snow in the baffle, rx0 about 3 cm^2 on the window, strong winds and blowing snow
- after run, pointing looked good az=0 was back on mark, check on AlpCar
- az diff: az1=5670, az2=14400, az3=-126, az4=-5804
- rehomed and checked again on AlpCar, very close to before home position (accuracy less than 1 arc minutes)
-
- fridge cycle, double for rx=0+1+2
-
- fridge cycle, double for rx=0+2, triple for rx=1
- aborted fridge cycle to implement changes
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_39_006.sch
- after run, pointing looked good az=0 was back on mark, check on AlpCar
- rehomed and checked again on AlpCar, very close to before home position (accuracy of arc minutes)
- a bit of snow in the baffle, also heaters are running at 100%, due to rotating the dk, some snow on the window, but looks like it was melting
- recharged compressor for rx2
-
- fridge cycle, double for rx=0+2, triple for rx=1
-
- /data/keckdaq/autoqueue/pending/9_kCMB_39_006.sch
- worked on az pointing, replaced read head A1 again,doing test run
- az=0 test is ok
-
- /data/keckdaq/autoqueue/pending/9_kCMB_39_006.sch
- worked on az pointing, doing test run
- aborted run, enc hw error on az A1
-
- fridge cycle, double for rx=0+2, triple for rx=1
-
- fridge cycle, double for rx=0+2, triple for rx=1
- trying to fix az pointing, mounted all magnets and exchanged 2 read heads - still problems
- spudws 1 crashed and after restarting antenna wouldn't communicate until reboot of keck 31
-
- /data/keckdaq/autoqueue/pending/7_dkrot_01_002.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_39_006.sch
- az pointing was off again
-
- fridge cycle, double for rx=0+2, triple for rx=1
- az was off again by about 1cm, the encoder readings are good, rehomed, az was good again
- /home/keck/sch/starpoint_pole_keck_summer.sch
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_39_005.sch
- HWP rotation +45 degrees on rx1 and rx2, both plots look good
- windows free, a bit of snow in the corner of the baffles, in one baffle the snow is mostly frozen to the edge
-
- fridge cycle, double for rx=0+2, triple for rx=1
-
- /data/keckdaq/autoqueue/pending/7_dkrot_01_001.sch
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_39_004.sch
- windows free, a bit of snow in the corner of two baffles
-
- fridge cycle, double for rx=0+2, triple for rx=1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_39_003.sch
- schedule stopped, had to restart mas, now schedule is running fine
- HWP rotation +45 degrees on rx1 and rx2, both plots look good
- windows free, a bit of snow in the corner of the baffles
-
- fridge cycle, double for rx=0+2, triple for rx=1
-
- changing blastbuster card for rx1, MB03/DACTX04 was swapped for MB08/DACTX03
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_39_002.sch
- HWP rotation 1x 135, 2x -135 degrees on rx1 and rx2
-
- fridge cycle, double for rx=0+2, triple for rx=1
-
- /data/keckdaq/autoqueue/pending/9_kCMB_39_001.sch
-
- fridge cycle, double for rx=0+2, triple for rx=1
-
- /home/keck/sch/mce_autotune.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_39_000.sch
-
- fridge cycle, double for rx=0+2, triple for rx=1
-
- /data/keckdaq/autoqueue/pending/9_kCMB_38_003.sch
-
- fridge cycle, double for rx=0+2, triple for rx=1
-
- trouble shooting HK glitches
- 22:40 disconnected backpacks
- 22:50 stopped gcp, turned off blastbuster
- reversed dip switches on MB01 and MB03
- 23:03 restart gcp
- 23:05 reconnected backpacks
- after multiple times restarting gcp and antenna, still can't get a lot of readouts on rx1 and rx2
- glitches seem to appear now on rx2 plots
- 23:39 powered backpacks off, stopped gcp
- put dip switches in original position, removed MB03 about 1 cm, reinserted card
- 23:44 started gcp, powered backpacks on
- some glitches on rx1
- 00:25 powered backpacks off, stopped gcp
- reversed cables from MB01 and MB03
- 00:36 started gcp, powered backpacks on
- lots of nan in rx1 and rx2
- glitches in rx1 plot
- 01:08 powered backpacks off, stopped gcp
- put cables back in right order
- 01:21 started gcp, powered backpacks on
-
- /data/keckdaq/autoqueue/pending/9_kCMB_37_000.sch
- aborted schedule to diagnose HK problems
-
- fridge cycle, double for all 3 receivers
- found problem with az drive - magnet on tape gap was missing, rehomed
-
- /data/keckdaq/autoqueue/pending/7_temp_control_04_001.sch
-
- fridge cycle, double for all 3 receivers
- az was off again, 2 limit switches were broken, rehomed
- /home/keck/sch/starpoint_pole_keck_summer.sch
-
- /data/keckdaq/autoqueue/pending/9_kCMB_37_002.sch
- HWP rotation +45 degrees on rx1 and rx2
- recharged compressor for rx2
-
- double fridge cycle on all receivers
-
- /data/keckdaq/autoqueue/pending/9_kCMB_37_001.sch
- HWP rotation
-
- double fridge cycle on all receivers with new adjustments
-
- double fridge cycle on all receivers
- rehomed telescope
-
- /data/keckdaq/autoqueue/pending/9_kCMB_37_000.sch
- aborted schedule run into az limit at az=-233
- az pointing was about 5 degrees off, that caused the problem
-
- problems with HK heater on rx1 caused heating
- double fridge cycle on all receivers
-
- fridge cycle double rx=0, single rx=1, rx=2
- rx1 didn't cool down far enough, started another double fridge cycle on all receivers
-
- /data/keckdaq/autoqueue/pending/9_kCMB_37_000.sch
- aborted schedule, 24 V powersupply died
-
- /home/keck/gcp/control/sch/mce_autotune.sch
- fixed clunking noise in az drive, 6 of the 12 big nuts holding the az ring down were lose
-
- double cycle on K3, single cycle on k1 and k2
- put more helium into k1 compressor
-
- /data/keckdaq/autoqueue/pending/9_kCMB_36c_dk068_002.sch
- K1 warmed up after about 40 h again, like the previous runs
-
- double cycle on all 3 receivers
-
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_002.sch
-
- adjusting thermal control for K2
-
- double cycle on K1, K2 and K3
-
- Checking HWP orientation.
- Rotated Rx1 HWP by +45° and then -45°.
- Rotated Rx2 HWP by +45° and then -45°.
- Suspended the currently running CMB schedule to do rotations. Left combine=5 on.
-
- /data/keckdaq/autoqueue/pending/1_knoise_responsivity_7_001.sch
- /data/keckdaq/autoqueue/pending/9_kCMB_36c_dk068_001.sch
- aborted CMB run, K1 and K2 warmed up
-
- tuning thermal control for K2
-
- running double cycle on all 3 fridges
-
- running /data/keckdaq/autoqueue/pending/9_kCMB_36b_dk068_001.sch
-
- running /data/keckdaq/autoqueue/pending/1_knoise_responsivity_6_001.sch
- started double fridge cycle on all 3 receivers at 110225 23:21:04
-
- K3 fridge run out
- started double cycle on all recievers
-
- started fridge cycle on K2
-
- keck32 /data was full, no old files are deleted, because of that archiving was off deleted files on keck32 manually, files were already on omega0
-
- changed back to downsample=5
- marked all files in /keckdaq/arc/as send since they are too big for satellite
-
- 7_temp_control_03_001.sch
- k1 and k3 cold, k2 cooling down
-
- Rotating Rx1 and Rx2 half-wave plates.
- Testing scripts, then 400° rotations to read the absolute encoders, followed by rotating both HWP to their zero position.
-
- Rotated Rx2 (K1) HWP by +45°.
- Actual rotation is +45°.
-
- cycleFridge enable=1, rx=rx0
-
- cycleFridge enable=2, rx=rx0+rx2
- Rx0 auto-cycle finished at UT 110212 20:11:37
- Rx2 auto-cycle was aborted and then manually cycled, ending up in a bad state.
keckdaq Run 1 (Rx0, Rx2; Feb 2011)
LINKS:
keckdaq Run 9 |
keckdaq Run 8 |
keckdaq Run 7 |
keckdaq Run 6 |
keckdaq Run 5 |
keckdaq Run 4 |
keckdaq Run 3 |
keckdaq Run 2 |
keckdaq Run 0 |
mapodaq (Summer 2010-2011)
-
- 7_ffflat_dslmast_12_003.sch
- Deep beam map using circularly polarized broad-band noise source.
- Far field flat in “new back position”.
- dk = +24°.
- Scan width = 22.8° height = 20°, scan speed = 0.4°/s, el step = 0.05°
- Source position is dslCal4: -178.25, 77.0
- K1 (Rx2) HWP position is +45°.
- K3 (Rx0) is running with shuffled row order.
- K3 (Rx0) is partially off the mirror.
- First attempt at running this schedule was aborted to cycle Rx2.
- This attempt at running the schedule was aborted in order to remove the mirror and load K2.
-
- cycleFridge enable=1, rx=rx2
-
- 7_ffflat_dslmast_12_002.sch
- Deep beam map using circularly polarized broad-band noise source.
- Far field flat in “new back position”.
- dk = +24°.
- Scan width = 22.8° height = 20°, scan speed = 0.4°/s, el step = 0.05°
- Source position is dslCal4: -178.25, 77.0
- K1 (Rx2) HWP position is 0°.
- K3 (Rx0) is running with shuffled row order.
- K3 (Rx0) is partially off the mirror.
-
- Rx2 HWP rotation to 0° position.
- Commanded -90°. Actual rotation was -88.875°.
- Rotated by an addition -1.125° to compensate. This rotation went the requested distance.
-
- 7_ffflat_dslmast_17_005.sch
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat in “new back position”.
- dk = +24°.
- Scan width = 26° height = 20°, scan speed = 2.0°/s, el step = 0.1°
- Source position is dslCal4: -178.25, 77.0
- K1 (Rx2) HWP position is +90°.
- K3 (Rx0) is running with shuffled row order.
- K3 (Rx0) is partially off the mirror.
-
- Rx2 HWP rotation to +90° position.
- Commanded +45°. Actual rotation was +44.75°
-
- 7_ffflat_dslmast_17_004.sch
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat in “new back position”.
- dk = +24°.
- Scan width = 26° height = 20°, scan speed = 2.0°/s, el step = 0.1°
- Source position is dslCal4: -178.25, 77.0
- K1 (Rx2) HWP position is +45°.
- K3 (Rx0) is running with shuffled row order.
- K3 (Rx0) is partially off the mirror.
- Initial attempt at running this schedule was aborted for fridge cycle.
-
- cycleFridge enable=2, rx=rx0+rx2
-
- Rx2 HWP rotation to 45° position.
- Commanded +45°. Actual rotation was +45°.
-
- 7_ffflat_dslmast_17_003.sch
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat in “new back position”.
- dk = +24°.
- Scan width = 26° height = 20°, scan speed = 2.0°/s, el step = 0.1°
- Source position is dslCal4: -178.25, 77.0
- K1 (Rx2) HWP position is 0°.
- K3 (Rx0) is partially off the mirror.
-
- 7_ffflat_dslmast_17_002.sch
- DSL fiber transmitter is fixed, so we have a chop reference again, but the source PIN diode switch is not fixed, so the source is not modulated.
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat in “new back position”.
- dk = +24°.
- Scan width = 26° height = 20°, scan speed = 2.0°/s, el step = 0.1°
- Source position is dslCal4: -178.25, 77.0
- K1 (Rx2) HWP position is 0°.
- K3 (Rx0) is partially off the mirror.
-
- 7_ffflat_dslmast_17_001.sch
- Partway through this schedule, the DSL fiber transmitter for the chop reference and the source PIN diode switch died.
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat in “new back position”.
- dk = +24°.
- Scan width = 26° height = 20°, scan speed = 2.0°/s, el step = 0.1°
- Source position is dslCal4: -178.25, 77.0
- K1 (Rx2) HWP position is 0°.
- K3 (Rx0) is partially off the mirror.
-
- 7_temp_control_02_001.sch
- Azimuth scans at nominal TES biases with no/slow/fast temperature control and scan speeds of 3.2, 3.0, 2.8, 2.6, 2.4, 2.2, and 2.0°/s.
- Far field flat returned to “new back position”.
- dk = -96°.
- Source position is AzCen1
- First attempt at running this schedule was aborted due to problems controlling fridge heaters.
-
- Manual fridge cycle.
- Combination of cycleFridge commands and frequent interruptions.
- Fridge cycle is thrown off at 110208 23:58:11 when config_hw.sch is run -- this schedule includes commands to turn on heat switches for all receivers, but pumps were hot at the time for rx2.
-
- Rx2 HWP rotation to get to nominal 0° position.
- Commanded +131.75°. Actual rotation is +132.125°. Rotation looks smooth.
- Commanded -0.375° to correct for overrotation. Encoder response analyze by eye to be between -0.25 and -0.375°.
-
- Rx2 HWP rotation to map out absolute encoder.
- Commanded +400°. Actual rotation is +372.25°. At several times, the HWP stopped moving (as shown by all four encoders) -- could be slipping or sticking?
-
- Manual fridge cycle.
- Combination of cycleFridge commands and frequent interruption -- ends up with 3-4 He-4 cycles. He-3 condensed at ∼1.1 K.
-
- cycleFridge enable=2, rx=rx0
keckdaq Run 0 (Rx0; Jan 2011 - Feb 2011)
LINKS:
keckdaq Run 9 |
keckdaq Run 8 |
keckdaq Run 7 |
keckdaq Run 6 |
keckdaq Run 5 |
keckdaq Run 4 |
keckdaq Run 3 |
keckdaq Run 2 |
keckdaq Run 1 |
mapodaq (Summer 2010-2011)
-
- starpoint_pole_keck_summer.sch
-
- site -44:39:00, -89:59:27.84, 2843
- Moved Keck site to match BICEP.
-
- starpoint_pole_keck_summer.sch
-
- 7_ffflat_dslmast_16_001.sch
- Schedule aborted to remove far field flat mirror and install Keck-1.
-
- 7_ffflat_dslmast_15_001.sch
- Deep beam map using circularly polarized broad-band noise source.
- Far field flat remains in “new back position”.
- dk = -156° (rotated by -120° from previous schedule).
- Scan width = 22.8° height = 20°, scan speed = 0.4°/s, el step = 0.05°
- Source position is dslCal4: -178.25, 77.0
-
- 7_temp_control_01_001.sch
- Azimuth scans at nominal TES biases at 2.8 and 2.4 degrees/second with no/slow/fast temperature control
- Far field flat in the front position
- Source position is AzCen1
-
- 7_ffflat_dslmast_14_001.sch
- Deep beam map using circularly polarized broad-band noise source.
- Far field flat remains in “new back position”.
- dk = -36° (rotated by +60° from previous schedule).
- Scan width = 22.8° height = 20°, scan speed = 0.4°/s, el step = 0.05°
- Source position is dslCal4: -178.25, 77.0
-
- 7_ffflat_dslmast_13_001.sch
- Deep beam map using circularly polarized broad-band noise source.
- Far field flat moved to “new back position”.
- dk = -96° (rotated by -120° from previous schedule).
- Scan width = 22.8°, height = 20°, scan speed = 0.4°/s, el step = 0.05°
- Source position is dslCal4: -178.25, 77.0
- Previous attempt at this schedule was aborted to cycle fridge.
-
- cycleFridge enable=2, rx=rx0
- First fridge cycle using updated code -- cycle parameters now stored in hk configuration files.
-
- 7_ffflat_dslmast_12_001.sch
- Deep beam map using circularly polarized broad-band noise source.
- Far field flat in the front position.
- dk = +24° (rotated by -60° from previous schedule).
- Scan width = 22.8°, height = 20°, scan speed = 0.4°/s, el step = 0.05°
- Source position is dslCal4: -178.25, 77.0
-
- 7_ffflat_dslmast_11_003.sch
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat in the front position.
- dk = -276° (rotated by -60° from previous schedule).
- Scan width = 26°, height = 20°, scan speed = 2.0°/s, el step = 0.1°
- New source position is dslCal4: -178.25, 77.0. This is the best source position for the far field flat in the front position.
- Two attempts at this schedule (7_ffflat_dslmast_11_00[1,2].sch) failed because the new source position hadn't been added with the catalog command.
-
- 7_ffflat_dslmast_10_001.sch
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat in the front position.
- dk = -216° (rotated by +30° from previous schedule).
- Scan width = 26°, height = 20°, scan speed = 2.0°/s, el step = 0.1°
- Source position is dslCal2: -178.25, 75.65
- First attempt to run this schedule was aborted due to MCE problems.
-
- 7_ffflat_dslmast_09_001.sch
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat in the front position.
- dk = -246° (rotated by +90° from previous schedule).
- Scan width = 26°, height = 20°, scan speed = 2.0°/s, el step = 0.1°
- Source position is dslCal2: -178.25, 75.65
-
- 7_ffflat_dslmast_08_001.sch
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat in the front position.
- dk = +24°
- Scan width = 26°, height = 20°, scan speed = 2.0°/s, el step = 0.1°
- Source position is dslCal2: -178.25, 75.65
-
- 7_ffflat_dslmast_07_001.sch
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat in the front position.
- dk = +24°
- Scan width = 26°, height = 14°, scan speed = 2.0°/s, el step = 0.1°
- Source position is reverted to dslCal2: -178.25, 75.65
- Elevation range of 14° is too small at this deck angle.
-
- 7_ffflat_dslmast_06_001.sch
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat has been moved to front position. Chris adjusted the solid model and found new leg positions to increase the mirror angle by 2.5°.
- dk = +24°, to move Keck-3 under the new mirror position.
- Scan width = 26°, height = 14°, scan speed = 2.0°/s, el step = 0.1°
- Source position is dslCal3: -178.25, 80.65 (elevation increased by 5° due to new mirror angle).
- Actual source position only shifts to 77.0° (1.35° increase), not 5° as expected.
- Elevation range of 14° is too small at this deck angle.
-
- fridge cycle
- Started a double cycle, but gcp crashed near the end of first He-4 cycle.
- When gcp was started back up, the He-4 evap was at 1.2K, so we just threw the He-3 heat switch to finish the cycle.
-
- 7_ffflat_dslmast_05_001.sch
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat is in back position.
- dk = -6°, rotated by 90° from previous scans.
- Scan width = 26°, height = 14°, scan speed = 2.0°/s, el step = 0.1°
- Source position is dslCal2: -178.25, 75.65
- Data is missing due to computer problems.
-
- 7_ffflat_dslmast_04_001.sch
- Slow beam map using circularly polarized broad-band noise source.
- Far field flat is in back position.
- dk = -96°
- Scan width = 22.8°, height = 20°, scan speed = 0.4°/s, el step = 0.05°
- Source position is dslCal2: -178.25, 75.65
-
- 7_ffflat_dslmast_03_001.sch
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat is in back position.
- dk = -96°
- Scan width = 26°, height = 14°, scan speed = 2.0°/s, el step = 0.1°
- New source position is dslCal2: -178.25, 75.65
-
- 7_ffflat_dslmast_02_001.sch
- Fast beam map using circularly polarized broad-band noise source.
- Far field flat is in back position -- Distances from base of rod to clamp = 22, 25.4, 55.8 inches.
- dk = -96°
- Scan width = 26°, height = 14°, scan speed = 2.0°/s, el step = 0.1°
- Using a guess for the source position -- dslCal1: -175, 80.5
-
- 7_ffflat_dslmast_01_002.sch
- Failed beam mapping attempt.
- Updated detector biases and tried beam mapping again… but still have the window cover on.
-
- 7_ffflat_dslmast_01_001.sch
- Failed beam mapping attempt -- window cover was on.
-
-
- cycleFridge enable=2, rx=rx0
-
- noise_slow_script
- 100 Hz data for 2000 (data_rate 150), at bias 2000, config_sync 1, Phil putting ffflat on mount
- With everything plugged in: noise_slow_base. Temp = 247.1
- 40dB filter added to sync box power supply: noise_slow_40dB_sync_filter. Temp=246.8. These were done with out the right sync box settings.
- 40dB filter added to sync box power supply: noise_slow_40dB_sync_filter_2. bias 4000
- Restarted with PID control on the temperature. 100 Hz data for 1000 and 400 kHz data for 1,000,000 samples. Both at 4000 bias (normal)
- noise_superfast_base = With everything in "nominal state" and mount parked. Phil messing around on top. noise_superfast_fewer_samples_base to make sure things are repeatable.
- noise_superfast_fewer_samples_40dB_sync_filter is with the 40dB AC filter
- noise_superfast_fewer_samples_90dB_sync_filter is with the 90dB AC filter
- noise_superfast_fewer_samples_sync_isotrans is with the isolation transformer (and maybe Phil)
- noise_superfast_fewer_samples_sync_isotrans_no_ground is with the isolation transformer and no ground pin
- noise_superfast_mce_psu_standoff same as last but with the mce psu off the mount (and maybe Phil, again)
- noise_superfast_mce_psu_bb_standoff same as last but with the BLASTbus off the mount (more Phil)
- noise_superfast_mce_psu_isotrans same as last but with the isolation transformer moved to the mce psu (slight Phil)
- noise_superfast_mce_psu_no_ground same as last but with no ground moved from sync to mce psu (lots of Phil)
- noise_superfast_mce_psu_no_ground_1 same (less Phil)
- noise_superfast_mce_psu_extra_ground same as last except with mce psu grounding introduced including an extra short from the mce ib to the mce psu
- noise_superfast_mce_psu2ib_ground same as last except with mce psu grounding through the mce ib only
-
- 1_knoise_muxrate_3d_004.sch
- Simultaneous responsivity measurement with BICEP2.
-
- Testing thermal stability during scan az-2p8-1p4b.
-
-
- Debugging partial_loadcurve.sch
-
- Calibrating Blastbus on the mount (MB03).
-
- 2_knoise_muxrate_3e_003.sch
- Cloudy weather.
-
- 1_knoise_muxrate_3d_004.sch
- Cloudy weather.
-
- Debugging config_hw.sch
- Partial load curve isn't working correctly.
-
- Calibrating Blastbus on the mount (MB05).
-
- 1_knoise_muxrate_3e_001.sch
-
- 1_knoise_muxrate_3d_001.sch
-
- cycleFridge enable=2, rx=rx0
-
- schedule: 1_knoise_muxrate_3c_003.sch
- Observing schedule to measure responsivity
- Takes advantage of new 5.1.2 firmware and programmable filters.
- Script aborted a couple times to make sure that clock card waveform generator was off
-
- Testing temperature control.
- setBias and configurePid commands. Changing heater voltages. Executing scan az-2p8-1p4b.
-
- 9_kCMB_36a_dk068_002.sch
- Some errors like “Too late for scanset cmb4-1430”, but many scansets ran successfully.
- Schedule aborted manually.
-
- cycleFridge enable=2
- Fridge cycle hung part way through, because He-4 evap thermometer log channel is broken -- fridge cycle routine was waiting for this thermometer to cool off before starting the second He-4 cycle. The fridge cycle was completed by manual intervention.
-
- 9_kCMB_36a_dk068_001.sch
- Schedule aborted manually.
-
- 1_knoise_muxrate_3c_002.sch
- Relatively good weather.
- Taken with 330 Hz sample rate, so that the MCE filter is below Nyquist.
-
- 9_kCMB_36a_dk068_001.sch
- Some errors like “Too late for scanset cmb4-1430”, but many scansets were completed successfully.
- Schedule aborted manually.
-
- 1_knoise_muxrate_3c_001.sch
- Not useful for analysis because the MCE filter was too fast for the sampling rate.
-
- do_partial_loadcurve.sch
- Ran schedule three times. On the first attempt, the partial load curve script was not generated.
-
- Testing temperature control.
- configurePid and setBias commands.
- Ran scan az-2p8-1p4b to study temperature stability during scanning.
-
- 1_knoise_muxrate_3b_001.sch
- Schedule aborted before finishing.
- Not useful for analysis because the MCE filter was too fast for the sampling rate.
-
- Testing NTD readout.
- Adjusted bias voltage, frequency, and phase; applied heater voltages.
-
- 1_knoise_muxrate_3_002.sch
- Schedule aborted before completion.
- Not useful for analysis because the MCE filter was too fast for the sampling rate.
-
- 1_knoise_muxrate_3_001.sch
- Eventually started after three aborted attempts.
- Schedule ran for the listed UT range, but was stopped before finishing.
- Not useful for analysis because the MCE filter was too fast for the sampling rate.
-
- 1_knoise_responsivity_5_004.sch
- Two aborted attempts to run this schedule.
- Not useful for analysis because the MCE filter was too fast for the sampling rate.
-
- cycleFridge enable=1
- gcp restarted before the cycle was finished -- turned on heat switches manually to finish cycle.
-
- starpoint_pole_keck_summer.sch
- Schedule aborted and restarted at 110116 04:47:00
-
- cycleFridge enable=2
- Fridge cycle stopped after one He-4 cycle.
-
- 1_knoise_responsivity_5_003.sch
- Several unsuccessful attempts to run this schedule. Finally ran it successfully for the listed UT range.
- Not useful for analysis because the MCE filter was too fast for the sampling rate.
-
- Testing MCE data acquisition
- Mediator had problems establishing scanner and control connections to mce0.
-
- Testing heaters and NTDs.
-
- Testing mce_autotune.sch
- Ran schedule a total of six times -- first three attempts failed, last three succeeded.
-
- 1_knoise_responsivity_5_002.sch
- Several unsuccessful attempts before the schedule was run.
- Not useful for analysis because the MCE filter was too fast for the sampling rate.
-
- 1_knoise_responsivity_5_001.sch
- A couple of unsuccessful attempts before the schedule was finally run.
- Not useful for analysis because the MCE filter was too fast for the sampling rate.
-
- Testing do_el_nod_sym1.sch
- Several repetitions of this schedule.
-
- Testing config_hw.sch
- Three repetitions of this schedule.
- Partial load curve script was not generated!
-
-
- Testing MCE, masd, schedules
- TES bias commands, start and stop acq, mce_generic.
- Ran config_syncbox.sch, mce_usetune.sch, mce_autotune.sch, config_hw.sch
-
- cycleFridge enable=2, rcvr=2; cycleFridge
- Looks like we were trying to cycle for rcvr 2 only, but it ran on all rcvr.
- Set enable=-1 for rcvr0+rcvr1 at 08:56:09.
-
- 9_kCMB_36a_dk068_xxx_test.sch
- Schedule manually aborted.
-
- 9_kCMB_36a_dk068_xxx_test.sch
- Schedule manually aborted.
-
- 9_kCMB_36a_dk068_xxx_test.sch
- Schedule manually aborted.
-
- Testing mount
- Tracking alpcar and alp1cen, scans az-2p8-1p4a and az-2p8-1p4b, mount slews
-
- Testing mount
- Tracking alpcar, scan az-2p8-1p4b, mount slews
-
- 9_kCMB_36a_dk068_xxx_test.sch
- Schedule manualy aborted.
-
- 9_kCMB_36a_dk068_xxx_test.sch
- Schedule manually aborted.
-
- Testing mount
- Tracking alpcar, offsets and slews in all axes
-
- Testing NTD bias (setBias command)
-
-
- Testing heaters
- tcModule heaters 1, 2, 3, 4
- miscHeater 7
-
- cycleFridge enable=2
- First gcp fridge cycle for Keck-3
-
- Testing mount
- mixture of tracking alpcar and scan az-2p8-1p4b